NetComm FIBRE NF1ADV User manual

NETCOMM FIBRE™ SERIES
WiFi Data and VoIP Gateway
NF1ADV - Quick Start Guide

1. If you are using ADSL, connect the supplied RJ-11 cable to the DSL port on
the back of your device and to the phone port that supplies your ADSL service.
2. If you are using Fibre, connect your RJ-45 Ethernet cable from the WAN
Ethernet port to your NBN supplied termination device (ONT).
3. Connect the supplied RJ-45 Ethernet cable from one of the Ethernet Ports
on the back of the device to your computer.
4. Connect the power adapter and press the on/off button
OPTIONAL
5. Connect an RJ-11 cable from the telephone port on the back of your device to
a telephone handset to enable VOIP service usage.
Connecting the cables
1

Login to the Web Interface
2
1. Open a web browser (Interet Explorer, Firefox and safari), type 192.168.1.1 into
the address bar and press Enter.
2. At the login screen, type admin (without the quotes) into both the Username
and the Password elds and click OK.
3. Click on the Basic menu at the top of the page and then click on Quick Setup.
4. Select the appropriate connection type and click Next.

5. If you are connection with ADSL, select PPPoE. If you are connecting with
Fibre, select IP over Ethernet. Click Next to continue.
Please note: For more information about the other connection types available, please refer to the NF1ADV User Guide
available on our website.

Please note: This step is for ADSL users only who have selected PPoE. For all Fibre uses who selected IP over Ethernet,
please skip to the next step.
1. Enter the User ID and Password supplied by your Internet Service Provider.
2. Click on Next.
Connecting with ADSL
3

1. The default settings that appear on the Wireless Quick Setup page are
shown above.
2. You can select to enable or disable the Wireless function by clicking the
Enable Wireless checkbox.
3. You can change your SSID. Your SSID is the name your Wireless Network will
be identied by. If you change it, please remember to note as you will need this
to connect to the router wirelessly.
4. You can also select the Wireless security to use and change the Wireless
Network key.
Please note: By default, the router has a random SSID and Wireless Network key. This key is printed on the included Wireless
Security Card.
Wireless Quick Setup
4

VoIP Quick Setup
5
1. Select the appropriate SIP Provider for your VOIP service from the pull down
menu or alternatively, select Custom, and enter the VOIP service details as
supplied by your VOIP provider.
2. Click Next
OPTIONAL
3. If you do not wish to congure your VOIP service settings now, click Skip.

1. Select whether you have a single or multiple SIP accounts and click Next.
Please note: When using multiple SIP accounts, select the number of telephone and/or DECT devices enabled for use with
these accounts. You can then click “Next” and enter the applicable VOIP service details for each specic handset.
2. Enter the VoIP Phone Number, DisplayName, Auth ID and Auth Password as
supplied by your VOIP service provider and click Next.

DECT Handset Registration
6
DECT handsets can be registered to the router to enable them to utilise the
congured VoIP service. To do this, click Start Registration and then set your
DECT handset to register with a base station. If you are prompted for an Access
Code, enter the code shown on this page.
Once registered, the handset information should appear in the Handset
Information section.
When you have nished adding DECT handsets, click Next.

USB Storage
7
If a USB device is plugged into the USB port, it will be auto detected and you will
have the option to enable USB storage.
If you enable USB storage you will be shown the Netbios and Directory name elds.
These names can be anything you want.
Once you have congured the settings as needed, click Next.
To access the storage device, open a web browser and type
\\Netbios Name\Directory\
For example (using the defaults) the address to access the storage device would be
\\NF1ADV\USB-Storage\