Nordson 380 User manual

NORDSON CORPORATION •AMHERST, OHIO •USA
This document is subject to change without notice.
Check http://emanuals.nordson.com for the latest version.
380 Sieve
Manual P/N 7156868A
−English−
Issued 11/10

P/N 7156868A E2010 Nordson Corporation 380 Sieve
Order number
P/N = Order number for Nordson products
Notice
This is a Nordson Corporation publication which is protected by copyright. Original copyright date 2010.
No part of this document may be photocopied, reproduced, or translated to another language without
the prior written consent of Nordson Corporation. The information contained in this publication is
subject to change without notice.
Trademarks
AccuJet, AquaGuard, Asymtek, Automove, Autotech, Blue Box, CF, Can Works, Century, Clean Coat, CleanSleeve, CleanSpray, ColorMax, Compumelt,
Control Coat, Cross-Cut, Cyclo-Kinetic, Dispensejet, DispenseMate, Durafiber, Durasystem, Easy Coat, Easymove Plus, Econo-Coat, EPREG, ETI,
Excel 2000, Flex-O-Coat, Flexi-Spray, Flow Sentry, Fluidmove, Fluidshooter, FoamMelt, FoamMix, Helix, Horizon, Hose Mole, Hot Shot, Hot Stitch,
Isocoil, Isocore, Iso-Flo, KB30, Little Squirt, Magnastatic, MEG, Meltex, Micromax, MicroSet, Millenium, Mini Squirt, Moist-Cure, MultiScan, Nordson,
OmniScan, Opticoat, Package of Values, PluraFoam, Porous Coat, PowderGrid, Powderware, Pro-Flo, ProLink, PRX, RBX, Rhino, S. design stylized,
SC5, SCF, Select Coat, Select Cure, Slautterback, Smart-Coat, Spray Squirt, Spraymelt, Super Squirt, Sure-Bond, Sure Coat, System Sentry,
Tela-Therm, Trends, Tribomatic, UniScan, UpTime, Versa-Coat, Versa-Screen, Versa-Spray, Watermark, When you expect more are registered
trademarks −®−of Nordson Corporation.
ATS, Auto-Flo, AutoScan, BetterBook, Chameleon, CanNeck, Check Mate, CPX, Control Weave, Controlled Fiberization, EasyClean, Ebraid, Eclipse,
Equi=Bead, Fillmaster, FlexiCoat, Gluie, Ink-Dot, JR, Maxima, MicroFin, Minimeter, Mountaingate, Multifil, OptiMix, Pattern View, PluraMix, Primarc,
Prism, Pro-Meter, Pro-Stream, Process Sentry, PurTech, Pulse Spray, Saturn, Seal Sentry, Select Charge, Select Series, Sensomatic, Shaftshield,
Spectral, Spectrum, Sure Brand, Sure Coat, Swirl Coat, Vista, Walcom, 2 Rings (Design) are trademarks −T−of Nordson Corporation.
Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes,
could lead to violation of the owners’ rights.

Table of Contents I
E2010 Nordson Corporation
All rights reserved 380 Sieve
Issued 10/10
P/N 7156868A
Table of Contents
General Information 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package contents 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Instructions 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Liability and Warranty 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quality Control 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
With Option Ultrasonic Sieve 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Commissioning 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparatory Work 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description of Functions 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Control 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Elements 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening the Machine 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapting Sieve Capacity 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aspiration 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Sieve 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Paint and Cleaning 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance Intervals 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance Intervals Table 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wearing and Spare Parts 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Declaration of Conformity
E2010 Nordson Corporation
All rights reserved 380 Sieve P/N 7156868A

