Night Owl Tiger-4500 User manual

User’s Manual
1
TABLE OF CONTENTS
FCC RADIATION NORM:...........................................................................................................................................3
PACKAGE CONTENTS: ............................................................................................................................................4
SYSTEM REQUIREMENTS:.......................................................................................................................................4
CHAPTER 1: DVR FEATURES..................................................................................................................................5
CHAPTER 2: LAYOUT...............................................................................................................................................6
2.1 FRONT PANEL.....................................................................................................................................................6
2.1.1 Front Panel Buttons.................................................................................................................................6
2.2 REAR PANEL ......................................................................................................................................................7
2.2.1 Rear Panel Inputs.....................................................................................................................................7
2.3 REMOTE CONTROLLER ........................................................................................................................................7
CHAPTER 3: INITIAL SETUP.....................................................................................................................................8
3.1 CONNECTING THE DVR TO A TVOR MONITOR........................................................................................................8
3.2 CONNECTING THE POWER SUPPLY........................................................................................................................8
3.3 CONNECTING THE CAMERAS ................................................................................................................................8
CHAPTER 4: DVR MAIN MENU.................................................................................................................................9
4.1 BROWSING THE MAIN MENU.................................................................................................................................9
4.2 MENU OVERVIEW ................................................................................................................................................9
4.3 CAMERA SETUP ................................................................................................................................................10
4.4 RECORD SETUP ................................................................................................................................................10
4.5 RECORD FRAME RATE .......................................................................................................................................10
4.6 VIDEO QUALITY.................................................................................................................................................11
4.7 RECORD SCHEDULE ..........................................................................................................................................11
4.8.1 Motion Detector Setup...........................................................................................................................12
4.9 HARD DRIVE SETUP ..........................................................................................................................................13
4.9.1 Hard Drive Installation...........................................................................................................................13
4.9.2 Detecting Installed Hard Drive...............................................................................................................13
4.9.3 Formatting Hard Drive ...........................................................................................................................14
4.9.4 Checking Firmware Version..................................................................................................................14
4.10 MISCELLANEOUS SETUP ..................................................................................................................................14
4.10.1 Miscellaneous Setup –Changing Password.......................................................................................14
4.10.2 Miscellaneous Setup –Set Time .........................................................................................................15
4.10.3 Miscellaneous Setup –Hidden Channel .............................................................................................15
4.10.4 Miscellaneous Setup –Audio Port Setup............................................................................................15
4.10.5 Miscellaneous Setup –Image Parameters..........................................................................................15
4.10.6 Miscellaneous Setup –Password Enable...........................................................................................16
4.10.7 Miscellaneous Setup –Keypad Tones................................................................................................16
4.10.8 Miscellaneous Setup –SEQ. DWELL TIME.........................................................................................16

User’s Manual
2
4.10.9 Miscellaneous Setup –Video Loss Sound..........................................................................................17
4.11 NETWORK SETUP............................................................................................................................................17
4.11.1 Network Setup –Intranet (Internal Access) ........................................................................................17
4.11.2 Network Setup –Global Access (Connected Directly to Modem)......................................................19
4.11.3 Network Setup –Global Access (Connected through a Router or Firewall) .....................................22
4.12 LANGUAGE .....................................................................................................................................................28
4.13 RESET MENU ..................................................................................................................................................28
CHAPTER 5: RECORD............................................................................................................................................29
5.1 START RECORDING ...........................................................................................................................................29
5.2 AUDIO RECORDING............................................................................................................................................29
5.3 STOP RECORDING .............................................................................................................................................30
5.4 ESTIMATED RECORDING LENGTH........................................................................................................................30
CHAPTER 6: PLAYBACK........................................................................................................................................31
6.1 PLAYBACK CONTROL ........................................................................................................................................31
CHAPTER 7: USB PROGRAMMING........................................................................................................................32
7.1 SOFTWARE INSTALLATION..................................................................................................................................32
7.2 PROGRAM INTERFACE .......................................................................................................................................32
7.3 PROGRAM RUNNING ..........................................................................................................................................33
7.3.1 HDD Play Mode ......................................................................................................................................33
7.3.2 FILE Play Mode ......................................................................................................................................35
7.3.3 NET Play Mode.......................................................................................................................................36
7.4 IE REMOTE CONTROL DVR................................................................................................................................36
CHAPTER 8: SPECIFICATIONS..............................................................................................................................38

