Nortel ICS 4.1 User manual

•••••••••••••••••••••••••••••••••••••••••••
•
•
•••••••••••••••••••••••••
Compact ICS 4.1 Programming Record

P0906186 Issue 02 Compact ICS 4.1 Programming Record
Contents
Installed equipment 2
Programming overview (Profiles 1 and 4) 3
Programming overview (Profiles 2 and 3) 6
Installed telephones and other devices 9
Profile 10
Dialpad 10
Startup 10
Terminals&Sets 10
Line Access 10
Capabilities 11
Name 12
User prefernces 12
Button prgrming 13
User speed dial 16
Restrictions 17
Restrn filters 17
Set restrns 19
Line/set restrns 19
Telco features 19
CLASS assignmnt 19
1stDisplay 20
Called ID 20
Log space 20
Lines 21
Trunk/Line Data 21
If Loop, BRI-2, BRI-ST, BRI-U2 or BRI-U4 21
Name 21

ii
Compact ICS 4.1 Programming Record P0906186 Issue 02
Restrictions 21
Telco features 22
Telco features 24
If Target lines 26
Services 29
Ringing service 29
Restriction service 29
Routing service 30
Dest codes 31
Common settings 33
Control sets 33
Schedule names 33
Sys speed dial 34
Passwords 35
COS pswds 35
Call log paswds 36
Progrming pswds 37
IRAD password 37
Hospitality 37
Time&Date 37
System prgrming 38
Hunt groups 38
Change DNs 38
Featr settings 39
Direct-dial 39
CAP assignment 39
Access codes 40
Auto Attendant 40
Auto Attendant greetings 41
Fax DN 41
Remote access 42
Recd # length 42
DN length 42

iii
P0906186 Issue 02 Compact ICS 4.1 Programming Record
National length 43
Make/Break ratio 43
Release reasons 43
Intrnl modem 43
Alarm reporting 43
Hospitality 44
Telco Features 44
VMsg ctr tel#s 44
ONN blocking 44
Software Keys 44
Hardware 45
Cd1-KSU 45
Cd2-KSU 47
Maintenance 52
System version 52
Sys test log 53
Sys Admin Log 54
Template specific defaults 55
Glossary of programming headings and settings 56

iv
Compact ICS 4.1 Programming Record P0906186 Issue 02

Page 1
P0906186 Issue 02 Compact ICS 4.1 Programming Record
All defaults (for the Square template) are shown in bold and underlined text.
Copying set programming
You can use COPY to copy programming from one telephone to another set, a range of sets or all the sets. Depending on where
the display button is pressed, you will copy either all the programming for a telephone or only the programming found under
one of the individual sub-headings.
For general set copying, you can choose what part of the programming will be used. The choices are:
SYSTEM  the system administration programming (system data) of a set
SYSTEM+USER  the system administration programming PLUS the programming for a particular set (user data)
Customer/Company Supplier
Address Customer service representative
Telephone
Telephone
Billing number Installer
System coordinator Installation date
System Data which will be copied
Line access
Line assignment
Answer DNs (unless Answer button DN is same as set being copied to)
Line pool access
Prime line designation
Number of intercom keys
Outgoing line identification (OLI)
Restrictions
Set restrictions
Set Lock
Allow Last Number Redial
Allow Saved Number Redial
Allow Link
Line/set restrictions
Capabilities
Allow Redirect
Call Forward No Answer (DN or Route + destination + delay)
Call Forward Busy (DN or Route + destination)
Priority Calling
Paging
Redirect Ring
Auxiliary Ringer
DND on Busy
Hotline
Handsfree Answerback
Handsfree Setting
Direct-dial (which set is reached by
the D-Dial digit)
Pickup Group
Paging Zone
SLR redirection
ATA settings (except Use ringback
setting)
Telco Features
1stdisplay
Caller ID set (Auto call info)
Call log set (Logging set)
System data which will NOT be copied:
Line access
Private line appearances
Capabilities
Set Name
Use ringback setting under ATA settings
(for I-ATA only)
Telco features
Log password
Log space
CAP assignment
Direct-dial set designation
ExtraDial set designation
Service mode ringing set designation
Prime set designation for a line
Hunt group appearances
User data which will be copied:
Language choice
Ring type
Calls log options (Auto logging)
Display contrast
Dialing options (automatic, predial,
standard)
User data which will be copied if
destination set type is the same as the
source set type:
External autodial button assignments
Internal autodial button assignments
Programmable button assignments
User data which will NOT be copied:
CAP module memory button assignments
Ring volume
User speed dial entries