Declaration of Conformity
E2010 Nordson Corporation
All rights reserved
380 Sieve
P/N 7156868A
DECLARATION of CONFORMITY
PRODUCT: 380 Sieve (Sieving Machine 380)
PRODUCT RANGE: All variants and models
Conformity has been verified following the provisions of the following directives:
EC Council Directive on Machinery 2006/42/EG in the version 2006/95/EG
STANDARDS USED TO VERIFY COMPLIANCE:
EN ISO 12100−1, EN ISO 12100−2, EN ISO 14121−1, EN 60 204−1, EN 1127−1, EN 12981
This product has been manufactured according to good engineering practice and conforms
to the specified directives and standards described above.
Date: 29th October 2010
Jens Kollosche
Operations Manager Nordson Germany
Nordson Deutschland GmbH
Heinrich−Hertz−Strasse 42/44
D−40699 Erkrath, Germany
Telephone: [phone]
Facsimile: 49.211.254658
E−Mail: [email protected]

Declaration of Conformity
E2010 Nordson Corporation
All rights reserved 380 Sieve P/N 7156868A

Introduction
E2010 Nordson Corporation
All rights reserved 380 Sieve Part 768660B
Congratulations on the Purchase of Your
Nordson Product
Nordson equipment is engineered and manufactured in accordance with strict
specifications, using high quality components and state-of-the-art technologies that
assure reliable, long-term performance. Your product was thoroughly tested for
proper operation prior to shipment.
Before unpacking and installing your new equipment, please read this manual. It is
your guide to safe installation, productive operation and effective maintenance. We
recommend that you keep the manual available for future reference.
Your Safety is Important to Nordson
Carefully read the Safety section. Your product is designed for safe operation when
used according to the published instructions. Potential hazards exist when
operating instructions are not followed.
Contact
Telephone: [phone]
Fax: [phone]
For a list of local Nordson organisations, see Nordson International.

Introduction
E2010 Nordson Corporation
All rights reserved
380 Sieve
Part 768660B

Introduction
E2010 Nordson Corporation
All rights reserved
Nordson International
http://www.nordson.com/Directory
Country Phone Fax
Europe
Austria 43-1-707 5521 43-1-707 5517
Belgium 31-13-511 8700 31-13-511 3995
Czech Republic 4205-4159 2411 4205-4124 4971
Denmark Hot Melt 45-43-66 0123 45-43-64 1101
Finishing 45-43-200 300 45-43-430 359
Finland 358-9-530 8080 358-9-530 80850
France 33-1-6412 1400 33-1-6412 1401
Germany Erkrath 49-211-92050 49-211-254 658
Lüneburg 49-4131-8940 49-4131-894 149
Nordson UV 49-211-9205528 49-211-9252148
EFD 49-6238 920972 49-6238 920973
Italy 39-02-904 691 39-02-9078 2485
Netherlands 31-13-511 8700 31-13-511 3995
Hot Melt 47-23 03 6160 47-23 68 3636
Poland 48-22-836 4495 48-22-836 7042
Portugal 351-22-961 9400 351-22-961 9409
Russia 7-812-718 62 63 7-812-718 62 63
Slovak Republic 4205-4159 2411 4205-4124 4971
Spain 34-96-313 2090 34-96-313 2244
Sweden 46-40−680 1700 46-40-932 882
Switzerland 41-61-411 3838 41-61-411 3818
United
Kingdom
Hot Melt 44-1844-26 4500 44-1844-21 5358
Finishing 44-161-495 4200 44-161-428 6716
Nordson UV 44-1753-558 000 44-1753-558 100
Distributors in Eastern & Southern Europe
DED, Germany 49-211-92050 49-211-254 658

Introduction
E2010 Nordson Corporation
All rights reserved
Outside Europe / Hors d’Europe / Fuera de Europa
SFor your nearest Nordson office outside Europe, contact the Nordson
offices below for detailed information.
SPour toutes informations sur représentations de Nordson dans votre
pays, veuillez contacter l’un de bureaux ci-dessous.
SPara obtener la dirección de la oficina correspondiente, por favor
diríjase a unas de las oficinas principales que siguen abajo.
Contact Nordson Phone Fax
Africa / Middle East
DED, Germany 49-211-92050 49-211-254 658
Asia / Australia / Latin America
Pacific South Division,
USA
1-440-685-4797 −
Japan
Japan 81-3-5762 2700 81-3-5762 2701
North America
Canada 1-905-475 6730 1-905-475 8821
USA Hot Melt 1-770-497 3400 1-770-497 3500
Finishing 1-880-433 9319 1-888-229 4580
Nordson UV 1-440-985 4592 1-440-985 4593

