Nuova Simonelli Aurelia II Digit T3 Instruction Manual

LIBRETTO ISTRUZIONI
USER HANDBOOK MANUEL D’INSTRUCTIONS
DIGIT - T3

#  $%% 
 !"!$ $
  !!
: 3-4 (+-,$**(.#$"* 0$13,#$0(21-5,0$1.-,1(!(*(272' 22'$$1.0$11-"-%%$$+ "'(,$(#$,2(%($# 1!$*-5"-+.*($15(2'2'$#(0$"2(4$11.$"(%($#!$*-5 ,#
 +$$212'$$11$,2( *0$/3(0$+$,21(,#(" 2$#(, 22 "'+$,2-,%-0+(27$4 *3 2(-," 2$&-07%-0+'$%-**-5(,&' 0+-,(8$#12 ,# 0#1' 4$!$$, ..*($#
 %-**-5(,&2'$.0-4(1(-,1-%2'$#(0$"2(4$11.$"(%($#!$*-5
: 3-4 (+-,$**(.#<"* 0$1-311 .0-.0$0$1.-,1 !(*(2</3$* + "'(,$.-30" %<$1.0$11-(#$,2(%(<$. 0*$+-#=*$$2*$,3+<0-#$1<0($(,#(/3<1"( .0=1
 $12"-,%-0+$ 36#(0$"2(4$113(4 ,2$1$21 2(1% (2*$1"-,#(2(-,10$/3(1$1$11$,2($**$1"(2<$1# ,1,,$6$<4 *3 2(-,#$"-,%-0+(2<" 2<&-0($
 +-#3*  4<0(%(" 2(-,#$* "-,%-0+(2<;"$1#(0$"24$1 <2<$%%$"23<$$, ..*(/3 ,2*$1,-0+$1' 0+-,(1<$113(4 ,2$1
*% 1"("-*-2$",("-=#$.-1(2 2-.0$11-* 1$#$*$& *$#("3( **9(,#(0(88-13*0$20-(*0$1.-,1 !(*$(," 0(" 2-#$** "-12(238(-,$$&$12(-,$#$*% 1"("-*-2$",("-=*9,&Lauro Fioretti
'$2$"',(" *%(*$' 1!$$,#$.-1(2$# 22'$"-+. ,7'$ #/3 02$01 22'$ ##0$11-,2'$! ")'$.$01-,(,"' 0&$-%"-** 2(,& ,#+ , &(,&2'$2$"',(" *%(*$(10Lauro Fioretti
$#-11($02$"',(/3$$12#<.-1< 3.0=1#31(=&$*<& *#-,2* #0$11$$12(,#(/3< 3#-1*$0$1.-,1 !*$"' 0&<#$* "-,12(232(-,$2#$* &$12(-,#3#-11($02$"',(/3$$12Lauro Fioretti
EC DECLARATION OF CONFORMITY DECLARATION DE CONFORMITE 
DICHIARAZIONE DI CONFORMITÀ CE
Machinery Directive Directive machinesDirettiva macchine
Direttiva ROHS
Regolamento sulle buone pratiche di fabbricazione dei materiali e degli oggetti destinati a venire a contatto con prodotti alimentari
G.U. L384 del22.12.2006, p.75. Guideline about good manufacturing practices of materials and articles destined to come into contact
with foodstuffs – Commission Regulation L384 dated 22/12/2006, page 75. Règlement relatif aux bonnes pratiques de fabrication des
matériaux et des objets destinés à entrer en contact avec des denrées alimentaires Journal Officiel Loi 384 du 22.12.2006, p.75.
Disciplina igienica degli imballaggi, recipienti, utensili, destinati a venire in contatto con le sostanze alimentari o con sostanze d'uso
personale. Hygienic discipline regarding packaging, containers and utensils that are destined to come into contact with food
substances or with substances of personal use. Discipline hygiénique des emballages, récipients, ustensiles, destinés à entrer en
contact avec des denrées alimentaires ou avec des substances d’usage personnel.
(CE) No 2023/2006
D. M. 21/03/1973
10/2011/CEE
ROHS Directive Directive ROHS
direttiva materie plastiche plastics directive matériau plastique directive
85/572/CEE, 82/71/CEE direttive metalli e leghe metals and alloys directives métaux et alliages directives / directiva metales y aleaciones
Low Voltage Directive Directive basse tensionDirettiva bassa tensione
Directive for Materials and Articles intended to come into contact with foodstuffs
Directive matériaux pour contact alimentaire
Direttiva materiali per alimenti
Electromagnetic Compatibility Directive
Directive compatibilité électromagnétique
Direttiva compatibilità elettromagnetica
Pressurized Equipment Directive Directive équipements sous pression Direttiva attrezzature a pressione

