NetComm FIBRE NF1ADV User manual

NF1Adv VOIP Setup Guide
(for Dodo)

Configuring your NF1Adv for VOIP Service
The following steps will take you through the process of setting up your VOIP connection.
Step 1: Checking Computer Network Settings:
You will need to connect your computer directly to your VOIP device (modem, or ATA) and set
the network connection on your computer to obtain an IP address automatically. Please follow
the instructions appropriate for your operating system below:
Below are the instructions for setting Windows XP to obtain an IP address automatically for
your ethernet connection:
1. Click on the Start Menu, and go to “Control Panel”.
2. Click on “Network Connections”.
(If you only see "Network and Internet Connections", open that first, and then click on
"Network Connections")
3. Right click on “Local Area Connection” and select “Properties”.
4. Double-click on “Internet Protocol”.
5. Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
6. Click “OK”, and then click “OK”(or “Close”).
Below are the instructions for setting Windows Vista to obtain an IP address automatically for
your ethernet connection:
1. Click on the Start Menu, and go to “Control Panel”.
2. Click on “Network and Sharing Centre”.
(If you only see "Network and Internet", open that first, and then click on "Network and
Sharing Centre")
3. Click on “Manage network connections”(on the left-hand side of the window).
4. Right click on “Local Area Connection” and select “Properties”.
5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
6. Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
7. Click “OK”, and then click “OK” again.

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your
ethernet connection:
1. Click on the Start Menu, and go to “Control Panel”.
2. Click on “Network and Sharing Centre”.
(If you only see "Network and Internet", open that first, and then click on "Network and
Sharing Centre")
3. Click on “Change adapter settings” (on the left-hand side of the window).
4. Right click on “Local Area Connection” and select “Properties”.
5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
6. Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
7. Click “OK”, and then click “OK” again.
Below are the instructions for setting Mac OS X to obtain an IP address automatically for your
ethernet connection:
1. Click on the Apple Menu, and go to "System Preferences".
2. Click on "Network".
3. Click on “Ethernet” or "Built-in Ethernet".
4. Click on the "Configure" drop-down box, and select "Using DHCP" then click
"Apply".

Step 2: Configuring your VOIP settings:
Troubleshooting Tip
One sided VOIP calls may be an indication of a missing or misconfigured port forwarding rule.
1. Navigate to http://192.168.1.1 in a web browser, using “admin” as both the username
and password.
2. Select the VOICE menu then click the Basic Settings option.

3. Enter the following details as given to you by your VoIP Service Provider.
VoIP phone number as given by Dodo, or as
Dodo directs you
Dodo VoIP account password
Enable SIP Proxy, Outbound Proxy and
Registrar
Use voip.dodo.com.au and port 5060 or as
directed by Dodo on all three details
Use pppoe if you’re using the NF1Adv as a modem/router;
use WAN if you’re using it just as a router

SIP Configuration
Locale Selection
Choose your country from the dropdown list
SIP domain name
Keep blank or as directed by Dodo
Use SIP Proxy
Ensure that this is ticked
SIP Proxy
voip.dodo.com.au or as directed by Dodo
SIP Proxy Port
5060 or as directed by Dodo
Use SIP Outbound Proxy
Ensure that this is ticked
SIP Outbound Proxy
voip.dodo.com.au or as directed by Dodo
SIP Outbound Proxy Port
5060 or as directed by Dodo
Use SIP Registrar
Ensure that this is ticked
SIP Registrar
voip.dodo.com.au or as directed by Dodo
SIP Registrar Port
5060 or as directed by Dodo
Account Enabled
Ensure that this is ticked
VoIP Phone Number
VoIP Account Phone Number as provided by Dodo
Display Name
VoIP Account Phone Number as provided by Dodo
Auth. ID
VoIP Account Phone Number as provided by Dodo
Auth. Password
VoIP Account Password as provided by Dodo
4. After entering all required fields click on the Apply button.
5. Select Basic then click on Home to check the VoIP connection registration status.

6. The VoIP connection registration status should all change to Up if all the settings entered
are correct and you have a current connection to the internet.
7. Check for a dial tone on your phone handset. The VoIP account should now be active and
you should now be able to make and/or receive VoIP phone calls (depending on the type
of VoIP account you are using).