Neilsen CT4188 User manual

600LB TRAILER DOLLY CT4188
INSTRUCTIONS
Read this material before using this product.Failure to do so can result in serious injury.
SAVE THIS MANUAL.
IMPORTANT SAFETY INFORMATION
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard level surface.
4. Avoid working on slopes as the force of gravity is difficult to judge.
5. Before moving a trailer, assure that the load is centered and coupler secured.
6. No alterations shall be made to this product.
7. Wear ANSI-approved safety goggles and heavy-duty work gloves during
Specifications
Capacity
600LBS
Hitch ball
50mm

assembly and use.
8. Keep clear of trailer’s path while placing on and removing from dolly, and while
moving.
9. Use as intended only. Do not use for aircraft purposes.
10. Inspect before every use; do not use if parts loose or damaged.
11. Be aware of dynamic loading! Sudden load movement may briefly create
excess load causing product failure.
12. Read trailer owner’s manual and instruction manual for Tongue Jack (not
included) before use.
13. A Jack stand or trailer jack should be used to store your trailer for long
periods of time.
14. This dolly and trailer jack connected to it must be properly blocked any time
they come to a resting position.
15. Do not work under Trailer while on Dolly.
16. Keep area free of spectators and do not allow anyone on trailer while on Dolly.
17. Use wheel chocks when raising front of trailer for placement onto Dolly.
18. Assemble only according to instructions. Improper assembly can create
hazards.
19. Keep assembly area clean and well lit.
20. Weight capacity and other product capabilities apply to properly and
completely assembled product only.
21. Do not assemble when tired or when under the influence of alcohol, drugs or
medication.
22. This product is not a toy. Do not allow children to play with or near this item.
23. Keep your trailer dolly clean.Thoroughly inspect it before each use.
Periodically lubricate all moving parts.
INSTRUCTIONS
Using two Bolts(13) + Washer(15)
and Nut (14). Secure Handle Mount
(3) to Axle Assy (1).Do not tighten
bolts fully.
Using a Bolt (13)+Washer (15)and
Nut(14). Secure Brace(4)to Axle
Assy(1).Do not tighten filly.

Use two Bolts (11)+Washer (15) +
Nut (14) to secure Brace (4) +Handle
Mount (3) +T-Bar Handle (2) + Stand
(5) all-together.
T-Bar Handle (2 )using two Bolts (12)
+ Washer (15) + Nut(14).
Install Tyres (7) on to Axle Assy
(1).Insert Washer (9) and a Pin (10).
Firmly tighten all bolts using a 19mm
Socket and adjustable wrench.
OPERATION
1. Check Dolly tire inflation and correct as needed. Inflation pressure is marked
on tires.
2. Chock trailer wheels to keep them from rolling. Chocks sold separately.
3. Use a Tongue Jack (sold separately) to raise the Trailer’s tongue.
4. Place Dolly in position under raised coupler. Lower coupler slowly onto Dolly
and secure it to Dolly.
5. Use Handle to guide vehicle to location.

PARTS LIST
CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
Made in China
No
Description
Qty
1
Axle assembly
1
2
T-bar handle
1
3
Handle mount
1
4
Brace
1
5
Stand
1
6
Trailer ball
1
7
Tyre assembly
2
8
Rubber grip
2
9
Larger washer
2
10
Pin
2
11
M12 x 50 Bolt
2
12
M12 x 40 Bolt
2
13
M12 x 30 Bolt
2
14
M12 washer
7
15
M12 lock nut
7