Nova 9036-R User manual

9036-R
Bath Bench with Back and Arms
User Guide
Our mission is to change the
world - every day - every way User Guide and video available online at
www.novamedicalproducts.com
Weight Capacity: 300 lbs.
Customer Help Line: 1-800-557-6682
www.NovaMedicalProducts.com
P.O. Box 3039, Gardena, CA 90247
Warranty Information
Nova extends this warranty only to the original purchaser of this product.
Metal Frame: Limited Lifetime Warranty
Non Metal/Metal parts: 1 Year Warranty (Rubber tips, plastic or metal hardware)
For warranty service, please contact the dealer from whom you purchased your Nova.
To see full warranty details go to www.novamedicalproducts.com

Parts out of the box: (Be sure all parts are included before assembling)
(1) Seat
(4) Legs
(2) Arms
(1) Back
(2) Back Attachment Tubes
(see image 1)
image 1
image 5
image 2
Step 1: Place the seat face down on a level surface. (see image 2)
Step 2: Insert the four leg tubes into the frame. Depress the brass push pin and push the tube in until the
pin fully engages in the frame hole. (see image 3)
Step 3: Turn the chair on its side so that the back receiver tubes are facing upward. (see image 4)
Step 4: Insert the L-shaped back tubes into the backrest tubes until the brass push pin fully engages.
(see image 5)
Step 5: Insert the opposite sides of the L-shaped tubes into the back receiver tubes until the brass push pin
fully engages into the frame hole. (see image 6)
Step 6: Place the chair upright so that it is resting on all four legs and insert the arms into the frame.
Depress both push pins in and push down until the pins fully engage in both frame holes.
(see image 7) Repeat this step for the opposite arm. (Note: Arms should bend back towards the
chair and not away from the chair.)
Step 7: Use the push buttons to adjust the stool to the desired seat height. Be sure the bench is level and
stable before using and that all push buttons are fully engaged.
image 3 image 4
image 6 image 7