NCR FastLane SelfServ Checkout 7358 Manual

Kit Instructions
Non-Scale 2-Bag Bagwell Upgrade
7358-K122/K145
Issue B

ii
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR FastLane SelfServ™ Checkout is a trademark of NCR Corporation in the
United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms
and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR
office for information that is applicable and current.
Copyright © 2021
By NCR Corporation
Global Headquarters
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved

iii
Revision Record
Issue Date Remarks
AJul 2020 First Issue
BNov 2021 Updated Kit Contents

iv

Non-Scale 2-Bag Bagwell Upgrade
This publication provides procedures for upgrading an NCRFastLane SelfServ™
Checkout (7358), either a from No-Bag unit or a unit with an existing Bagwell, to a unit
with a Non-Scale 2-Bag Bagwell.
The NCRFastLane SelfServ™ Checkout with a Bagging Area (Bagwell) Module or
Large Basket (Large Basket) Module can be configured for either Left-hand (LH)
orientation or Right-hand (RH) orientation, which refers to the direction customers scan
and bag items.
•Left-hand (LH) orientation—Customers scan from left to right.
•Right-hand (RH) orientation—Customers scan from right to left.
Note: The orientation of the unit is determined by the position of the Lower Core
(Cabinet) Module in relation to the Bagwell or Large Basket.
Example: The Left-hand (LH) unit has the Cabinet positioned on the left side of the
Bagwell or Large Basket.

2 Non-Scale 2-Bag Bagwell Upgrade
Kit Contents
Depending on the color variant of the Non-Scale Bagwell, refer to the following sections
for information about kit contents:
•7358-K122 Non-Scale 2-Bag Bagwell Upgrade (Walmart Medium Gray) on the facing
page.
•7358-K145 Non-Scale 2-Bag Bagwell Upgrade (Walmart Light Blue) on page6.
Note: The 7358-K122 and 7358-K145 Kits include Core skirt panels that customers may
use to replace their existing Core skirt panels.

Non-Scale 2-Bag Bagwell Upgrade 3
7358-K122 Non-Scale 2-Bag Bagwell Upgrade (Walmart Medium
Gray)

4 Non-Scale 2-Bag Bagwell Upgrade
Part Number Description
497-0527862 7358-K122 Kit, 2-Bag Bagwell Module, Non-Scale with
Lower Bagwell Bumpers (Walmart Medium Gray)
795-0283628 Assembly - 2 and 3-Bag Door (Walmart Medium Gray)
795-0134228 Panel - 2-Bag Backsplash (Walmart Medium Gray)
795-0134128 Panel - 2-Bag Front (Walmart Medium Gray)
795-0133328 Panel - 1/2/3 Bagwell Side (Walmart Medium Gray)
* 795-0281628 Hole Cover Label - (Light Royal Gray)
006-8604541 Screw, ¼–20 x ½, Pan Head, Phillips (4 pcs)
497-0528668 Assembly - 2-Bag Frame with Leveling Feet and Casters
497-0526950 Skirt - 2-Bag BOM Package
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (5 pcs)
006-8611505 Bushing, Nylon (2 pcs)
497-0455519 Plastic Deflector - Core Side
497-0455521 Plastic Deflector - Bagwell Backsplash - 2-Bag
009-0005930 Cable Tie-Snap In Mounting (3 pcs)
006-8612446 Screw - 8-32 x 0.375 in Phil Pan, Self Tapping - Type F (14
pcs)
006-8616060 Screw - ¼–20 x 0.75 in, Pan Head, Phillips, Zinc Plated
Steel (8 pcs)
006-8623998 Screw - ¼–20 x 1-21/64 in, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4 pcs)
497-0421485 Power Strip, IEC 4-POS, Plastic Case
497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
007-9714414 Tie Strap Plain 5.60 LG (2 pcs)
* 497-0513382 Label - Multiple Power Sources/ Disconnect Power
Caution
497-0521432 Bracket - Top - Spacer (4 pcs)
497-0518277 Bumper - 1, 2, 3-Bag Side, Wrap Around Corner

Non-Scale 2-Bag Bagwell Upgrade 5
Part Number Description
006-8612492 Screw - ¼–20 x 0.750 in, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (5 pcs)
497-0457054 Black Nylon Spacer 15 mm OD x 10.4 mm ID x 10 mm L
(5 pcs)
497-0518274 Bumper - 1 Bag Rear, 2/3 Bag Door
* 497-0423108 Instructions-Kit (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