Page 2
Compact ICS 4.1 Programming Record P0906186 Issue 02
Installed equipment
0x16 ICS Telephones
Quantity Equipment Quantity Equipment
Compact ICS (Integrated Communications System) M7100
Trunk Cartridge, Loop Start M7208
Trunk Cartridge, CI (Call Information) M7310
2-line Basic Rate ST I/F line card (Profiles 2 and 3 only) M7310 with Busy Lamp Field (BLF)
4-line Basic Rate ST I/F line card M7324
2-line Basic Rate U I/F line card (Profiles 1 and 4 only) M7324 with 1 Central Answering Position (CAP)
4-line Basic Rate U I/F line card (Profiles 1 and 4 only) M7324 with 2 Central Answering Positions (CAP)
Expansion Cartridge (8-port, no clocking) International set (Profiles 2, 3 and 4)
Expansion Cartridge with Clocking Single-line telephone
Clocking Cartridge Emergency telephone
Feature Cartridge
Data terminals Auxiliary equipment
Quantity Equipment Quantity Equipment
External paging equipment
External music source
Station auxiliary power supply
Auxiliary ringer
Shoulder rest
CTA 500dm
Headset

Page 3
P0906186 Issue 02 Compact ICS 4.1 Programming Record
Profile PROF 1
Dialpad Q, Z:0
Startup
Template Square
Start DN 21
Terminals&Sets
Show set:_
Line access
Line assignment
Show line:_
L001 Appr&Ring
LinePool access
Line Pool A N
Line Pool B N
Line Pool C N
Prime line None
Intercom keys 2
Answer DNs
Show set:_
21 Unassigned
OLI # None
OLI as calld # N
Capabilities
Fwd no answer
Fwd to None
Forward delay 4
Fwd on busy
Fwd to None
DND on Busy N
Handsfree None
HF answerback Y
Pickup grp None
Page zone 1
Paging Y
D-Dial Set1
Priority Call N
Hotline None
(if Hotline=Extrnl and number
specified) Use prime line
Aux. ringer N
Allow redirect N
Redirect ring Y
ATA settings
ATA ans timer 7
(if DN=I-ATA 3
ATA use Off Site
Name 221
User prefernces
Model M7208
Button prgrming
User speed dial
Call log optns
No one answered
Dialing optns
Standard dial
Language English
Display cntrst 4
Ring type 1
Restrictions
Restrn filters
Show filter:_
Restrn 00
No restrictions
Restrn 01:0
Deny 0
No overrides
Set restrns
Filters
Normal 02
Night 11
Evening 12
Lunch 13
Sched 4 00
Sched 5 00
Sched 6 00
Set lock None
Allow last no Y
Allow saved no Y
Allow link Y
Line/set rstrns
Show line:_
Normal None
Night None
Evening None
Lunch None
Sched 4 None
Sched 5 None
Sched 6 None
Telco features
CLASS assignmnt
Show line:_
Caller ID set N
Call log set N
Extl VMsg set N
1st Display Name
Called ID N
Log space
Log 0Pool 250
Lines
Show line:_
Trunk/Line data
(If Loopstart)
Trunk Type Loop
Line type Public
Dial mode Tone
PrimeSet 21
Auto privacy Y
Trunk mode Unspr
(if Trunk mode=Super)
Ans mode Manual
(if Ans mode=Auto)
Ans with DISA Y
Aux. ringer N
Full AutoHold N
LossPkg MediumCO
(If BRI-ST, BRI-U2 or BRI-U4)
Trunk Type BRI-ST
Line type Public
PrimeSet 21
Auto privacy Y
Ans mode Manual
(if Ans mode=Auto)
Ans with DISA Y
Aux. ringer N
Full AutoHold N
(If Target Line 049-074)
Target line
Line type Public
Recd # None
If busy To prime
PrimeSet 21
Auto privacy Y
Aux. ringer N
Name Line001
Restrictions
Restrn filters
Show filter:
Restrn 00
No restrictions
Restrn 01:0
Deny 0
No overrides
Line restrns
Normal 03
Night 21
Evening 22
Lunch 23
Sched 4 00
Sched 5 00
Sched 6 00
Remote restrns
Normal 04
Night 31
Evening 32
Lunch 33
Sched 4 00
Sched 5 00
Sched 6 00
Telco features
VMsg center 1
Services
Ringing service
Ringing groups
Show group:_
Ring grp 01
Show set:_
21 Assigned
Sched: Night
Service Off
Trunk answer Y
ExtraDial 21
Line settings
Show line:_
Ring grp 01
Aux. ringer N
Sched:Evening
Sched:Lunch
Sched:Sched 4
Sched:Sched 5
Sched:Sched 6
Restrn service
Sched:Night
Service Off
Sched:Evening
Sched:Lunch
Sched:Sched 4
Sched:Sched 5
Sched:Sched 6
Routing service
Routes
Show route:_
Rte 000
DialOut No numbr
Use Pool A
Dest codes
Show DstCode:_
Normal 000
AbsorbLength All
Night None
Evening None
Defaults are shown in bold and underlined
Programming overview (Profiles 1 and 4)