Norme applicate: Raccolte M,S, VSR edizione '78 e '95 conservate presso la sede legale.
Applied regulations: Collections M,S, VSR editions '78 and '95 and available in the registered office.
Normes appliquées: Recalte M, S, VSR edition '78 et '95 gardées chez la siège legale.
Disegno n° *"' *##+
Amministratore delegato *"$ "*#$"$%",,%,Ottavi Nando
EC DECLARATION OF CONFORMITY PRESSURE EQUIPMENT DECLARATION DE CONFORMITE MACHINE SOUS PRESSION
DICHIARAZIONE DI CONFORMITÀ CE ATTREZZATURA A PRESSIONE
ATTENZIONE: La presente dichiarazione va conservata e deve accompagnare sempre l'attrezzatura. Ogni uso dell'attrezzatura diverso da quello previsto dal
progetto é vietato. L'integrità e l'efficienza dell'attrezzatura e degli accessori di sicurezza sono a cura dell'utente. La presente dichiarazione perde la sua validità nel
caso in cui l’apparecchio venga modificato senza espressa autorizzazione del costruttore oppure se installato o utilizzato in modo non conforme a quanto indicato
nel manuale d’uso e nelle istruzioni.
ATTENTION: This declaration is to be kept with the equipment at all times and must always go together with the equipment. Any use of the equipment than for
the purposes for which it was designed is prohibited. The integrity and efficiency of the equipment of the safety devices are the responsibility of the user. The
declaration is null and void if the machine is modified without the express authorization of the manufacturer or if improperly installed and used in such a way that
does not comply with indications in the user’s manual and the instructions.
ATTENTION: Cette déclaration doit être conservée et doit toujours aller avec la machine. Toute utilisation de la machine différente de celle qui este prévue par le
projet est interdite. L'intégrité et l'efficacité de la machine et des accessoires de sécurité sont à la charge de l'utilisateur. La présente déclaration perd toute validité
dans le cas où l'appareil est modifié sans l'autorisation du constructeur ou si l'appareil est installé ou utilisé de façon non conforme à ce qui est indiqué dans le
manuel et dans le mode d'emploi.
* Boiler in zona di applicazione articolo 3, comma 3 97/23/CE * Boiler in application area, article 3, section 3 97/23/EC
* Chauffe-eau en zone d’application article 3, alinéa 3 97/23/CE
Caldaia1'#$)1",#4)e:

37
ENGLISH
Congratulations,
By purchasing the you have made an excellent choice.
The purchase of a professional espresso coffee-maker involves various elements of selection: the name of the manufacturing firm, the machine’s
specific functions, its technical reliability, the option of immediate and suitable servicing, its price. You certainly evaluated all these factors and then
made your choice: the .
We think you have made the best choice and after every coffee and cappuccino you will be able to assess this.
You will see how practical, convenient and efficient working with con .
If this is the first time you have bought a Nuova Simonelli coffee machine, welcome to high quality coffee-making; if you are already a customer of ours,
we feel flattered by the trust you have shown us.
Thanks of the preference.
With best wishes,
Nuova Simonelli S.p.A.

38
ENGLISH
C
TECHNICAL CHARACTERISTICS
D
H
A
B
2 Groups 3 Groups
NET WEIGHT 76 kg 168 lb 90 kg 198 lb
GROS WEIGHT 82 kg 181 lb 102 kg 225 lb
POWER 7300 W 7300 W 9100 W 9100 W
DIMENSIONS A815 mm A32 1\16” A1045mm A411\8”
B720 mm B28 5/16” B950 mm B37 3/8”
C565mm C223\16” C565 mm C223\16”
D370mm D149\16” D370 mm D149\16”
H
565 mm
H
22 3/16”
H
565 mm
H
22 3/16”
2 Groups 3 Groups 4 Groups
NET WEIGHT 74 kg 164 lb 88 kg 194 lb 102 kg 225 lb
GROS WEIGHT 80 kg 176 lb 100 kg 220 lb 115 kg 254 lb
POWER 4500 W 4500 W 5000 W 5000 W 5000 W 5000 W
DIMENSIONS A815 mm A32 1\16” A1045mm A411\8” A1275 mm A50 3\16”
B720 mm B28 5/16” B950 mm B37 3/8” B1180 mm B46 7\16”
C565mm C223\16” C565 mm C223\16” C565 mm C223\16”
D370mm D149\16” D370 mm D149\16” D370mm D149\16”
H
565 mm
H
22 3/16”
H
565 mm
H
22 3/16”
H
565 mm
H
22 3/16”
T3 Version
Digit Version

