Neilsen CT0729 Operation instructions

HYDRAULIC BODY REPAIR KIT - 10 TON
CT0729
ORIGINAL INSTRUCTION
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.

2
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety
and health requirements of the EC Directive based on its design and type, as
brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration
will lose its validity.
Product description: HYDRAULIC BODY REPAIR KIT - 10 TON
Model: CT0729
Applicable EC Directives:
EC Machinery Directive 2006/42/EC
Harmonized standards
EN 1494:2000 +A1:2008, EN ISO 12100：2010
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2016-04-11

3
OPERATION INSTRUCTION
When you want use this jack,turn the control knob of the valve clovkwise, pull and
push the handle, for easy to use you can put it in any position from horizontal to
vertical, but the tube must face downwards,if necessary, the components can be
combined with the body. When you want release the jack, turn the control knob of
the valve counter clockwise.
IMPORTANT SAFETY RULES
1. Never exceed the maximum load capacity of the ram.
2. Do not over extend the ram, as it is possible to force the plunger out
of the top of the ram.
3. When coupler valves are disconnected always insert dust cap to
keep the oil lines clean.
4. If the load is not centred to the ram plunger, pump carefully. If you
have to use excessive pressure to pump the ram, stop the operation
and adjust the set-up so that the load is more central. This should
decrease the effort required.
5. Do not drop any heavy objects onto the hose, and do not allow the
hose to kink.
6. Always allow clearance for the hose to avoid damage to the hose
and couplers.
7. Keep the equipment away from heat or fire, as this may damage or
weaken the equipment.
MAINTENANCE
FOR LOAD:
1.Maximun load can not exceed the rated capacity.
2.The load on the spreader ram can not exceed 1/2-ton.
3.The load can not exceed the half of the capacity when all tubes used.
4.The extension of the piston can not exceed thr stroke.
FOR SAFETY:
1.Working oil:No 10.
2.Check the level of oil,if it is not sufficient,please add the same hydraulic oil.
3.After using,close the valve with the cover,to keep the oil free the dust and dirt.
4.Before lifting,adjust the jack siowly to make the load coaxial with resnect to the
jack.
5.Tube can not be bent, near to the catting tools and fires, also can not put te
weight on it.

4
SPECIFICATIONS
Capacity 10ton
Max lifting height 135mm
Cylindrt min height 355mm
PARTS LIST
Part No
Description
Part No
Description
1
Metal Box
34
Pin
2
Tube
35
Handle Socket
3
Base
36
Handle
4
Spreader Ram Toe
37
Handle Sleeve
5
Plate Head
38
Cylinder
6
Wedge Head
39
Screw Cover
7
Spure Head
40
Bushing
8
Movable Connection
41
Screw
9
Serrated Saddle
42
Nuts
10
Rubber Head
43
Pull Spring
11
Screw
44
Retaining Ring
12
O-Ring
45
Ring
13
Screw
46
Nylon Sealing
14
Resevoir
47
Y-Seal
15
Steel Ball
48
Retaining Ring
16
Spring
49
Piston Rod
17
O-Ring
50
Head Protect
18
Oil Retetun Valve
51
Ring For Ram
19
O-Ring
52
Screw Cover
20
Screw
53
O-Ring
21
Hydraulic Hose
54
Valve Block
22
Coupler
55
Connecting Nuts
23
Dust proof Cover
56
Screw
24
Connect Tube
57
Fixed Jaw
25
Nylon Sealing Ring
58
Ram
26
Handless Socket Base
59
Seal Ring
27
Copper Washer
60
Ring
28
Pump Reservoir
61
Cover
29
Dust proof Ring
62
Movable Jaw
30
O-Ring
63
Pin
31
Nylon Sealing
64
Snap Ring
32
Piston
65
Snap
33
Retaining Ring

5

6
HYDRAULIC BODY/FRAME PUMP

7
HYDRAULIC RAM
HYDRAULIC SPREADER

8
CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
Made in China