NETGEAR Orbi Pro Satellite User manual

Set Up the Orbi Pro Router and Satellites
You can wall-mount or ceiling-mount the Orbi Pro router and satellites. For more information
about mounting, see the other side of this document. To set up your router and satellites, you
can use the NETGEAR Orbi app or a web browser.
NETGEAR Orbi App Setup
1. Scan a QR code or search for NETGEAR Orbi in the Apple App Store or Google Play Store.
2. Download and launch the NETGEAR Orbi app on your mobile device and follow the prompts.
Quick Start Guide
Blue
The connection between the Orbi Pro router and Orbi Pro satellite is good.
Amber
The connection between the Orbi Pro router and Orbi Pro satellite is fair. Consider moving
the Orbi Pro satellite closer to the Orbi Pro router.
Magenta
The Orbi Pro satellite was unable to connect to the Orbi Pro router. Move the Orbi Pro
satellite closer to the Orbi Pro router.
Note: If the ring LED still lights magenta aer about one minute, press the Sync button
on the back of the Orbi Pro router and on the back of the Orbi Pro satellite. When the
Orbi Pro satellite syncs with the Orbi Pro router, the satellite’s ring LED lights white, then
lights blue to indicate a good connection, and then turns o.
The Orbi Pro satellite’s ring LED lights white while the satellite attempts to sync with the Orbi
Pro router. Aer the Orbi Pro satellite’s ring LED lights white, it lights one of the following colors
for about three minutes and then turns o:
Web Browser Setup
1. Unplug your modem, remove and reinsert the backup battery if it uses one, and plug the
modem back in.
2. Use an Ethernet cable to connect your modem to the yellow Internet port on your Orbi Pro
router.
Note: If you want to connect your Orbi Pro router to an existing gateway, we recommend
that you turn o your existing gateway’s WiFi.
3. Connect your Orbi Pro router to a power source.
The Power LED on the back of the Orbi Pro router lights green. If the Power LED does not
light, press the Power On/O button.
4. Wait for the Orbi Pro router’s ring LED to light white.
5. Place your Orbi Pro satellite, plug it in, and wait for the satellite’s ring LED to light blue.
If the satellite’s ring LED lights amber or magenta, move the satellite closer to the router.
For more information, see Orbi Pro Satellite Ring LED Sync Colors.
6. Repeat these steps to connect the second Orbi Pro satellite.
7. Connect your computer or mobile device to the Orbi Pro router or satellite with an Ethernet
or WiFi connection:
• Ethernet. Use an Ethernet cable to connect your computer to the Orbi Pro router or
satellite.
• WiFi. Use the preassigned WiFi network name (SSID) and password on the label of the
Orbi Pro router or satellite to connect to the Orbi WiFi network.
8. Launch a web browser and visit orbilogin.com.
9. If a login window opens, enter the user name and password.
The user name is admin and the default password is password.
10. Follow the onscreen instructions.
The Orbi Pro router’s ring LED turns o aer the setup is complete.
Orbi Pro Satellite Ring LED Sync Colors
PRO

Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to
register your product, get help, access the latest downloads and user manuals, and join our
community. We recommend that you use only ocial NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à
http://downloadcenter.netgear.com/other/.
(If this product is sold in Canada, you can access this document in Canadian French at
http://downloadcenter.netgear.com/other/.)
For the current EU Declaration of Conformity, visit http://kb.netgear.com/11621.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.
December 2017
Ring LED (not shown in image)
Sync button (also used for WPS connection)
Internet port (the Orbi Pro satellite does
not include an Internet port)
Ethernet ports
Orbi Pro Router Overview
2
1
3
4
1
2
34
5
6
7
Orbi Pro Satellite Overview
2
1
6
4
5
7
Power On/O button and Power LED
DC Power connector
Reset button
5
6
7
Attach the Mounting Base
Orbi Pro Router
(Model SRR60) Orbi Pro Satellite (2)
(Model SRS60)
Ethernet cable
Power adapters (2)
(vary by region)
Package Contents
Rubber feet
(2 sets)
Ceiling-Mounting
Wall brackets (2)
1
2
1
1
2
3
4
Ceiling bracket (2)
T-bracket with
screws (2)
T-bracket screws
(2 sets)
Wall anchors with screws (2 sets)
Mount bases (2)
Mount covers (2)
Loosen the screw so that the locking
plate can slide. Tighten when secure to
the T-bar.
2
Wall-Mounting
Attach the mounting base and the
mount cover for wall-mounting or
ceilling-mounting.
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Mount base
screws (2 sets)