39
ENGLISH
INDEX
TECHNICAL CHARACTERISTICS .......38
1. DESCRIPTION ..........41
1.1 CONTROL PANEL DESCRIPTION .............. 42
1.2 ACCESSORIES LIST......................... 43
2. SAFETY PRESCRIPTION ..............44
3. TRANSPORT AND HANDLING ..........47
3.1 MACHINE IDENTIFICATION ................... 47
3.2 TRANSPORT ............................... 47
3.3 HANDLING................................. 47
4. INSTALLATION AND
PRELIMINARY OPERATIONS ...........47
4.1 WATER SPECIFICATIONS .................... 48
4.2 ELECTRICITY SPECIFICATIONS ............... 48
5. ADJUSTMENTS TO BE MADE
BY A QUALIFIED TECHNICIAN ONLY ....49
5.1 ADJUSTMENTS TO BE MADE
BY A QUALIFIED TECHNICIAN ONLY........... 49
5.2 PRESSURE SWITCH (version S and V) / PUMP
(version S, V, Digit and T3) ADJUSTMENT....... 49
5.3 HOT WATER ECONOMISER ADJUSTMENT ...... 49
6. USE ................................50
6.1 COMMISSIONING PROCEDURE OR
AFTER BOILER MAINTENANCE (T3 VERSION)... 50
6.2 TURNING THE MACHINE ON.................. 50
6.3 MAKING COFFEE ........................... 51
6.4 USING STEAM (Manual steam wand) ........... 52
6.5 MAKING CAPPUCCINO ...................... 52
6.6 HOT WATER SELECTION..................... 52
6.7 AUTOSTEAM (optional) ...................... 52
7. AURELIA T3 and DIGIT PROGRAMMING ..53
7.1 KEY....................................... 53
7.2 PROGRAMMING (user mode) ................. 53
7.2.1 LANGUAGE ................................ 54
7.2.2 DOSE PROGRAMMING....................... 54
7.2.3 SET POINT TEMPERATURE................... 56
7.2.4 KEY AND DISPLAY SETTINGS................. 58
7.2.5 ENERGY SAVING ........................... 60
7.2.6 DELIVERY COUNT .......................... 62
7.2.7 ALARMS................................... 63
7.2.8 TECHNICAL SETTINGS ...................... 64
8. CLEANING ..........................66
8.1 SWITCHING OFF THE MACHINE .............. 66
8.2
CLEANING THE OUTSIDE OF THE MACHINE ..... 66
8.3
CLEANING THE STAINLESS COFFEE-HOLDERS .. 66
8.4
CLEANING THE UNIT WITH
THE AID OF THE BLIND FILTER ............... 66
8.5
CLEANING FILTERS AND FILTER-HOLDERS ...... 66
9. MAINTENANCE ......................67
9.1 RESIN AND SOFTENER REGENERATION ....... 67
AURELIA II DIGIT T3 V ELECTRIC SYSTEM ....101
AURELIA II DIGIT T3 S ELECTRIC SYSTEM ....102
AURELIA II DIGIT V ELECTRIC SYSTEM .......103
AURELIA II DIGIT BOILER DIAGRAM..........104
AURELIA II T3 (3 groups) BOILER DIAGRAM ...105
AURELIA II T3 (2 groups) BOILER DIAGRAM ...106
AURELIA II T3 (2-3 groups) BOILER DIAGRAM . .107

40
ENGLISH

41
ENGLISH
Fig. 1
KEY
1Steam knob
2Hot water / steam delivery button
3Control panel
4Coffee delivery buttons
5Steam knob
6Filter-holder
7Manual steam nozzle
8Delivery unit
9Main switch
10 2 coffees spout
11 Water level inside boiler
12 Pressure Gauge
13 Adjustable foot
14 Manual steam nozzle
15 Data plate
16 Hot water nozzle
17 Electric cup warmer (optional)
1. DESCRIPTION
12 11
15
6
5
7
9 810
4
32
16
14
17
1
13

