NUCANOE CellBlok User manual

CellBlok Adapter Plate
Installation Instructions
#4222
A. Insert track sliders into track and align
with mounting holes.
B. Secure plate to track - with tapered end
towards the bow - using appropriate screws.
Included Hardware:
[2] Track Sliders [2] 3/4” Flat Head Screws [2] 1” Flat Head Screws [6] Fender Washers
[2] 1¾“ Mighty Bolts [2] Mighty Knobs
(a) If mounting to
bow track, use 3/4”
flat head screws and
mount using
outermost holes.
(b) If mounting to
center track, use 1”
flat head screws and mount using center holes. Due to
variations in plastic, 1 - 3 washers may need to be installed
between track and adapter plate.
Mounting Adapter Plate on Flint:
A. Insert track sliders into track and align
with mounting holes.
B. Secure plate to track - with tapered end
towards the bow - using 3/4” flat head screws.
Mount plate to track
using the center
hole on the bow end
of the plate, and the
inner-most hole on
the stern end.
Mounting Adapter Plate on Frontier 12:

C. Install CellBlok (Flint and Frontier 12).
For bow track mount: Insert Mighty Bolts
through slots on adapter plate from the bottom.
Mount the CellBlok onto Mighty Bolts using the
center hole on stern end and outer-most hole on
bow end.
For center track mount (Flint): Insert Mighty
Bolts through slots on adapter plate from the
bottom. Mount the CellBlok onto Mighty Bolts
using the center hole on stern end and bow end.
Stern end: center
hole.
Bow end:
outer-most hole.
CellBlok Adapter Plate
Installation Instructions
#4222