NEUTRIK NAC3FX Product guide

Place bushing and
chuck over the cable.
Prepare cable as
shown.
A
B
OPERATING & ASSEMBLY INSTRUCTION
NAC3FX powerCON TRUE1
|
R
Page 1
ASSEMBLY INSTRUCTION
1.
2.
[0.32"]
8 mm
[0.787”]
20 mm
[0.9”]
PE 23 mm
[0.32"]
8 mm
[0.787”]
20 mm
[0.9”]
PE 23 mm
1.
2.
OPERATING INSTRUCTION
Application:
The powerCON TRUE1 system is certified as connector with breaking capacity according IEC 60320,
VDE 0625. It is intended for use as appliance couplers and interconnection couplers. It serves to supply
power to an appliance and from an appliance to another equipment. To be installed by qualified person only.
Connector Assignment:
APPLIANCE
APPLIANCE INLET APPLIANCE OUTLET
COMBINATION
INLET OUTLET
NAC3MX
(Plug connector)
Power OUT
NAC3PX
NAC3FX
(Connector)
Power IN
NAC3MPX
Power IN
NAC3FX
(Connector)
Power OUT
NAC3FPX
NAC3MX
(Plug connector)
Approval based:
Rating:
Cable Type:
Strain Relief:
Cable O.D.:
VDE
EN 60320-1/EN60320-2-2
250 V ac / 16 A
2
H05VV-F3G 1.0 mm
2
.5 - 2.5 mm
White chuck
6.3 - 11.4 mm
, Length max. 2 m
H05VV-F3G 1
UL
UL 498 / CSA C22.2 No. 182.3
250 V ac / 20 A
SJT 3 x 12 AWG
Black chuck
9.5 - 12.0 mm

ASSEMBLY INSTRUCTION powerCON TRUE1
I
R
Draft. Nr.: BDA 290 / 3102M1891 Update: 14.05.2012
I I Data subject to change without prior notice. 2012 NEUTRIK . ALL RIGHTS RESERVED.
®
©
www.neutrik.com
NEUTRIK AG LI T: +423 /237 24 24 F: +423 /232 53 93
NEUTRIK USA Inc. USA T: +1 732 /901 9488 F: +1 732 /901 9608
( )
NEUTRIK UK Ltd. UK T: +44 1983 /811 441 F: +44 1983 /811 439
NEUTRIK Vertriebs GmbH DE /NL /AT/DK T: +49 8131 /280 890 F: +49 8131 /280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
R
Page 2
Disassembly (open twist lock):
1. Press with screw driver to unlock
2. Turn bushing while still pressing locking.
(at )
q
E
D
CSlide the cable into the contacts and clamp with
the screw.
Wiring VDE UL
Slide insert and chuck into housing.
Slide the cable clamp bushing up the cable and
tighten it with the tool as shown.
(Tool available: Art. No. HTAC)
L brown black
N blue white
green /yellow green
Þ
Þ
Þ
Important: Align the chuck by positioning the
nose into keyway.
4.
5.
Torque Value 2.0Nm
PRESS FIRMLY
3.
1.
2.
Wrench size
10 mm
1.
2.
Torque Value 0.7 Nm