42
ENGLISH
1.2 bar Menu
3
21 MarchSunday 14:45
°C
°C °C°C
KEY
1Machine On/Off light
2Machine On/Off button
3TFT display
4Aurelia II Logo
5USB port
6Logo (T3 version)
7Rotary switch
8Cup warmer On/Off button
9Cup warmer On/Off button
10 Wash light
11 Cup warmer On/Off light
1.1 CONTROL PANEL DESCRIPTION
Fig. 2
12 3 4 5
6
78
9
1011

43
ENGLISH
Fig. 3
1.2 ACCESSORIES LIST
A11
A06
A07
A03
A02
A01
A05
A08
A04
A09
A10
CODE DESCRIPTION 2 GROUPS 3 GROUPS 4 GROUPS
(Digit only)
A01 Filling tube 3/8 1 1 1
A02 Unit tub draining tube
Ø 20 mm - l. 150 cm 111
A03 Worktop draining
tube Ø 25 mm -
l. 150 cm 111
A04 Filter-holder 3 4 5
A05 Double filte 234
A06 Single filter 1 1 1
A07 Blind filter 1 1 1
A08 Spring 3 4 5
A09 Double delivery spout 2 3 4
A10 Single delivery spout 1 1 1
A11 Coffee presser 1 1 1

44
ENGLISH
This book is an integral and essential
part of the product and must be given
to the user.
Read this book carefully. It provides
important information concerning
safety of installation, use and mainte-
nance.
Save it carefully for future reference.
After unpacking, make sure the appli-
ance is complete.
In case of doubts, do not use the
appliance, but consult a qualified
technician.
Packaging items which are potential-
ly dangerous (plastic bags, polysty-
rene foam, nails, etc.) must be kept
out of children’s reach and must not
be disposed of in the environment.
The illustrations in this manual are
purely for information purposes.
Your machine may differ slightly from
the one shown here.
Nuova Simonelli reserves the right to
make any changes to products and
the manual without the need for any
updates to previous products and
manuals.
☞
☞
DANGER OF POLLUTION
Before connecting the appliance
make sure the rating plate data cor-
respond with the mains.
This plate is on the front panel at the
top right hand side of the appliance.
The appliance must be installed by
qualified technicians in accordance
with current standards and manufac-
turer’s instructions.
The manufacturer is not liable for any
damage caused due to failure to
ground the system.
For the electrical safety of the appli-
ance, it is necessary to equip the
system with the proper grounding.
This must be carried out by a quali-
fied electrician who must ensure that
the electric power of the system is
sufficient to absorb the maximum
power input stated on the plate.
☞
In particular you must ensure that the
size of the wiring cables is sufficient
to absorb power input.
The use of adapters, multiple sockets
or extensions is strictly forbidden. If
they prove necessary, call a fully
qualified electrician.
☞
When installing the device, it is nec-
essary to use the parts and materials
supplied with the device itself.
Should it be necessary to use other
parts, the installation engineer needs
to check their suitability for use in
contact with water for human con-
sumption.
☞
Fig. 4
Fig. 5
2. SAFETY PRESCRIPTION
For appliances powered at 220-230 V,
the maximum impedance from the
mains must be no higher than 0.37
Ohm.
☞
☞