User’s Manual
3
FCC RADIATION NORM:
FCC
This equipment has been tested and found to comply with limits for Class B digital device pursuant
to Part 15 of Federal Communications Commission (FCC) rules.
FCC Compliance Statement
These limits are designed to provide reasonable protection against frequency interference in
residential installation. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed or used in accordance with the instructions, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in television
reception, which can be determined by turning the equipment off and on. The user is encouraged to
try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected to.
CAUTION!
The Federal Communications Commission warns the user that changes or modifications to the unit
not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

User’s Manual
4
PACKAGE CONTENTS:
Your new Security Camera and DVR Kit will ship with the following items.
SYSTEM REQUIREMENTS:
Please be sure the computer that you install the included software with complies with the following
specifications:
- IBM PCs or 100% Compatibles
- Windows®XP, Vista, 7
- Internet Explorer 7 or Newer Web Browser Software
- CD-ROM Drive (for software installation)

User’s Manual
5
CHAPTER 1: DVR FEATURES
MPEG4 Compression
4-CH Video Input- 1-CH Video Output
Audio Input / Output: 1-CH Audio Input / 1-CH Audio Output;
System Format: NTSC
Linux operation System
Supports Multi recording Modes
Continuous
Motion Detection
Time Scheduled
Supports Event List and Search/Playback
Video signal Loss Alarm
Password Protection
Supports IR Remote Controller
Hard drive Support up to 500GB

User’s Manual
6
CHAPTER 2: LAYOUT
2.1 Front Panel
2.1.1 Front Panel Buttons
LED
HDD: Will light up Red when Recording
PWR: Will light up green when powered on
Buttons
CH1 : Select to view CH 1 only
CH2 : Select to view CH 2 only
CH3 : Select to view CH 3 only
CH4 : Select to view CH 4 only
Quad : View all 4 channels at once
PLAY : Play a recorded file
REW : Rewind during playback
PAUSE : Pause during playback
FWD : Forward during playback
STOP : Stop Playback or Stop Recording
REC : Select to begin recording
:Menu/ESC/Left
:Select/Edit/Right
UP:
DOWN

User’s Manual
7
2.2 Rear Panel
2.2.1 Rear Panel Inputs
AUDIO OUTPUT
AUDIO INPUT: Input from an audio enabled device (not included)
LAN: Ethernet Port
VIDEO OUTPUT: Output to your TV
CH1: Video Input 1 (Camera 1)
CH2: Video Input 2 (Camera 2)
CH3: Video Input 3 (Camera 3)
CH4: Video Input 4 (Camera 4)
DC: DC Power Input Jack
2.3 Remote Controller
(For reference only)
1-4
Channel Select 1-4
5-9 & 0
Digital Key 5-9, 0
ALL
Display all Channels –Quad View
Menu
Enter / Exit Menu
▲
UP
▼
Down
SEL
Select
Rewind
Play
Forward
●
Record
Pause / Playback
■
Stop
Audio
No function for this particular model
Mute
Turn on/off Audio

User’s Manual
8
CHAPTER 3: INITIAL SETUP
3.1 Connecting the DVR to a TV or Monitor
Using the supplied BNC to RCA connector
1. Connect the BNC to RCAconnector to the back of the DVR labeled Video Output ( refer to
Chapter 2.2 Rear Panel Picture)
2. Connect the other end of the cable to an open RCAVIDEO input on your TV or Monitor
3. Select the appropriate video input on your TV or Monitor to view the DVR
NOTE: Your DVR must be powered on so you can view on your TV or Monitor.
3.2 Connecting the Power Supply
1. Plug the provided power supply into the back of the DVR labeled “DC12V”
2. Plug the other end of the power Adapter into any 110V outlet within your home or business.
NOTE: Connecting your DVR and Cameras power source into a UPS or battery backup system will
provide you recorded coverage after power failures. Time depends on type of UPS used.
3.3 Connecting the Cameras
NOTE: Prior to mounting the cameras to their desired destination, please ensure all 4 cameras are
working. Perform these steps near the DVR. Once all 4 cameras are up and running then you can
lay the cables and mount the cameras to their desired location.
1. Each camera comes with 60ft. of cable per camera. Using one cable per camera, plug each
BNC connector of the camera into the 60ft cable.
2. Plug the other end of the cables into the back of the DVR labeled “CH1, CH2, CH3 and
CH4.
3. Connect the provided 4-way power splitter to the DC jacks of the cameras, and plug the
power splitter into the camera adapter and connect the camera adapter to any 110V outlet
or UPS.

