Nokia BH 300 - Headset - Over-the-ear User manual

Nokia Bluetooth Headset
BH-300
Issue1
8
10
9
7
6
2
3
4
1
5

DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares
that this HS-50W product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. A copy
of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/.
© 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution, or
storage of part or all of the contents in
this document in any form without the
prior written permission of Nokia is
prohibited.
Nokia and Nokia Connecting People are
registered trademarks of Nokia
Corporation. Other product and company
names mentioned herein may be
trademarks or tradenames of their
respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of ongoing
development. Nokia reserves the right to
make changes and improvements to any
of the products described in this
document without prior notice.
Under no circumstances shall Nokia be
responsible for any loss of data or
income or any special, incidental,
consequential or indirect damages
howsoever caused.
The contents of this document are
provided "as is". Except as required by
applicable law, no warranties of any kind,
either express or implied, including, but
not limited to, the implied warranties of
merchantability and fitness for a
particular purpose, are made in relation
to the accuracy, reliability or contents of
this document. Nokia reserves the right
to revise this document or withdraw it at
any time without prior notice.
The availability of particular products
may vary by region. Please check with
your Nokia dealer for details.
0434

Unauthorized changes or modifications
to this device may void the user's
authority to operate the equipment.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and
other countries. Diversion contrary to
law is prohibited.
Introduction
The Nokia Bluetooth Headset
BH-300 allows you to make and
receive calls while on the move.
You can use the headset with
compatible phones that support
Bluetooth wireless technology.
Read this user guide carefully
before using the headset. Also read
the user guide for your phone,
which provides important safety
and maintenance information.
Keep all accessories and
enhancements out of the reach of
small children.
Bluetooth wireless
technology
Bluetooth wireless technology
allows you to connect compatible
devices without cables. The phone
and the headset do not need to be
in line of sight, but they should be
within 10 meters (30 feet) of each
other. Connections may be subject
to interference from obstructions,
such as walls, or other electronic
devices.
The headset complies with the
Bluetooth Specification 2.0 + EDR
that supports the Headset Profile

1.1 and Hands-Free Profile 1.5.
Check with the manufacturers of
other devices to determine their
compatibility with this headset.
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.
Get started
The headset contains the following
parts shown on the title page:
power key and indicator light (1),
microphone (2), charger connector
(3), answer/end key (4), changeable
earloop (5), and strap catch (6).
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the headset are magnetic.
Metallic materials may be attracted
to the headset. Do not place credit
cards or other magnetic storage
media near the headset, because
information stored on them may be
erased.
Chargers
Check the model number of any
charger before using it with this
headset. The headset is intended for
use with the AC-3, AC-4, and DC-4
chargers.
Warning: Use only
chargers approved by
Nokia for use with this
particular headset. The
use of any other types
may invalidate any
approval or warranty and
may be dangerous.
For availability of approved
enhancements, please check with

your dealer. When you disconnect the
power cord of any enhancement,
grasp and pull the plug, not the cord.
Charge the battery
The headset has an internal,
nonremovable, rechargeable
battery. Do not attempt to remove
the battery from the headset, as
you may damage the headset.
1. When the back of the headset is
facing you, detach the earloop
from the left of the headset.
2. Connect the charger to a wall
outlet.
3. Connect the charger cable to
the headset. The red indicator
light is on while charging. It
may take a while before
charging starts. If charging does
not start, connect the charger
again and retry. Charging the
battery fully may take up to
2hours.
4. When the battery is fully
charged, the red indicator light
turns off. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has
power for up to 5 hours and 30
minutes of talk-time or up to 150
hours of standby time. However,
the talk and standby times may
vary when the headset is used with
different mobile phones or other
compatible Bluetooth devices,
usage settings, usage styles, and
environments.
When battery power is low, the
headset beeps, and the red
indicator light starts to flash.