45
ENGLISH
This appliance must only be used as
described in this handbook. The
manufacturer shall not be liable for
any damage caused due to improper,
incorrect and unreasonable use.
This appliance is not suitable for use
by children or persons with reduced
physical, sensory or mental capabili-
ties, or by persons with a lack of
experience or knowledge, unless
supervised or given instructions.
☞
The machine must be installed in
compliance with the local health
standards in force for plumbing sys-
tems.
Therefore, contact an authorized
plumber.
☞
The device needs to be supplied with
water that is suitable for human con-
sumption and compliant with the
regulations in force in the place of
installation. The installation engineer
needs confirmation from the owner/
manager of the system that the water
complies with the requirements and
standards stated above.
☞
☞
Before carrying out any maintenance
operation, the authorised service
engineer will switch off the machine
and open the disconnector.
☞
For all cleaning operations comply
exclusively with the instructions
given in this booklet.
☞
If the appliance breaks down or fails
to work properly, switch it off. Any
intervention is strictly forbidden.
Repairs should only be made by the
manufacturer or authorized vice cen-
tres.
Only original spare parts must be
used.
Failure to observe the above, could
make the appliance unsafe.
☞
For installation, the qualified electri-
cian must fit an omnipolar switch in
accordance with the safety regula-
tions in force and with 3 (0,12) or
more mm (in) between contacts.
☞
Fig. 6
During installation, the mains power
system needs to be equipped with a
disconnector switch to cut off each
phase.
☞
Basic rules must be observed when
using any electric appliance.
In particular:
do not touch the appliance when
hands or feet are wet;
do not use the appliance when
barefoot;
do not use the appliance when
barefoot;
do not pull the supply cord out of
the socket to disconnect it from
the mains;
do not leave the appliance
exposed to atmospheric agents
(rain, sun, etc.);
do not let the appliance be used
by children, unauthorised staff or
staff who have not read and fully
understood the contents of this
handbook.
☞
The maximum and minimum storage
temperatures must fall within a range
of [-5, +50]°C.
☞
The operating temperature must be
within the range of [+5, +35]°C.
☞
At the end of installation, the device is
switched on and taken to rated operat-
ing conditions, leaving it in a state in
which it is “ready for operation”.
The device is then switched off and
the whole hydraulic circuit is bled of
the first lot of water in order to
remove any initial impurities.
☞
CAUTION
RISK OF ELECTRIC SHOCK
The device is then refilled and taken
to rated operating conditions
.
After reaching the “ready for operation”
condition, the following dispensing
operations are carried out:
- 100% of the coffee circuit through the
coffee dispenser (for more than one
dispenser, this is divided equally);
- 100% of the hot water circuit through
the water dispenser (for more than one
dispenser, this is divided equally);
- openi
n g of each steam outlet for 1
minute;
At the end of installation, it is good
practice to draw up a report of the
operations.

46
ENGLISH
CAUTION
RISK OF POLLUTION
Do not dispose of the machine in the
environment; for the disposal, con-
tact an authorized service center or
contact the manufacturer for indica-
tions.
☞
CAUTION
RISK OF POLLUTION
Use the steam nozzle with care and
never place hands below the jet of
steam. Do not touch the nozzle imme-
diately after us.
☞
CAUTION
RISK OF INTOXICATION
We remind you that before carrying
out any installation, maintenance,
unloading or adjustment operations,
the qualified operator must put on
work gloves and protective footwear.
☞
If no longer using the appliance, we
recommend making it inoperative;
after removing the plug from the
mains electricity, cut the power sup-
ply cable.
☞
Fig. 7
Fig. 8
INFORMATION TO THE USERS
Under the senses of art. 13 of
Law Decree 25th July 2005, n.
151 “Implementation of the
Directives/ Guidelines 2002/95/
CE, 2002/96/CE and 2003/108/
CE, concerning the reduction
of the use of dangerous substances in electric
and electronic equipment, as well as the dis-
posal of wastes“.
Thesymbolofthecrossedlargerubbishcontainer
that is present on the machine points out that the
product at the end of its life cycle must
Be collected separately from the other wastes.
The user for this reason will have to give the
equipment that got to its life cycle to the suitable
separate waste collection centres of electronic
and electrotechnical wastes, or to give it back to
the selleror dealer whenbuying a newequipment
of equivalent type, in terms of one to one. The
suitableseparatewastecollectionforthefollowing
sendingofthedisusedequipmenttorecycling,the
dealing or handling and compatible environment
disposal contributes to avoid possible negative
effects on the environment and on the people's
health and helps the recycling of the materials the
machine is composed of. The user's illegal dis-
posal of the product implies the application of
administrative fines as stated in Law Decree
n.22/1997” (article 50 and followings of the Law
Decree n.22/1997).
CAUTION
The maximum noise disturbance
level is lower than 70db.
☞
If the pipe connecting to the mains
water is replaced the old pipe must
never be re-used.
☞
To avoid dangerous overheating,
make sure the supply cord is fully
uncoiled.
☞
Do not obstruct the extraction and/or
dissipator grids, especially of the
cup warmer.
☞
The user must not replace the appli-
ance supply cord. If the cord is dam-
aged, switch off the appliance and
have a qualified technician change
the cord.
☞
Single-phase appliances with current
above 15 A and three-phase appli-
ances sold without plugs are directly
wired to the mains power and there-
fore, it is not possible to use a plug.
☞