User’s Manual
9
CHAPTER 4: DVR MAIN MENU
4.1 Browsing the Main Menu
After completing the initial setup, press the “Menu”
button on the remote control to enter the DVR’s Main
Menu as shown.
NOTE: The DVR cannot be recording when trying to access the menu. Please press the stop
button on the remote control to stop recording. Once recording has stopped then you can click the
Menu button to access the main menu.
4.2 Menu Overview
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY HIGH
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE
RESET MENU
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND

User’s Manual
10
4.3 Camera Setup
Camera setup allows you to turn cameras on or off for
viewing and recording. Record setup allows you to set
which channels will record. After you have selected the
Camera Setup Option, press [▲，▼，◄◄ and ►►]
button to select a channel, and then press [SEL] to
modify the setting to “on” or “off”.
Note：If a channel is set to “OFF” the user will be unable to view or record from this channel. This
will also affect the overall frame rate for all cameras.
4.4 Record Setup
Record setup allows you to set which channels will
record. After you have selected the Record Setup
Option, press [▲，▼，◄◄ and ►►] button to select a
channel, and then press [SEL] to modify the setting to
“on” or “off”.
If a channel is disabled in camera setup or not plugged
in, it will not be recorded and the characters “NOCAM”
will be displayed on the screen.
4.5 Record Frame rate
The maximum frame per second rate is 60fps for NTSC
(US) or 50fps for PAL (Europe). For example, if you
have all 4 cameras connected and set to record, you
may set the frame rate to 15 for each camera (15fps *4
Channels = 60fps total).
After you have selected the Record Frame rate Option,
press [▲，▼，◄◄ and ►►] button to select a channel,
and then press [SEL] to increase the value or press
[Stop] to reduce the value.
1 3 FPS 2 5FPS
RECORD FRAMERATE
TOTAL 36 FPS
3 25FPS 4 3FPS
( )MOVE (SEL)+ ( ■)- (MENU) EXIT
1 ON 2 NO
RECORD SETUP
3 ON 4 ON
( )MOVE (SEL) SELECT (MENU) EXIT
1 on 2 on
CAMERA SETUP
3 on 4 on
( )MOVE (SEL) SELECT (MENU) EXIT

User’s Manual
11
Note: The higher the frame rate, the smoother the recorded images will be, but more disc space will
be required. Ifleaving for an extended period of time (over 1 month), please lower the frame rate per
channel, use a low frame rate and set to motion activated to prolong the recording time of your Hard
Disk Drive.
4.6 Video Quality
There are 4 options for Video Quality Settings: Highest,
High, Normal and Low.
After you have selected the Video Quality option, press
[SEL] button to change the video quality setting.
Note: The higher the video quality, the smoother the recorded images will be, but more disc space
will be required. If leaving for an extended period of time (over 1 month), please lower the frame rate
per channel, use low video quality and set to motion activated to prolong the recording time of your
Hard Disk Drive.
4.7 Record Schedule
This feature will allow the user to set the recording
method to use during the selected time.
After you have selected the Record Schedule option,
the time line indicates the 24 hours of a day based on
AM/PM (0-12). Press [▲，▼，◄◄ and ►►] button to
select a time, press [SEL] button to change the
recording mode.
1. NO-RECORD [WHITE]: DVR will not record during
the selected time period.
2. NORMAL RECORD [ RED]: DVR will record
continuously during the selected time period.
3. SENSOR RECORD [ S]: DVR will record when a
sensor or motion is triggered during the selected
time period.
Note: In order to activate the record schedule please press the [ REC] button to start the recording
schedule.When the [ REC] button is pressed you will see the text “S-REC” in the bottom left portion
of the screen. This indicates that the DVR will begin recording based upon the user’s record
schedule above. If the [ REC] button is not pressed the DVR will NOT record any data.
Note: By default the DVR is set to Motion Detection recording for all times.
RECORD SCHEDULE
AM PM
0… 3… 6… 9… 0… 3…. 6… 9…
NO-RECORD
NORMAL-RECORD
SENSOR -RECORD
( )MOVE (SEL)SELECT (MENU) EXIT
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY HIGH
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT

