Nevadent NSZB 3.7 B3 User manual

IAN 303047
SONIC TOOTHBRUSH NSZB 3.7 B3
SONIC TOOTHBRUSH
Operating instructions
SCHALLZAHNBÜRSTE
Bedienungsanleitung

GB/IE/NI Operating instructions Page 1
DE/AT/CH Bedienungsanleitung Seite 13
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie
sich anschließend mit allen Funktionen des Gerätes vertraut.

A
B

NSZB 3.7 B3 GB│IE│NI │ 1 ■
Contents
Introduction........................................ 2
Intended use ....................................... 2
Package contents ................................... 2
Appliance description................................ 2
Technical details .................................... 2
Safety information .................................. 3
Setting up ......................................... 4
First use ........................................... 4
Fitting/removing the brush head/interdental brush/
floss attachment .................................... 4
Operation ......................................... 5
Cleaning your teeth with the brush head................ 5
Cleaning with the interdental brush .................... 6
Cleaning with the floss attachment..................... 7
Cleaning and care................................... 8
Travel lock......................................... 9
Disposal........................................... 9
Ordering replacement parts ......................... 10
Kompernass Handels GmbH warranty ................ 11
Service ....................................................12
Importer ...................................................12

NSZB 3.7 B3
■ 2 │ GB│IE│NI
Introduction
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions are part
of this product. They contain important information about safety, usage and
disposal. Before using the product, please familiarise yourself with all operating
and safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to any
future owner.
Intended use
This appliance is intended exclusively for personal dental care at home. This
appliance is intended solely for use in private households. The appliance is
not intended for use in industrial or medical environments. It is not suitable for
animal care. Do not use it for commercial purposes.
Package contents
Handset
8 brush heads
Charger
Operating instructions
NOTE
Check contents for completeness and damage immediately after unpacking.
Contact customer service if necessary.
Remove all packaging materials and plastic films from the appliance.
Appliance description
Figure A:
1Brush head
2Drive shaft
3Lid
4Brush holders
5Charger
6Charge indicator
7“Pulse” LED (yellow)
8“Soft” LED (green)
9“Clean” LED (orange)
0On/Off switch
Figure B:
qGuide grooves
wFixture
eFloss attachment
rInterdental brush
Technical details
Power supply: 100–240 V ∼ (alternating current), 50/60 Hz
Power consumption: 2 W
Rechargeable battery: Li-ion battery, 600 mAh, 3.7 V
Protection type (charger): IP X7 (protected against the ingress of water
during temporary immersion)
Protection class: II/
Charging time: approx. 14 - 16 hours (first charge)
Protection type (handset): IP X7 (protected against the ingress of water dur-
ing temporary immersion)

NSZB 3.7 B3 GB│IE│NI │ 3 ■
Safety information
DANGER – RISK OF ELECTRICAL SHOCK!
► To avoid damage, do not allow liquids to enter
the appliance and do not submerge it in water.
► Ensure that no foreign objects enter the appliance.
► In the event of malfunctions or obvious damage,
please contact our customer service department.
► Ensure that the power cable can never become
wet or damp during operation. Route the power
cable in such a way that it cannot become
trapped or damaged in any other way. Danger
of electric shock!
► The mains cable of this appliance cannot be
replaced. If the cable is damaged, the whole
appliance must be scrapped.
► Never touch the charger if it has fallen into
water. Remove the plug from the wall socket
first! Danger of electric shock!
Do not submerge the handset or the charger
in water or other liquids.
WARNING – RISK OF INJURY!
► Toothbrushes may be used by children and
by persons with reduced physical, sensory or
mental capabilities or lack of experience and/
or knowledge, if they are supervised or have
been told how to use the appliance safely and
are aware of the potential risks.
► Cleaning and user maintenance should not be
carried out by children, unless they are under
supervision.
► Do not allow children to play with the appliance.
CAUTION – PROPERTY DAMAGE!
► The electric toothbrush may only be recharged
with the supplied charger.
Otherwise, the appliance could be irreparably
damaged!
► Operate the appliance only with the original
accessories supplied.

NSZB 3.7 B3
■ 4 │ GB│IE│NI
Setting up
NOTE
► In damp rooms, especially in the vicinity of water (bath), the charger 5
must be set up so that it cannot accidentally fall into the water.
1) Place the charger 5on a clean and level surface.
Ensure that the charger 5cannot fall into water, such as into a bath or sink.
First use
NOTE
Before starting to use the appliance, check that it is in fault-free condition.
You must not use the appliance if it has any faults.
1) Insert the power plug into the socket.
2) Before the first use, clean the new brush head 1/ the interdental brush r/
the floss attachment ewith clear water.
3) Open the lid 3and place the replacement brush heads, the interdental
brush rand/or the floss attachment einto the brush holders 4as
required. Close the lid 3.
4) Place the handset on the charger 5so that it slides onto the pin on the
base.
5) Allow the handset to charge for around 14–16 hours before using it for
the first time. The charge indicator 6on the front of the handset lights up
red during the charging process.
6) Use the handset repeatedly without charging the battery until the perfor-
mance becomes noticeably weaker or the toothbrush stops working and
the charge indicator 6flashes red. Then recharge the battery for 14 - 16
hours. When the appliance is fully charged, the charge indicator 6lights
up green.
7) Charge and discharge the toothbrush completely 3 times. At that point, the
battery will have reached its full capacity.
8) You can now leave the handset on the charger 5after every use, so as to
always have full power available.
Fitting/removing the brush head/interdental
brush/floss attachment
■ To remove the respective attachment pull it upwards and off the drive shaft 2.
■ When fitting the attachment, ensure that the drive shaft 2on the handset
slides precisely into the socket on the attachment.
Push the attachment down until it completely covers the drive shaft 2.
NOTE
We recommend only using original attachments. You can order replacement
attachments at any time (see section “Ordering replacement parts”).
► You can also use the replacement brush heads of the model Oral B©
Sonic Complete* for this appliance.
*Oral-B is a registered trademark of Procter & Gamble.

