NEUTRIK FIBERFOX NO4M4DW-FX User manual

HANDLING INSTRUCTION
FIBERFOX Fiber Chassis Connector
|
2 & 4-channel
R
Page 1BDA 626
CAUTION:
Laser radiation CLASS 1. Do not look directly into beam of light!
A Chassis Connector Cleaning / Inspection
Tools: Ÿ Distilled water
Ÿ Dust remover (Air in a can)
Ÿ STICKLERS Clean STIXX MCC-EB12 - Expanded Beam Lens
Disconnect both cable ends for safety
reasons.
Do not stare into beams or view directly with
optical instruments.
Remove the protection cap.
Check the lenses for contamination.
If there is no visible contamination.
® No cleaning necessary.
A – small contamination:
Use the dust remover to apply air to the lenses.
A
B
C
D
A
B
NO2M4DW-FX
NO4M4DW-FX
D
C
AIR

HANDLING INSTRUCTION - 2 & 4-channel Chassis Connector FIBERFOX
I
Page 2
Draft. Nr.: BDA 626 V1 Update: 2021-05-26
I
www.neutrik.com
Neutrik AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
Neutrik USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
Neutrik UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
Neutrik Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Neutrik France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
Neutrik Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
Neutrik Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
R
Data subject to change without prior notice. 2021 NEUTRIK . NEUTRIK are registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
® ®
©
E
F
B – heavy contamination:
Moisten the tip of the STICKLERS Clean STIXX
with some drops of destilled water.
Apply the moistened tip to the lens.
Remove dust residuals by rotating the tip of the
swab.
Rotate the swab six to eight times in one direction.
Dry the entire surface with a lint-free wipe or a
similar material.
After cleaning the lenses apply the protection cap.
DESTILLED
WATER
NO4M4DW-FXNO2M4DW-FX
6 - 8 x
Clean STIXX
E
F
GG
HH
NO4M4DW-FXNO2M4DW-FX