NetComm AM5066 User manual

Rave III USB Modem
AM5066 – V.92 Data/Fax Modem
Now with V.92 and auto fallback for full compatibility
Bus Powered – no external power supply needed
USB hot swappable Plug & Play for easy installation
Automatic detection between data and fax calls
Auto Dial and Auto Answer
Auto Speed/Mode Selection
USBPlug & PlayV.92
NetComm’s Rave III USB Modem lets you jump online at full speed.
And because it’s USB, just Plug & Play and you’re away. The Rave III delivers full V.92* 56K speed which gives you up
to a blistering 230,000 bps throughput.
NetComm’s Rave III Modem lets you whizz through your downloads so you can hear those MP3s sooner, play games
and enjoy shopping, banking or just surfing the Net. The Rave III is also equipped with TAM (Telephone Answering
Machine) support.
To complete your small business office, the Rave III can send and receive faxes directly from your PC with the
minimum of fuss.
* Your Internet Service Provider must support the V.92 standard. If a V.92 connection is not available, this modem automatically reverts to the 56K V.90 mode.

NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: [email protected] W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Your NetComm dealer:
Rave III USB Modem
AM5066 – V.92 Data/Fax Modem
Now with V.92 and auto fallback
for full compatibility
Bus Powered – no external power
supply needed
USB hot swappable Plug & Play for
easy installation
Automatic detection between data
and fax calls
Auto Dial and Auto Answer
Auto Speed/Mode Selection
KEY FEATURES
TECHNICAL SPECIFICATIONS
USB INTERFACE
•Complies with USB 1.1 specification at 12Mbs full speed
•Hot Plug & Play support for easy installation
DATA MODE
•Data Mode: data throughput up to 230Kbps
•V.92, V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21,
Bell 212A and 103.
•Error correction: MNP 2-4 and V.42, LPAM
•Data compression: MNP 5 and V.42bis
FAX MODE
•ITU-T V.17, V29, V.27ter and V.21 channel 2
•TIA/EIA 578 Class 1 fax send and receive speeds 14,400,
12,000, 9600, 7200, 4800 and 2400 bps
SYSTEM REQUIREMENTS
• PC with 1GHz Processor with 256Mbytes system
memory or better.
•USB port
•Windows 98se, ME, 2000 or XP
•50Mbytes of free disk space for driver installation
•CD-ROM Drive
PACKAGE CONTENTS
• NetComm Rave III USB V.92 modem
•Telephone cable
•USB cable
•Installation documentation
•NetComm CD-Rom
THREE YEAR WARRANTY*
One year warranty out of the box. Extra two years free
with online registration at www.netcomm.com.au
*Conditional upon online registration
Line Port
USB Port
Internet
Telephone
Wall Socket
Computer with
USB Port
AM5066 Rave III USB Modem
RJ-11 Cable USB Cable