47
ENGLISH
After unpacking, assess that the machine and
its accessories unit are complete, then proceed
as follows:
SODFHWKHPDFKLQHVRWKDWLWLVOHYHORQDIODW
surface;
DVVHPEOHLWVVXSSRUWLQJIHHWE\LQVHUWLQJWKH
insert into the cylindrical unit;
WZLVW WKH UXEEHU IRRW LQWR WKH VFUHZ WKUHDG
inside the unit;
VFUHZ WKH ZKROH DVVHPEOHG XQLW LQWR WKH
allotted setting for the machine’s adjustable
feet;
OHYHOWKHPDFKLQHE\UHJXODWLQJWKHDGMXVWD-
ble feet;
NOTE: the unit grooves have to face upwards,
as shown in the following illustration.
It is advisable to install a softener (1) and then
a mesh filter (2) on the external part of the
plumbingsystem,duringpreliminariesandafter
levelling the machine.
Fig. 10
4. INSTALLATION
AND
PRELIMINARY
OPERATIONS
Always quote the machine serial number in all
communications to the manufacturer, Nuova
Simonelli
.
The machine is transported on pallets which
also contain other machines - all boxed and
secured to the pallet with supports.
Before carrying out any transport or handling
operation, the operator must:
SXWRQZRUNJORYHVDQGSURWHFWLYHIRRWZHDU
as well as a set of overalls which must be
elasticated at the wrists and ankles.
The pallet must be transported using a suit-
able means for lifting (e.g., forklift).
During all handling operations, the operator
must ensure that there are no persons,
objects or property in the handling area.
The pallet must be slowly raised to a height
of 30 cm (11,8 in) and moved to the loading
area. After first ensuring that there are no
persons, objects or property, loading opera-
tions can be carried out.
Upon arrival at the destination and after
ensuring that there are no persons, objects
or property in the unloading area, the prop-
er lifting equipment (e.g. forklift) should be
used to lower the pallet to the ground and
then to move it (at approx. 30 cm (11,8 in)
from ground level), to the storage area.
Before carrying out the following operation,
the load must be checked to ensure that it is
in the correct position and that, when the
supports are cut, it will not fall.
The operator, who must first put on work
gloves and protective footwear, will proceed
to cut the supports and to storing the prod-
uct. To carry out this operation, the techni-
cal characteristics of the product must be
consulted in order to know the weight of the
machine and to store it accordingly.
3. TRANSPORT AND HANDLING
3.1 MACHINE
IDENTIFICATION
3.2 TRANSPORT
3.3 HANDLING
Fig. 9
CAUTION
RISK OF IMPACT
OR CRASHING
CAUTION
RISK OF IMPACT
OR CRASHING

48
ENGLISH
Fig. 11
KEY
1Softene
2Mesh filter
3Drain Ø 50 mm
CAUTION
RISK OF SHORT CIRCUITS
Priortoconnectingthemachineto the electrical
mains, assess that the voltage shown on the
machine’s data plate corresponds with that of
the mains.
If it does not, carry out the connections on the
basis of the available electrical line, as follows:
IRUV 380 / 3 phases voltage + Neutral:
Fig. 12
Fig. 13
KEY
1Black
2Grey
3Brown
The machine must always be protected by
an automatic omnipolar switch of suitable
power with contact openings of equal dis-
tance or more than 3mm.
Nuova Simonelli is not liable for any dam-
age to people or objects due to not observ-
ing current security measures.
Avoid throttling in the connecting tubes.
Assess that the drain pipe (3) is able to
eliminate waste.
WARNING
2
3
1
IRUV 230 / monophase voltage
4 Blue
5 Yellow-green
In this way impurities like sand, particles of
calcium, rust etc will not damage the delicate
graphite surfaces and durability will be guaran-
teed.
Followingthese operations, connect the plumb-
ingsystemsas illustratedinthefollowingfigure.
NOTE: At the start of the day’s activities and in
any case, if there are any pauses of
more than 8 hours, then it is necessary
to change 100% of the water in the cir-
cuits, using the relevant dispensers.
NOTE: In case of use where service is continu-
ous, make the above changes at least
once a week.
Monitoring of water recipe to keep it within
required levels and maintenance of filtration
system is the user's responsibility.
Failing to meet and maintain water at the follow-
ing levels will void the entire warranty:
WRWDOKDUGQHVVSSPSDUWVSHUPLOOLRQ
water line pressure between 2 – 4bar and
water to be cold
4.1 WATE SPECIFICATIONS
PLQIORZUDWHOKU
ILOWUDWLRQOHYHOEHORZPLFURQ
WGVWRWDOGLVVROYHGVROLGVOHYHOEHWZHHQ
– 250 ppm
alkalinity level between 10 – 150 ppm
FKORULQHOHYHOOHVVWKDQPJO
3KOHYHOEHWZHHQDQG
4.2 ELECTRICITY
SPECIFICATIONS