380 Sieve 1
P/N 7156868A
E2010 Nordson Corporation 380 Sieve
General Information
Thank you for choosing a 380 Sieve. To ensure safe and proper operation
of the product, please read this manual thoroughly before using the product
for the first time!
Please store this manual carefully.
Package contents
Sbearing flange
Shopper, straight outlet (optional)
Shopper, bent outlet (optional)
Sspacer
Slid
Ssieve frame
Sultrasonic sieve (optional)
Svibrator motor
Ssupports
Svertical tensioners
Spressure screws
Sshock mounts
Smounting parts
Stechnical manual

380 Sieve
2
P/N 7156868A E2010 Nordson Corporation 380 Sieve
Safety Instructions
This manual contains general information on operation and commissioning
of the unit as well as repair and maintenance instructions.
It also provides instructions on safe and reliable operation of the equipment.
This manual is essential to any guarantee claims and must be read and
observed before starting up the equipment.
The following symbols must be observed at all times:
DANGER: This symbol indicates the risk of personal injury.
WARNING: This symbol indicates the risk of property and environmental
damage.

380 Sieve 3
P/N 7156868A
E2010 Nordson Corporation 380 Sieve
Liability and Warranty
The sieving system is intended to be used only to sieve suitable material.
Any other use is considered to be unintended and can result in personal
injury or property damage.
Nordson will not be liable for any damage or consequential damage
resulting from unintended use, failure to observe the manual, interventions
by the purchaser, structural modifications, force, overheating, overload,
exposure to moisture, etc.
Nordson will not be liable for personal injury or property damage caused by
unintended and/or improper handling of the equipment.
Quality Control
Your equipment has been carefully inspected, during and after production.
Upon unpacking, please check the equipment carefully for transport
damage.
Technical Data
Standard
SElectrical connection: 230 V~ 50 or 60 Hz, Pmax < 50W
STotal air consumption (compressed air):
< 0.5 MPa network pressure, < 1 Nm3/h
Permitted:
SResidual oil 0.13 mg/Nm3
SResidual water 1.3 g/Nm3
SCompressed air connection: Pnetwork = 0.6 MPa
SThe capacity varies according to the powder quality, output quantity,
mesh size, etc. (The average capacity of a 500 micrometer sieve, ø 400
mm, is 100 kg/h)
With Option Ultrasonic Sieve
SGenerator: GM 2070−SB
SHF output: 60 W
SHF frequency: 20 kHz homogenous ultrasound wave
SPmax < 50W

380 Sieve
4
P/N 7156868A E2010 Nordson Corporation 380 Sieve
Commissioning
SBefore unpacking and starting up the equipment, read this manual
thoroughly and carefully follow all instructions.
SStore the manual such that it is easily accessibly to operating and
maintenance personnel.
SComply with all company safety instructions as well as applicable
accident prevention and safety regulations.
SOperation and maintenance of the unit may be performed only by
persons who are familiar with this manual and all applicable regulations
regarding occupational safety and accident prevention.
SInstall all electrical and pneumatic components as specified by legal and
local regulations.
SThe sieve should be mounted to a suitable frame.
SDo not smoke near the equipment.
SWear certified respiratory protection, safety goggles and protective
gloves.
SProtect components from damage, wear and inclement weather.
SDo not operate the unit in a damp, flammable or potentially explosive
environment.
SThe unit may only be operated indoors and must be protected from
humidity and moisture.
SThe sieve system may be used only in good condition and with original
components from the manufacturer, and the instructions in the manual
must be followed.
SNever use high−pressure compressed air to remove dust or powder
from skin or clothing. High−pressure compressed air can penetrate the
skin and cause serious injury or death.

