NXP Semiconductors KIT33816FRDMEVM User manual

External Use
TM
Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.
All other product or service names are the property of their respective owners. © 2014 Freescale Semiconductor, Inc.
QuickStartGuideforthe
KIT33816FRDMEVM
N o v . 1 3 . 2 0 1 4
Rev.2.0

TM
External Use 1
Agenda
•Getting to Know the KIT33816FRDMEVM
•Getting Started Out of the Box
•MC33816 Development tools
•Explore Further

TM
External Use 2
Getting to Know the KIT33816FRDMEVM
USB
VBAT

TM
External Use 3
Getting to Know the KIT33816FRDMEVM
•MC33816 direct injection pre-driver integrated circuit
•USB-to-SPI dongle interface using the FRDM-KL25Z
•External MOSFETs controlling 4 injectors and 2 fuel pumps
•Power-conditioning circuitry
•+12 V VSUPP provides the power to the MC33816 and the loads

TM
External Use 4
Getting Started Out of the Box
•Installing and Running the Out of the Box Demo
Download and Install SPIGEN 7.x from http://www.freescale.com/SPIGEN
Plug in a USB cable from a USB host to the KL25Z_USB. The FRDM-KL25Z
will be powered by this USB connection.
Run SPIGEN 7.1 (or latest). LED on KL25Z turns blue
Connect 14 V / 2.0 A power supply to VBAT connector
Download and unzip KIT33816-SPIGEN.spi and
KIT33816FRDM-SBCH.zip
1
2
3
4
5
KL25Z_USB

TM
External Use 5
Getting Started Out of the Box
•Program MC33816 with SPIGEN 7.x
1
2
3
1
2
3
4
5
4
5
Click on Load Filenames and select the
SPIGen33816Files.txt file from the KIT33816SW
Click on Download All, a pop up Download
complete window appears.
Go to tab “Batch Command” and send Startx High and Low control signal to turn the injectors On/Off
Click on Enable Flash on CH1 and CH2
Click on Open and load the configuration file
KIT33816AESW_Rev2.0.spi
Select Micro Code from left tab
Set RSTB and DRVEN to High
7
6
7
6

TM
External Use 6
MC33816 Development Tools
•Edit and compile source code
•Create register configurations
•Generate C files arrays*
•SPI software to
control MC33816
•Download all
configuration,
DRAM, CRAM
•Generate Start file
command
•4 cylinders + Fuel Pump control
•DCDC control
•USB/SPI interface (KL25Z)
•1MHz CLK
•Pi Filter
MC33816 IDE
PSC Simulator
•Edit, compile, and debug
source code
•Supports single step code
execution, breakpoints without
the need for hardware
•Provides graphical output of
digital and analog (load)
waveforms
SPIGEN KL25Z MC33816
KIT33816FRDMEVM
USB SPI
.bin
Files
.bin
Files
* Dedicated for MCU coding
OR

TM
External Use 7
Explore Further
Now that you are familiar with the KIT33816FRDMEVM and
SPIGEN, it’s time to explore the additional software and user guide
available on www.freescale.com . Select your next path from the
links in the Jump Start Your Design section.

TM
External Use 8
Revision History
Revision
Date
Description of Changes
1.0
10/2014
•Initial release
2.0
11/2014
•Updated the filename in step 5 on page 4

TM
© 2014 Freescale Semiconductor, Inc. | External Use
www.Freescale.com