NXP Semiconductors OM-SE051ARD User manual

OM-SE051ARD
EdgeLock™SE051
Arduino Compatible Development Kit
PLUG & TRUST DEVELOPMENT PLATFORM
Quick Start Guide

Quick Start Guide
Get to know the OM-SE051ARD board
Please visit www.nxp.com/SE051 for documentation and
software.

Quick Start Guide
Jumper
Description
Configuration
Default
J6, J7
Antenna
1
-2: via DB15 connector
2
-3: Internal antenna
J6 1
-2, J7 2-3
(
no antenna)
J9, J10
I2C Master pull up
connection
Open: not connected
1
-2: 3k3 Ohm
Open
J12
Reset
1
-2 RST on J11:3
2
-3 RST on Arduino
2
-3
J13
SE051_ENA pin routing
1
-2: ENA low, VOUT not connected to VIN
2
-3: ENA controlled by Arduino pin J1:6
2
-3
J14
SE051_VCC pin routing
1
-2: Routed to VDD supply voltage (see J19)
3
-4: Routed to SE_Vout pin
5
-6: Routed to J11:4 pin
1
-2
J15
I2C Slave SDA
connection
1
-2: Arduino R3 J4:5
3
-4: Arduino R3 J2:9
3
-4
J16
SE051_Vin supply
1
-2: Supplied by J11:2 pin
2
-3: Supplied by the VDD (see J19)
2
-3
J17
I2C Slave SCL connection
1
-2: Arduino R3 J4:6
3
-4: Arduino R3 J2:10
3
-4
J18
SE051_IO2 routing
1
-2: Routed to J11:9
2
-3: Routed to J2:3
1
-2
J19
VDD supply voltage
1
-2: From LDO
2
-3: From 3V3_ARD pin
2
-3
J24
VDD supply selection for
LDO
(if LDO is used
-see J19)
1
-2: From 5V_PC (USBI2C flat connector)
3
-4: From 5V_DB15 pin
5
-6: From 5V_ARD pin
1
-2
J37, J38
I2C Slave bus pull up
configuration
Open: 3k3 Ohm (I2C fast mode)
1
-2: 660 Ohm (I2C high speed mode)
Open

Quick Start Guide
Connect OM-SE051ARD with i.MX 8M EVK board
Please also visit www.nxp.com/SE051 for documentation.

Quick Start Guide
Connect OM-SE051ARD with
i.MX 8M Mini and i.MX 8M Nano
Please also visit www.nxp.com/SE051 for documentation.

www.nxp.com/SE051
NXP, the NXP logo and EdgeLock are trademarks of NXP B.V. All other
product or service names are the property of their respective owners.
© 2020 NXP B.V.
EdgeLock SE051
Visit www.nxp.com/SE051 for more
information about the SE051 product range.
SUPPORT
Visit www.nxp.com/support for a list of
phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for complete
warranty information.
Get Started
Download installation software
and documentation at
www.nxp.com/SE051
Reference document: SE051
OM-SE051ARD development kit
Part Number: OM-SE051ARD