NetComm 3G10WVT User manual



Information
¾ProductCode:3G10WVTTelstraTURBO™GATEWAY
¾GatewayFirmwareVersion:3G10WVT‐L101‐S306TMB‐T01_R11
¾ModuleFirmwareVersion(PPPMode):K2_0_7_18BT/K2_0_7_19AP
¾HardwareVersion：96358G‐133Vor96358G‐133VB
¾UpdateToolFilename:
3G10WVT_FWUpdateTool_T01_R11.zip
¾Date:February3,2010


Updates(baseonFW:T01_R07)
ThemainpurposeofthelastreleaseT01_R11FWreleaseisfixingthe3Gdrop‐outissueobservedat
somelocations.ThenewFWcombination(gatewayFWandmoduleFWsK2.0.7.18/K2.0.7.19)inthe
one‐clicktoolweretestedandprovedtofixtheissue.

 
Fixes:
1. Fixthe3Gdrop‐outthathappenswhenthereislittledatatrafficgothrough.Thisissue
happensusuallyatnightinCBDareas.

2. Providebusytonewhengatewaydetectsnonetworkinsteadofdialtone.

3. ImprovetheWPA/WPA2authenticationmechanismtopreventtheRadiusserverfrom
rejectingauthentication.

Change:

1,USBStoragedefaultsettingchangeto
NetBiosname:3G10WVT
Directoryname：USB‐Storage
Newfeatures:
1. Thecircuit‐switchedtelephoneinterfaceallowsmanualactivationofsupplementaryservices.
Theinstructionsonhowtousethosesupplementarycodesarelistedasappendix.

2. AddanoptionontheNextGSettingpagetoallowuserdeletesthepre‐setAPNs
permanentlyfromthewebGUI.Networkadministratorcanapplythisfeaturetorestrictthe
3G10WVTtoprovidecircuitswitchcallonly(nodataservice)orusersinglespecificAPN.








1




Appendix:SupplementaryServices
Call Forward Busy function
1.Call forward busy on, press "*24*" or “*67*” and key in forward phone number(phone B) , then
press "#”. If succeed, user will hear “dododo”;
2.Call forward busy off, Press "#24#" or #67#”. If succeed, user will hear “dododo”;
3.Call forward busy Status, press "*#24#" or *#67#”. ON: continuous low-pitched tone；
OFF: continuous high-pitched tone.
Call Forward unconditional Function
1.Call forward unconditional on, press "*21*" and key in forward phone number(phone B) , then
press "#". If succeed, user will hear “dododo”;
2. Call forward unconditional off. Press "#21#". If succeed, user will hear “dododo”;
3. Call forward unconditional Status. Press "*#21#". ON: continuous low-pitched tone；
OFF: continuous high-pitched tone.
Call Forward no reply Function
1.Call forward no reply on: press "*61*" and key in forward phone number(phone B) , then press "#".
If succeed, user will hear “dododo”;
2.Call forward no reply off: Press "#61#". If succeed, user will hear “dododo”;
3.Call forward no reply Status: press "*#61#". ON: continuous low-pitched tone.
OFF: continuous high-pitched tone.
Note. The no reply period before call forwarding ton nominated number is 20sec.
Call Forward unreachable Function
1.Call forward unreachable on: press "*62*" and key in forward phone number(phone B) , then
press "#". If succeed, user will hear “dododo”;
2. Call forward unreachable off, Press "#62#"
2




3. Call forward unreachable Status. Press "*#62#". ON: continuous low-pitched tone.
OFF: continuous high-pitched tone.
4. Power off 3G10WVT and use phone A call to 3G10WVT's phone. The phone call will be forwarded
to the nominated phone number (phone B).
Calling number restriction Function (3G10WVT as caller)
1. Calling number restriction block, press "#31#" + callee number to hide caller’s number
2. Calling number restriction present, Press "*31#" +Callee number to show caller’s number.
Call waiting function
1. Call waiting on: press "*43#". If succeed, user will hear “dododo”;
2. Call waiting off: press "#43#". If succeed, user will hear “dododo”
3. Call waiting status, press " *#43#". Call waiting on: continuous low-pitched tone；
Call waiting off: continuous high-pitched tone
4. Call waiting Hold & Switch calls.
(1) 3G10WVT phone calls to phone A.
(2)Then phone B calls to 3G10WVT, 3G10WVT phone will hear “bi-bi” tone, then press “Recall
Button”/Flash/Flash and "2" to pick phone B, hold phone A.
(3)Press “Recall Button”/Flash and "2" again to switch between phone A & phone B.
5. Call waiting Hang up & Switch calls.
(1) 3G10WVT phone calls to phone A.
(2)Then phone B calls to 3G10WVT, 3G10WVT phone will hear “bi-bi” tone, then press “Recall
Button”/Flash/Flash and "1" to hang up with phone A, connect phone B.
6. Call waiting Hang up waiting call.
(1) 3G10WVT phone calls to phone A.
3




(2)Then phone B calls to 3G10WVT, 3G10WVT phone will hear “bi-bi” tone, then press “Recall
Button”/Flash/Flash and "0" to hang up phone B, keep connection to phone A.
3-way conferencing function
1. 3G10WVT call to phone A, and press “Recall” or “Flash” +"2".
2. Then 3G10WVT call to phone B, and press “Recall” or “Flash” and "3" to start 3-way chat.
3. Three-way conferencing hold & Switch calls: press “Recall” or “Flash”, after hearing dial tone,
press "2".
4. Three-way conferencing Hang up & Switch calls, press “Recall” or “Flash”, after hearing dial tone,
press "1".


4
