NXP Semiconductors TWR-PROTO User manual

TOWER SYSTEMQuick Start Guide for TWR-PROTO
Prototyping Module
Quick Start Guide

How to build your Tower
1. Press the card edge connector of each Tower
module into a slot on the elevator—take care
to match all the primary card edges and plug
them into a functional elevator. A module may be
placed into any slot on the elevator.
2. Press another elevator board onto the
secondary card edges.
TWR-PROTO features
• Accesstoallsignalsonprimaryandsecondary
elevator connectors for prototyping and
signal probing
• Prototypingareaforaddingcustomcircuitryto
Tower System
• Multiple5V,3.3VandGNDconnections
Freescale and the Freescale logo are trademarks or registered
trademarksofFreescaleSemiconductor,Inc.intheU.S.andother
countries. All other product or service names are the property of
theirrespectiveowners.©FreescaleSemiconductor,Inc.2009.
DocNumber:TWRPROTOQSG/REV0
AgileNumber:926-26187/REVA
Learn more at www.freescale.com/tower
TOWER SYSTEM