User’s Manual
12
4.8 Sensor Setup
SENSORED RECORD TIME indicates how long the
DVR will continue to record after the motion or sensor is
triggered.
ALARM ON TIME indicates whether the audio buzzer
will sound, and for how long, when motion is detected.
CONT: Continuous alarm until any key is pressed on the remote or DVR
OFF: No alarm
Note: “Sensored Record Time” and “Alarm On Time” are measured in seconds.
4.8.1 Motion Detector Setup
This section allows you to set up motion detection options for each camera.
On/Off : Enable or disable motion detection recording.
Level: Sensitivity for motion detection. There are 3
levels sensitivity: Level 1-low, Level 2-mid, and Level
3-High
Area: Select detectable area on the screen.
Area Selection：Press the [▲，▼，◄ and ►] buttons
to select a block and then press the [SEL] button to set
the block to detect motion. The area is detectable when
it is clear, the area is not detectable when it is blacked
out. Press the “MENU” button to set.
NOTE: Press the “Stop” button to disable the entire area or press the “ALL” button to select the
entire area.
MOTION DETECTOR SETUP
CH1 ON Level 2 Area
CH2 ON Level 2 Area
CH3 ON Level 2 Area
CH4 ON Level 2 Area
( )MOVE (SEL)SELECT (MENU)EXIT
SENSOR SETUP
SENSORED RECORD TIME 30
ALARM ON TIME 05
MOTION DETECTOR SETUP
( )MOVE (SEL)SELECT (MENU)EXIT

User’s Manual
13
4.9 Hard Drive Setup
OVERWRITEENABLED：
ON: overwrite oldest video when hard drive is full
(recommended).
OFF: Stop recording when hard drive is full.
HDD SIZE：indicates the total capacity of the hard disk drive installed in the DVR.
HDD USED：indicates the space usedin the hard disk drive for recording and the percentage used.
HDD FORMAT：WARNING! This will completely erase all data on the hard drive.
Note: You will be prompted for the password when formatting the hard drive; the default password is
“111111”.
4.9.1 Hard Drive Installation
Note: Your DVR comes with a preinstalled Hard Disk Drive. Do not attempt to remove the hard drive.
Changing the hard drive will void all warranty. If you would like to replace the hard drive please call
Technical Support for further information.
4.9.2 Detecting Installed Hard Drive
Once powered on your DVR, the DVR will automatically
detect the installed hard drive and show the hard drive
information.
CHECKING HDD……
MASTER [MAXTOR STM3250310A]
SLAVE……
HARD DRIVE SETUP
OVERWRITE ENABLED [ ON]
MAXTOR STM250310AS
MASTER HDD SIZE 250203MB
MASTER HDD USED 124931MB 50%
MASTER HDD FORMAT
SLAVE HDD SIZE N/A
SLAVE HDD USED N/A
SLAVE HDD FORMAT
( )MOVE (SEL)SELECT (MENU)EXIT

User’s Manual
14
4.9.3 Formatting Hard Drive
When detecting a new hard drive, the DVR will
automatically prompt you to format the hard drive before
using.
Please press the [SEL] button to format, or [MENU]
button to cancel.
4.9.4 Checking Firmware Version
After powering on the unit, the DVR will boot-up and
display the current version and released date of the DVR
firmware.
4.10 Miscellaneous Setup
4.10.1 Miscellaneous Setup –Changing Password
This option allows you to change the system password.
The password must be composed of six characters. All
keys can be used as a character except the [MENU] key
which is used to exit.
Enter the current password (Default Password =
111111) and then enter six characters as your new
password. Repeat the new password to confirm.
If you forget your password, please free feel to contact
our technical service department for a factory reset.
CHECKING HDD……
MASTER [MAXTOR STM3250310A]–NEW–DVR
FORMAT HDD CONFIRM
(SELECT) FORMAT / (MENU) CANCEL?
V2.X
V-EN-BG
2009.XX.XX
CURRENT PASSWORD
NEW PASSWORD
COMFIRM PASSWORD
[- - - - -]
[- - - - -]
[- - - - -]
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]