49
ENGLISH
NOTE: this operation can be carried out while
the machine is turned on.
All models are fitted with a hot
water mixer, which serves to adjust the tem-
perature of the water leaving the wand and to
optimise system performance.
To set the hot water economy device, use a
screwdriver on the screw in the top part of the
machine, as shown in the figure.
7XUQLW&/2&.:,6($17,&/2&.:,6(WR
REDUCE / INCREASE the temperature of
the hot water;
Fig. 15
5.2 PRESSURE SWITCH
(version S and V) /
PUMP (version S, V,
Digit and T3)
ADJUSTMENT
5. ADJUSTMENTS TO BE MADE BY A QUALIFIED TECHNICIAN ONLY
NOTE: this operation must be carried out with
the machine turned off.
All models are equipped with a
level gauge to keep the water level inside the
boiler constant. When using the machine for
the first time, it is advisable to fill the boiler by
hand to avoid damaging the electrical resistor
and turning on the electronic protection.
If this should happen, just turn the machine off
and then start it up again to complete its load-
ing procedure (see “MACHINE OPERATION
MESSAGES”).
To fill the boiler manually for the first time, pro-
ceed as follows
UHPRYHWKHZRUNWRSJULG
XVHWKHPDQXDOOHYHOFRFN³$´WRDOORZZDWHU
to enter the boiler;
RQFHWKHPD[LPXPOHYHOKDVEHHQUHDFKHG
as indicated by the optical level, turn tap “A”
off;
VZLWFKWKHPDFKLQHRQE\SODFLQJWKHJHQ-
eral switch on “I”; this will activate the level
gauge which will automatically maintain the
water level inside the boiler.
5.1 ADJUSTMENTS TO
BE MADE BY A
QUALIFIED
TECHNICIAN ONLY
Fig. 14
AMAX
MIN
5.3 HOT WATER
ECONOMISER
ADJUSTMENT
The electronic control unit has a lithium battery
to power the clock; the battery has an autono-
my of about three years, after which it will need
to be replaced.
In case of an extended period of machine stop-
page, the clock can be stopped:
ZLWKWKHPDFKLQHRIIWKHGLVSOD\ZLOOUHDG
KROGWKH212))NH\GRZQ for 5 sec.
to release the clock.
Replacement of the lithium battery must be
carried out EXCLUSIVELY by Qualified
Technician.
Nuova Simonelli cannot be held liable for
any damage to people or things due to non
observance of the safety prescriptions
described in this booklet.
WARNING
OFF
CLOCK DISABLED
®

50
ENGLISH
Beforestartingtousethe appliance,theoperator
must be sure to have read and understood the
safety prescriptions contained in this booklet.
When commissioning the machine for the first
time or after carrying maintenance switch ON
the machine using the main switch positioned
lower down and on the right and proceed as
follows:
 ,I WKH PHVVDJH ³2)) ± &/2&.
DISENABLED” appears on the display pro-
ceed as follows in step three.
2) If the display reads “OFF“ press the ON/
OFF NH\XQWLOLWUHDGV³2))±&/2&.
DISABLED“andthenproceedas described
in step 3.
3) Switch on the machine using the ON/OFF
key and automatically after the
machine has switched on, some water will
be poured from the groups for about 45
seconds to make sure that the coffee boiler
tanks have been properly filled.
This cycle cannot and must not be inter-
rupted.
If this cycle is interrupted due to a power
outage or if the machine is accidentally
switched off from the main switch, the next
time the machine is switched on, the cycle
will be started again for approximately 45
seconds more.
6.2 TURNING THE
MACHINE ON
SWITCH ON: plug the machine into the
power socket and press the
switch “A” so it is in position “I”;
the machine will switch on.
Pressing the switches “B” and
"C"inthe “I” position will switch
on the LEDs, independently of
the position of switch "A".
The lit display will show the firmware version
for about 1 second:
For electronic card maintenance, turn the
machine off by means of the external main
switch or disconnect the plug.
WARNING
MANUAL SWITCHING ON/OFF
Automatic On/Off NOT PROGRAMMED
NOTE: make sure that the general switch is
always on the position “I”.
6. USE
SWITCH ON: press the On/Off button
for about 2 seconds until the
lightswitchesonandthebuzz-
er makes a beep sound.
The control unit will start up an
auto diagnosis cycle to check
the functions, all the selection
keys will light up.
6.1 COMMISSIONING
PROCEDURE OR
AFTER BOILER
MAINTENANCE
(T3 VERSION)
ABC
Fig. 16
If the self-diagnostics report anomalies or
failures, the operator MUST NOT intervene.
Please contact the Assistance Centre.
WARNING
NOTE: The machine is not operational, since
the main switch only powers the elec-
tronic card.
Release firmware 0.37.1
®
7KHGLVSOD\ZKLFKLVQRWLOOXPLQDWHGZLOOUHDG
OFF
®

