Noble House Home Furnishings Barstool User manual

BARSTOOL
1 OF 9
Please look in the Leg Panels for hardware packs
CAUTION: This Barstool is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever lifting the Barstool and to prevent any possible damage to it
two adults are needed to execute this action.

No. Picture Description Qty
A
B
1
1
Parts List
C1
E
1
Left Leg Panel
D
Seat Panel
1
2 OF 9
F
Backrest
Right Leg Panel
Front Leg Connection
Back Leg Connection 1
Noble House Home Furnishings LLC

Spring Washer M6
Washer M6/13 x 2mm
6
7
5
5
x 5
x 5
Before Beginning Assembly:
Assembly Preparation
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
No. Picture Description Qty
Hardware
1
2
5
3
4
Chair Hardware
3 OF 9
Allen Key
3
5
1
Noble House Home Furnishings LLC
Bolt M6 x 40mm
Screw M6 x 60mm
x 5
x 5
x 3
5
Bolt M6 x 90mm
Screw M6 x 70mm
5
x 5
x 1

Assembly Steps
FRONT FACING
OVERVIEW
Seat Panel (A)
Backrest (B)
Right Leg Panel (C)
Left Leg Panel (D)
Front Leg Connection(E)
Back Leg Connection(F)
Step 1
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
4 OF 9
This Barstool has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Barstool parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.

Step 2.1
Step 2.2
Step 2.1 Attach the Seat Panel (A) to the Left Leg Panel (D) using Bolts (4), Spring
Washer (5), Washer (6) and Allen Key (7).
Step 2.2 Attach the Seat Panel (A) to the Left Leg Panel (D) using Bolts (1), and
Allen Key (7).
5
6
Put the Seat Panel (A) onto Left Leg Panel (D) in the direction of the arrow as shown
in above picture.
Do not fully tighten the Bolts.
Step 2
A
D
477
1
Assembly Steps
Step 3
Noble House Home Furnishings LLC
B
5 OF 9
D
Put the Backrest (B) onto Left Leg Panel (D) in the direction of the arrow as
shown in the above picture.

5
6
47
Attach the Right Leg Panel (C) to the Seat Panel (A) using Bolts (4), Bolts (1), Spring
Washer (5), Washer (6) and Alley Key (7).
Secure the Right Leg Panel (C) to the Backrest (B) using Screws (2) and Allen Key (7)
Do not fully tighten the Bolts.
Assembly Steps
Step 4
Step 5
Noble House Home Furnishings LLC
6 OF 9
D
F
E
3
7
C
D
E
F
B
A
2
7
7
1
Put the Front Leg Connection (E) and Back Leg Connection (F) onto Left Leg Panel (D).
Then attach the Front Leg Connection(E) to the Left Leg Panel (D) using Screws (3)
and Allen Key (7).
Do not fully tighten the Screws.

C
D
E
F
B
A
3
7
2
7
Assembly Steps
Step 6
Attach the Right Leg Panel (C) to the Front Leg Connection (E) and Back Leg
Connection (F) using Screw (3) , Screw (2) and Alley Key (7).
Do not fully tighten the Screws.
Noble House Home Furnishings LLC
7 OF 9
C
D
2
7
F
With the assistance of your adult partner, stand the Barstool up. Then secure the Left
Leg Panel (D) to the Back Leg Connection (F) and Backrest (B) using Screws (2)
and Allen Key (7).
Do not fully tighten the Screws.
Step 7
B

Assembly Steps
8 OF 9
Noble House Home Furnishings LLC
Step 8
Exert pressure floorwards, onto the Barstool with both your hands.
This pressure will help the Legs and Barstool reach full alignment status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten Bolts and Screws in a sequential manner,
until evenly secured.
When tightening Bolts and Screws tighten sequentially.
Do not tighten any Bolt and Screw fully then move on towards the next one.
If there are still wobbles after tightening, loosen Bolts and Screws and excute the
same above process.
Your Barstool is ready for use.
This Barstool can only be used on a flat, level surface.

9 OF 9