User’s Manual
15
4.10.2 Miscellaneous Setup –Set Time
The system date and time format is YYYY/MM/DD and
HH:MM:SS.
Press the [◄] or[►] buttons to select a data point then
press the [SEL] button to modify the data. Press the
[MENU] button to save.
4.10.3 Miscellaneous Setup –Hidden Channel
The system provides a function to hide a channel in
viewing mode. The selected channel can still be
recorded while it’s hidden but the images are not
viewable during live view.
Press the [SEL] button to select a channel to hide.
4.10.4 Miscellaneous Setup –Audio Port Setup
Audio Port –Video Channel: Select which camera
channel will the “Audio-In” port paired with when
recording audio.
Audio Port-Record: Select “ON” to record audio or
“OFF” not to record.
4.10.5 Miscellaneous Setup –Image Parameters
This function will allow you to set the Contrast,
Brightness, Hue and Saturation of each camera. Select
the appropriate camera you would like to adjust by using
the [◄] or [►] buttons. Press the [SEL] button to access
that cameras parameters.
SET TIME
2008/11/11 17:50:01
( )MOVE (SEL)SELECT (MENU) EXIT
AUDIO PORT SETUP
AUDIO PORT1-VIDEO CHANNEL
AUDIO PORT1-RECORD
( )MOVE (SEL)SELECT (MENU)EXIT
[ 1 ]
[ OFF ]
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]

User’s Manual
16
CON：Contrast
BRI：Brightness
HUE：Hue
SAT：Saturation
Press the [▲] or [▼] button to select the item and press
the [◄] or [►] buttons to adjust the parameter.
4.10.6 Miscellaneous Setup –Password Enable
When Password Enable is set to “ON”, the password will
be required to enter the Main Menu of the system or
stop/start recording.
If password Enable is set to “OFF” no password will be
required and any user can make changes or delete files
from the DVR.
4.10.7 Miscellaneous Setup –Keypad Tones
The function allows you to enable or disable the audio
buzzer when pressing any button on the remote control
or DVR.
4.10.8 Miscellaneous Setup –SEQ. DWELL TIME
Press the [SEL] buttons to Select “on” / “off”, or select
the desired Seq. Dwell time between OFF, 1s, 5s, 10s,
15s, 30s and 60s.
Note: to start the sequence function, press the PAUSE
button on front panel or remote while in display mode.
Press Pause again to stop the function.
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]

User’s Manual
17
4.10.9 Miscellaneous Setup –Video Loss Sound
This option allows your DVR to emit a high pitch
notification sound when the signal between the camera
and the DVR is loss. Press the [SEL] buttons to Select
“on” / “off”.
4.11 Network Setup
4.11.1 Network Setup –Intranet (Internal Access)
If your DVR is connected to a router of your local network (intranet), then you can setup the
NETWORK Setup section of the DVR to view the image your DVR is recording remotely using
computers connected within your network.
Important Note: You will not be able to access your DVR if your DVR is connected behind two
or more routers.
Note: Prior to changing the NETWORK Setupof your DVR, itis strongly recommended that you
perform the following tasks:
1. Access the configuration page of your router.
2. Reserve an IP Address in your router that is not used by other computers or devices
connected to your internal network.
3. Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of your
Router (Gateway) of your DVR for future reference when configuring the DVR.
MAC Address: is the unique ID of your DVR. Your
router or other computer in your network can use the
MAC Address to identify your DVR.
Important: MAC address should only be changed if
multiple DVRs are being setup on the same network
with same MAC Address.
IP Allocation: The DVR supports DHCP and Static IP
modes. But it is recommended that you use STATIC IP
because Static IP is a pre-defined address that will not
be changed. Using a static IP Address will make your
DVR much easier to locate by computers in your
network.
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80，1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80，1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]
[ 4 ]
[ CH4 ]
[ OFF ]
[ OFF ]
[ OFF ]
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( )MOVE (SEL)SELECT (MENU)EXIT
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]

User’s Manual
18
IP Address: Enter the IP Address that you have
reserved at the beginning of this section into this field to
be the unique address of your DVR in your local
network.
Subnet Mask：Subnet Mask is used to determine what
subnet an IP address belongs to. A number that is used
to identify a sub network so that IP address can be
recognized on a local area network. Consult your
modem/router for your LAN’s subnet mask. It is
recommended to leave the Subnet mask as the default
255.255.255.0.
Gateway: Set this to the IP Address of your router.
DNS Address：Set this to the IP Address of your router.
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80，1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80，1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80，1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80，1024-49151
( )MOVE (SEL) SELECT (MENU)EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]