Page 4
Compact ICS 4.1 Programming Record P0906186 Issue 02
Lunch None
Sched 4 None
Sched 5 None
Sched 6 None
Sched:Night
Service Off
Overflow N
Sched:Evening
Sched:Lunch
Sched:Sched 4
Sched:Sched 5
Sched:Sched 6
Common settings
Control sets
For lines
Show line:_
L001 21
For sets
Show set:_
21 21
Schedule names
Sched 1 Night
Sched 2 Evening
Sched 3 Lunch
Sched 4 Sched 4
Sched 5 Sched 5
Sched 6 Sched 6
Schedule times
Monday
Sched:Night
Start time 23:00
Stop time 07:00
Sched:Evening
Start time 17:00
Stop time 23:00
Sched:Lunch
Start time 12:00
Stop time 13:00
Sched:Sched 4
Start time 00:00
Stop time 00:00
Sched:Sched 5
Start time 00:00
Stop time 00:00
Sched:Sched 6
Start time 00:00
Stop time 00:00
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Sys speed dial
Speed dial #:_
01: No number
(if number is programmed)
Use prime line
Display digits Y
(if Display digits=N)
Name Sys Spd Dial 01
Bypass restrn N
Passwords
COS pswds
Show pswd #:_
Pswd 00 None
User flt None
Line flt None
Remote pkg None
Call log pswds
Show set:_
Log pswd None
Progrming pswds
Installer 266344
(CONFIG)
SysCoord+ 727587
(SCPLUS)
Sys coord 23646
(ADMIN)
Basic 22742
(BASIC)
IRAD pswd < Sys ID>
Hospitality
Desk pswd 4677
(HOSP)
Cond pswd None
Time&Date
Hour 01
Minutes 00
Year 99
Month 01
Day 01
System prgrming
Hunt groups
Show group:_
HGnn:<DN>
Member DNs
M001: Appr&Ring
Line assignment
Show line:_
Lnnn: Unassigned
Mode: Broadcast
Hunt delay: 4
If busy: BusyTone
Timeout: 60
Overflow: <DN> or
<hunt group DN>
Name: <7 characters>
Change DNs
Old DN:_
Max. 7 digits
New DN:_
Max. 7 digits
Featr settings
Backgrnd music N
On hold Tones
Receiver volume
Use sys volume
Camp timeout 45
Park timeout 45
Park mode Lowest
Trnsfr callbk 4
DRT to prime Y
DRT delay 4
Held reminder N
(if Held reminder=Y)
Remind delay 60
Directd pickup Y
Page tone Y
Page Timeout 180
Daylight time Y
AutoTime&Date Y
Call log space
Reset all logs?
Space/log
Host delay 1000
Link Time 600
AlarmSet 21
Set relocation N
Anskey: Basic
Direct-dial
D-Dial 1 Intrnl
Intrnl# 21
CAP assignment
CAP1 None
Access codes
Line pool codes
Line pool A None
Line pool B None
Line pool C None
Park prefix 1
Extrnl code 9
Direct-dial 0
Auto DN None
DISA DN None
Auto Attendant
Auto Attend Off
Attd Set 21
Language
First English
Second NONE
System Answer
After 3 rings
Fax Switch Off
CCR
After 3 rings
CCR lines
L001 Answer NO
CCR groups
Show group:_
CCR group 1
Show DN:_
21 Unassgnd
Fax Switch Off
Fax DN None
Remote access
Remote access pkgs
Show pkg:_
LinePool access
Pool A ( ) N
Remote page N
Remote admin N
Remote monitor N
Rem line access
Show line:_
L001 Rem pkg 00
IRAD
Answer line None
After 5 rings
Recd # length 2
DN length 2
Natnl length 10
Release reasons
Text: None
Intrnl modem Fast
(if remote administration is enabled)
Alarm reporting
Auto-report Off
Phone #1 None
Phone #2 None
Use line None
Retry time 15
Num. retries 5