Neilsen CT1533 User manual

AIR HOSE REEL CT1533
ORIGINAL INSTRUCTIONS
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

2
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety
and health requirements of the EC Directive based on its design and type, as
brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration
will lose its validity.
Product description: AIR HOSE REEL
Model: CT1533
Applicable EC Directives:
EC Machinery Directive 2006/42/EC
Harmonized standards
EN ISO 12100
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2019-05-20

3
Safety precautions
1. Make sure incoming pressure dose not exceed the rated pressure.
2. Use the proper eye protection when assembling and using the hose reel.
3. Assemble the hose reel on a clean workbench free of debris and moisture.
4. Use Soap liquid when checking for air leakage.
5. Keep children away from the work area.
Warning: Exposure of skin directly to pressurize air or fluids could result in
severe bodily injury.
Installation and Assembly
Note: You will need to purchase appropriate hardware part for mounting your
new reel.
You will also need to supply hose for the reel, refer to specification to
determine the correct hose length refer to appendix for assembly.
1. Apply teflon tape or pipe sealant to hose reel fitting threads. Attach this
hose to the inside and axle and tighten.
2. Put the lead hose onto the swivel, then screw down the lead hose fitting
onto the swivel to tighten the lead hose. Feed the long hose through the drum
opening, then wrap the hose on the drum.
3. Feed the long hose through the drum opening, then wrap the hose on the
drum. Hose length should be 100 feet or less.
Attention points for hose use
1. After using, please turn off the air compressor.
2. Do not have the reel outside during very low temperature which may cause
the hose less flexible and become difficult to handle.

4
1. Hose clip
2. Left connection part
3. Frame
4. Support plate
5. Right connection part
6. Inlet hose connection
7. Left drum wheel
8. Rotation plate
9. Left spacer bush
10. Drum connection
11. Outlet hose connection
12. Drum connection
13. Hose clap
14. Right spacer bush
15. Rotation plate
16. Right drum wheel
17. Crank shaft
18. Hand arm
19. Crank handle
Care and maintenance
1. Clean the air hose reel using a lightly moistened cloth.
2. Never immerse the air hose reel in water for cleaning.
3. If the hose is dirty, wipe it clean before rewinding it onto the reel.
Technical Specification
MODEL
HOSE
LENGTH
TYPE OF
HOSE
WORKING
PRESSURE
WEIGHT
HOSE
DIAMETER
CT1533
100FEET
PVC
8 BAR
7.0KGS 8X12MM

5
CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
Made in China