6 Non-Scale 2-Bag Bagwell Upgrade
7358-K145 Non-Scale 2-Bag Bagwell Upgrade (Walmart Light Blue)

Non-Scale 2-Bag Bagwell Upgrade 7
Part Number Description
497-0528439 7358-K145 Kit, 2-Bag Bagwell Module, Non-Scale with Lower
Bagwell Bumpers (Walmart Light Blue)
795-0283612 Assembly - 2 and 3-Bag Door (Walmart Light Blue)
795-0134212 Panel - 2-Bag Backsplash (Walmart Light Blue)
795-0134112 Panel – 2-Bag Front (Walmart Light Blue)
795-0133312 Panel - 1/2/3 Bagwell Side (Walmart Light Blue)
795-0281612 Hole Cover Label - (Walmart Light Blue)
006-8604541 Screw, ¼–20 x ½, Pan Head, Phillips (4 pcs)
497-0525620 Assembly - 2-Bag Frame with Leveling Feet And Casters
497-0526950 Skirt - 2-Bag BOM Package
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (5 pcs)
006-8611505 Bushing, Nylon (2 pcs)
497-0455519 Plastic Deflector - Core Side
497-0455521 Plastic Deflector - Bagwell Backsplash - 2-Bag
009-0005930 Cable Tie - Snap In Mounting (3 pcs)
006-8612446 Screw - 8-32 x 0.375 in Phil Pan, Self Tapping - Type F (14 pcs)
006-8616060 Screw - ¼–20 x 0.75 in, Pan Head, Phillips, Zinc Plated Steel
(8 pcs)
006-8623998 Screw - ¼–20 x 1-21/64 in, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4 pcs)
497-0421485 Power Strip, IEC 4-POS, Plastic Case
497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
007-9714414 Tie Strap Plain 5.60 Lg (2 pcs)
497-0513382 Label - Multiple Power Sources/ Disconnect Power Caution
497-0521432 Bracket - Top - Spacer (4 pcs)
497-0457054 Black Nylon Spacer 15 mm OD x 10.4 mm ID x 10 mm L (5
pcs)
497-0518277 Bumper - 1, 2, 3-Bag Side, Wrap Around Corner
497-0518274 Bumper - 3-Bag Rear, 2/3 Bag Door

8 Non-Scale 2-Bag Bagwell Upgrade
Part Number Description
006-8612492 Screw - ¼–20 x 0.750 in, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc- Plated Steel (5 pcs)
* 497-0423108 Instructions Kit (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

Non-Scale 2-Bag Bagwell Upgrade 9
Installation Procedures
Installing the Bagwell upgrade involves the following procedures:
•Installing Core Skirt Panels on the next page.
Note: This procedure may be optional.
•Removing Existing Non-Scale Bagwell on page12.
•Changing Bagwell Orientation on page18.
Note: This procedure may be optional.
•Installing New Non-Scale Bagwell on page22.
•Installing Bagwell Skirt Panels on page28.
•Routing Cables on page30.

10 Non-Scale 2-Bag Bagwell Upgrade
Installing Core Skirt Panels
To install the Core skirt panels, follow these steps:
Note: The 7358-K122 and 7358-K145 Kits include Core skirt panels that customers may
use to replace their existing Core skirt panels.
1. On the front or back of the core, do the following:
Note: The front and back skirt panels of the core must be installed before the side
skirt panels of the core.
a. Attach the skirt panel to the skirt bracket by aligning the open slots in the skirt
panel with the screw holes in the skirt bracket.
b. Secure the skirt panel to the bracket using two screws.
c. Adjust the skirt panel so that it is flush with the floor.
d. Tighten the screws to secure the skirt in place.

Non-Scale 2-Bag Bagwell Upgrade 11
2. On either sides of the core frame, do the following:
Note: The side skirt panels of the core the must be installed after the front and back
skirt panels of the core.
a. Attach the skirt panel to the skirt bracket by aligning the open slots in the skirt
panel with the screw holes in the skirt bracket.
b. Secure the skirt panel to the bracket using 5 screws.
c. Adjust the skirt panel so that it is flush with the floor.
d. Tighten the screws to secure the skirt in place.

12 Non-Scale 2-Bag Bagwell Upgrade
Removing Existing Non-Scale Bagwell
To remove an existing Non-Scale 2-Bag Bagwell, follow these steps:
Note: To remove a Non-Scale 1-Bag Bagwell, refer to 7358-K121/K125 Non-Scale 1-Bag
Bagwell Upgrade. To remove a Non-Scale 3-Bag Bagwell, refer to 7358-K165 Non-Scale 3-
Bag Bagwell Upgrade.
1. Detach the Scale Tray from the Bagwell by removing four (4) flat head screws.
Note: Remove bag racks if present.

Non-Scale 2-Bag Bagwell Upgrade 13
2. Remove the clear plastic deflectors from the Backsplash and side of the Core.
Note: Leave the Core side deflector in its place if the new Bagwell is attached on the
same side.

14 Non-Scale 2-Bag Bagwell Upgrade
3. Disconnect the following cables:
• Local Area Network (LAN) Cable from the Customer Interface
• ACPower Out Cables from the Power Strip
• AC Power In Cable from the Power Strip
Note: Remove cables from any routing clips or tie wraps if needed.
4. Route the following cables through the cable access hole:
Bagwell Cable Access Hole
• AC Power In Cable
Core Cable Access Hole
• Local Area Network (LAN) Cable
• AC Power Out Cables
Note: The Local Area Network (LAN) Cable and ACPower In Cable may be routed
differently depending on the installation conditions.

Non-Scale 2-Bag Bagwell Upgrade 15
5. Remove the upper rear screw attaching the Backsplash to the Core.

16 Non-Scale 2-Bag Bagwell Upgrade
6. Remove the Bagwell by doing the following:
a. Remove the two (2) bottom screws attaching the Bagwell to the Core. Screws are
located on either side of power strip.
b. Loosen the two (2) upper screws, but do not remove.