Nippon Genetics FastGene Vortexer Mini User manual

NIPPON Genetics EUROPE –www.nippongenetics.eu
2
1. INTRODUCTION 2
2. PRODUCT FEATURES 3
3. PACKING LIST 3
4. SPECIFICATION 3
5. OPERATION INSTRUCTION 3
6. ORDERING INFORMATION 4
7. CONTACT 4
8. WARRANTY 4
The FastGene® Vortexer Mini was designed for a touch-to-mix (short
mix) action of a variety of tubes, e.g. centrifugal tubes. Its compact
footprint allows it to be positioned anywhere, while its touch-to-mix
operation makes it very easy handling and quite convenient. The
FastGene® Vortexer Mini is an essential experimental instrument with a
perfect mixing effect.

NIPPON Genetics EUROPE –www.nippongenetics.eu
3
1. The maximum diameter of the mixed tube is up to 30mm. Suit
for mixing tubes/centrifugal tubes with prominent mixing
effect.
2. Outer shell and touch concave are made of plastic which is
resistance to chemical attack. The heavy base makes the
mixing operation very steady and reliable.
3. Compact designed, smart and portable.
4. Speed is adjustable to meet different experimental requests.
Name
Type
Quantity
Vortexer Mini
VX2
1
Adapter
12V/1A
1
Operation Manual
1
DIMENSION
110 x 110 x 86 mm
WEIGHT
1.5 kg
SPEED
0 – 4000 rpm
POWER INPUT
AC 100-240V
POWER CONSUMPTION
≤10W
Put the instrument on a steady and horizontal bench top
Connect the Power with the matching adapter.
Hold the tube to and press the concave rubber
The instrument will begin operating.
Adjust the vortex speed by turning the knob in front.

NIPPON Genetics EUROPE –www.nippongenetics.eu
4
Product
Cat.No.
FastGene® Vortexer Mini
VX2
NIPPON Genetics EUROPE
Address: Binsfelder Strasse 77; Dueren, D-52351 Germany
Tel: [phone]
Fax: [phone]
Website: http://nippongenetics.eu
E-mail: [e-mail]
The FastGene® Vortexer Mini is warranted against defects in materials and workmanship for 1 year. If
any defects occur in the instrument or accessories during this warranty period, Nippon Genetics
Europe GmbH will repair or replace the defective parts at its discretion without charge. The following
defects, however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Nippon Genetics Europe GmbH or an authorized
agent.
3. Damage caused by substituting alternative parts.
4. Use of fittings or spare parts supplied by anyone other than Nippon Genetics Europe GmbH.
5. Damage caused by accident or misuse.
6. Damage caused by disaster.
7. Corrosion caused by improper solvent or sample.
For any inquiry or request for repair service, contact your local Nippon Genetics Europe GmbH office.
Inform Nippon Genetics Europe GmbH of the model and serial number of your instrument.