51
ENGLISH
Automatic On/Off PROGRAMMED
NOTE: make sure that the general switch is
always on the position "I".
The machine will SWITCH OFF at the first
time set for stopping the coffee maker (see
the PROGRAMMING chapter and the
ENERGY SAVING section).
The control unit will perform an auto diagnosis
of all functions and all of the selection keys will
light up.
After the diagnostics stage, the "Home Page"
will open on the screen:
If the self-diagnostics report anomalies or
failures, the operator MUST NOT intervene.
Please contact the Assistance Centre.
WARNING
In case the auto diagnosis indicates error or
malfunction, call an assistance centre; the
operator MUST NOT intervene.
WARNING
SWITCHING OFF: press the ON/OFF button
for about 2 seconds, until the
light switches off.
The machine will switch off and
the display will read:
OFF
®
0.05 bar Menu
21 MarchSunday 14:45
°C°C °C
NOTE: once the auto diagnosis has been com-
pleted all the keys are activated.
The machine will SWITCH ON at the first
programmed switch-on time (see the
PROGRAMMING chapter and the ENERGY
SAVING section).
NOTE: the machine can be switched on or off
manually as indicated in the previous
paragraphe.
6.3 MAKING COFFEE
Unhitch the filter-holder and fill it with one or
two doses of ground coffee depending on the
filter used.
Fig. 17
Press the coffee with the provided coffee
presser, dustoffany coffeeresiduefromthe rim
of the filter (this way the rubber gasket will last
longer).
Insert the filter in its unit.
Press the desired coffee button.
NOTE: when in pause, leave the filter-holder
inserted in the unit so that it will keep
warm.
To guarantee the utmost thermic stabil-
ity during use, the delivery units are
thermo-compensatedwithcomplete hot
water circulation.
0.05 bar Menu
21 MarchSunday 14:45
°C°C °C
After the diagnostics stage, the
"Home Page" will open on the
screen:
NOTE: on completion of the check up all the
selection keys are activated.

52
ENGLISH
6.5 MAKING
CAPPUCCINO
Toobtainthetypical cappuccinofoam,immerse
the nozzle all the way into a container 1/3 full of
milk (preferably cone-shaped). Turn on the
steam. Before the milk starts to boil, pull the
nozzle slightly up and lightly move it vertically
across the surface of the milk. When you have
completed the procedure, clean the nozzle
carefully with a soft cloth.
Fig. 19
CAUTION
RISK OF BURNS OR SCALDING
To use the steam function, pull or push the rel-
evant lever, as shown in the figure.
By pulling it completely the lever will hold a
positionofmaximum delivery; by pushing it, the
lever will automatically give way.
The two steam nozzles are articulated to guar-
antee their easy use.
6.4 USING STEAM
(Manual steam
wand)
Fig. 18
While using the steam nozzle, you must pay
attention to not place your hands beneath it
or touch just after it has been used.
NOTE: Before using the steam wand, always
bleed out any condensation for at least
2secondsoraccordingtothemanufac-
turer’s instructions.
6.6 HOT WATER
SELECTION
CAUTION
RISK OF BURNS OR SCALDING
While using the hot water nozzle, pay care-
ful attention not to place your hands beneath
it or touch it just after it has been used.
This nozzle delivers hot water to make tea or
herb teas.
Place a suitable container under the hot water
nozzle. Press the hot water select button once;
the light will switch on.
6.7 AUTOSTEAM
(optional)
This serves to deliver steam and the tempera-
tureis controlled by a probe. The temperature is
set during the programming stage.
To enable autosteam, press the steam button
; the light will switch on.
The steam delivery will stop as soon as the set
temperature for the liquid is reached.
NOTE: Steam can be delivered at the same
time as coffee.
CAUTION
RISK OF BURNS OR SCALDING
When using autosteam, take great care not
to place your hands underneath it and never
touch it immediately afterwards.
The hot water wand will deliver water for the
amount of time equivalent to the set value (see
PROGRAMMING section and the DOSE
PROGRAMMING section) or press the button
again to stop pouring.
NOTE: Hot water can be delivered at the same
time as coffee.