380 Sieve 5
P/N 7156868A
E2010 Nordson Corporation 380 Sieve
Preparatory Work
SThe vent hose must be properly screwed onto the powder booth or filter.
SThe system must be grounded.
SThe controller must be secured or placed where it is resistant to sliding.
SWhen it is cleaned, the sieve should be positioned next to or in front of
the powder booth / exhaust system so that dust is suctioned out.
SThe machine includes one sieve.
SWhen different powders are used with the same sieve, differences in
quality may result. The right sieve for each powder should be
determined by trial and error. Consult the powder manufacturer if
necessary.
Maintenance
SMaintenance and inspection conditions must be complied with.
SEnsure that the unit has been disconnected from the power supply
whenever it is opened and/or cleaned.
SWear certified respiratory protection, goggles and protective gloves
when performing maintenance, cleaning the equipment or any other
handling.
SUse only original components from the manufacturer and follow the
instructions for their use in the manual.
SNever use high−pressure compressed air to remove dust or powder
from skin or clothing. High−pressure compressed air can penetrate the
skin and cause serious injury or death.
SDo not smoke near the equipment.
SComply with all company safety instructions as well as applicable
accident prevention and safety regulations.

380 Sieve
6
P/N 7156868A E2010 Nordson Corporation 380 Sieve
Components
1
3
2
4
1. Sieve body
2. Sieve lid
3. Sieve screen
4. Sieve base
1
2
3
4
5
1. Pressure screw
2. Shock mount
3. Vertical tensioner
4. Vibrator motor
5. Support

380 Sieve 7
P/N 7156868A
E2010 Nordson Corporation 380 Sieve
Description of Functions
System Control
The following functions must be controlled:
SSieve controller
Operating Elements
Opening the Machine
WARNING: Do not open the lid during operation! This would cause powder
loss.
WARNING: When fastening the individual parts into place, verify that there
is nothing in between. This could cause damage or injury from pinching and
crushing!
Adapting Sieve Capacity to the Powder to be Sieved
When Using Ultrasonic Sieve
If the ultrasonic settings are too high it can have the reverse effect and not
sieve efficiently. Before beginning work, it is advisable to try out various
settings and then check performance again after a while.

380 Sieve
8
P/N 7156868A E2010 Nordson Corporation 380 Sieve
Aspiration
If using as a standalone unit then the vent hose must be connected to a
suitable location on the booth system. This may sometimes require a vent
assist. (P/N: 736484)
1
1. Vent connection
Operation
WARNING: Ultrasonic sieving, optional:
Continuously purge the ultrasonic transducer with compressed air during
operation. Otherwise there is a risk of overheating and component failure.

380 Sieve 9
P/N 7156868A
E2010 Nordson Corporation 380 Sieve
Changing the Sieve
WARNING: De−energize the system and confirm that no voltage is being
supplied (e.g. separate fuse or main switch). Secure the system from being
switched on again.
If the sieve is changed or it is removed from the machine for cleaning, follow
these steps:
SAllow the system to come to a complete stop
SOptional: Detach the plug from the ultrasonic transducer
SRelease the locks that hold the spacer in place and lift off the top part of
the sieving machine
SCarefully lift out the sieve
SPut the sieve down and (optional) detach the ultrasonic transducer from
the sieve using an open−jawed wrench, size 17.
Reverse the steps to install the sieve again. The optional ultrasonic
transducer must be tightened with the open−jawed wrench.
WARNING: Ultrasonic sieving, optional:
It is imperative when reassembling that the titanium thread on the ultrasonic
transducer and the thread bore in the sieve frame are free of dirt.

380 Sieve
10
P/N 7156868A E2010 Nordson Corporation 380 Sieve
Changing Paint and Cleaning
SSwitch off the system and place a container under the sieving machine
to collect powder residue.
SAfter a brief pause, knock the powder out and into the container.
SRemove the powder by applying compressed air or a vacuum.
SPolish with a soft rag when the powder contains wax.
STo return the system to the initial state, verify that there is no more
powder in the system.
SThen switch on the system again.
DANGER: When using compressed air to clean, ensure there is adequate
exhaust to suction off the powder; otherwise there is a risk of overheating
and component failure.
DANGER: Do not clean under running water −risk of death! Use only a rag
dampened with a permitted cleaning agent. Solvents are not allowed!