NSZB 3.7 B3 GB│IE│NI │ 5 ■
Operation
This toothbrush has 3 different power levels:
–“Clean”: normal speed, orange “Clean” LED 9
For cleaning the teeth.
–“Soft”: slow speed, green “Soft” LED 8
For cleaning the teeth of people with sensitive gums.
–“Pulse”: slow speed with short breaks, yellow “Pulse” LED 7
For massaging the gums.
■ Press the on/off switch 0once to activate the “Clean” mode. The “Clean”
LED 9lights up.
■ Press once more to switch to “Soft” mode. The “Soft” LED 8lights up.
■ Press it a third time to switch to “Pulse” mode. The “Pulse” LED 7lights up.
■ To switch the toothbrush off, press the on/off switch 0once more.
NOTE
If you operate one of the modes for longer than 10 seconds and then
press the On/Off switch 0, the toothbrush will switch off.
Next time you switch it on, the toothbrush will automatically start in the
mode you were using last.
To change the mode again, press the On/Off switch 0repeatedly until
the appliance switches to the required mode as described above.
Cleaning your teeth with the brush head
WARNING!
The unfamiliar stimulation may cause light gum bleeding at first. This is normal.
If this continues for more than two weeks, you should consult your dentist.
1) Place the brush head 1on the handset.
2) Moisten the brush under flowing water.
3) Put a little toothpaste onto the wet brush.
NOTE
To avoid being sprayed, do not switch on the appliance until it is in your
mouth.
4) Use the on/off switch 0to select the desired operating mode.
NOTE
This toothbrush has a 30-second interval timer, so that all four jaw quadrants
can be cleaned evenly.
5) Divide your mouth into four parts (quadrants): upper left, upper right,
lower left and lower right.

NSZB 3.7 B3
■ 6 │ GB│IE│NI
6) Start in one quadrant:
Start with the brush head 1on your gums, and move the brush upwards/
downwards from the gums to the crown of the tooth.
Continue in this manner on both the inside and the outside of the tooth.
Start again at the gums for each individual tooth.
Do not forget to brush the back of the rear molars.
To clean the chewing surfaces, guide the brush over them with a little
pressure.
7) After 30 seconds, the toothbrush stops briefly to signal that you should
start cleaning the next quadrant. Clean each jaw quadrant using the same
technique.
8) After two minutes, the toothbrush stops briefly 2 times. This informs you
that you have complied with the dental recommendation of two minutes
cleaning.
9) Press the on/off switch 0repeatedly until the toothbrush stops.
10) Then take the toothbrush out of your mouth.
11) After use, rinse the brush head 1thoroughly under running water.
12) Remove the brush head 1from the handset.
To clean the drive shaft 2and the handset, hold them under running wa-
ter for a short while. Hold the handset so that the drive shaft 2is pointing
downwards at an angle.
NOTE
Massage your gums regularly. This promotes blood circulation and helps to
keep them healthy. Set the mode to "Pulse" and guide the moistened brush
over your gums with a light pressure.
Cleaning with the interdental brush
You can use the interdental brush rto clean the interdental spaces, difficult-
to-access parts on the teeth, or the chewing surfaces of your molars.
1) Attach the interdental brush rto the hand element.
2) Moisten the interdental brush runder running water.
3) Put a little toothpaste onto the wet interdental brush r.
NOTE
To avoid splashes, do not switch on the appliance until it is in your mouth.
4) Use the On/Off switch 0to select the desired operating mode and clean
the required area.
5) Press the On/Off switch 0repeatedly until the appliance stops.
6) Then take the interdental brush rout of your mouth.
7) After use, clean the interdental brush rthoroughly under running water.
8) Remove the interdental brush rfrom the hand element.
To clean the drive shaft 2and the handset, hold them under running water
for a short while. Hold the handset so that the drive shaft 2is pointing
downwards at an angle.
NOTE
The interdental brush ris ideal for cleaning braces or false teeth.

NSZB 3.7 B3 GB│IE│NI │ 7 ■
Cleaning with the floss attachment
You can use the floss attachment eto clean interdental spaces with the aid of
dental floss.
1) Place the floss attachment eon the hand element.
2) Take around 15 cm of standard commercial dental floss and wrap one
end around the fixture w2–3 times.
NOTE
If the dental floss slips off the fixture w, you can tighten the screw with a
Phillips screwdriver.
3) Pass the dental floss tightly through the guide grooves qon the floss at-
tachment e.
4) Then wrap the other end around the fixture w2–3 times so that the
dental floss is stretched taut and does not come undone while cleaning the
interdental spaces.
5) Guide the dental floss between two teeth with the toothbrush switched off.
6) Switch the appliance on. When cleaning with the floss attachment e, use
the settings “Clean” or “Soft”.
7) Clean the interdental space with careful up-and-down movements.
8) Clean all the interdental spaces as described above.
9) When you are finished, switch off the toothbrush and take it out of your
mouth.
10) Remove the dental floss from the fixture wand dispose of it.
11) After use, clean the floss attachment ethoroughly under running water.
12) Remove the floss attachment efrom the hand element.
To clean the drive shaft 2and the handset, hold them under running water
for a short while. Hold the handset so that the drive shaft 2is pointing
downwards at an angle.