Ocean Digital WR-220 User manual

Internet Radio
User Manual
WR-220
Please read this user manual carefully before using the receiver.

Contents
Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connect the radio with your Wi-Fi Router . . . . . . . . . . . . . . . . . 4
Start using internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
My Favorite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Internet Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Media Centre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Alarm Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Add your favorite URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Music Streaming from mobile devices . . . . . . . . . . . . . . . . . . . 12
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Helpful Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Technical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Front
Back
Location of Controls
1. LCD Display
2. Dial Control
- Rotate the dial to adjust volume level
Adjust LCD backlight level under
Standby
Push the dial to confirm / select
menu options
- Push to stop/resume playback of the
radio
3. Speaker
4. On/off
- Press to power on/ Standby
5. Local
- Quick access the local stations in
your country
6. Menu
- Press to enter menu
7. Preset
- Long press to store the station to
Favorite list
- Press briefly to recall the favorite
station
8. Left
- Back to previous menu
- Left cursor
9. Right
- Right cursor
- Enter edit menu under Favorite list
10. Earphone jack
11. Line Out jack
12. DC IN jack
-
1
1
2
3 4 5 6 7 8 9 10
11 12

Remote Control
2
1. Power: Standby on/off
2. Mute: Speaker on/off
3. 0-9: Input numbers for encryption code, recall
favorite stations, enter index number to select
item from the list
Toggle the same numeric key gives you a
choiceto input letters
4. : Return to Main Menu
5. Mode: Switch between Internet radio and Media
Centre
6. Alarm: Alarm Setting
7. : Preset the current playing station to Favorite
8. : Recall the favorite station
9. Local: Access radio stations in your local country
10. Cursor up
11. $Cursor down
12. Cursor left/Back
13. Cursor right
14. Info: Access the network and system information
15. Enter: Confirm selection
16. : Next (next item in the list: next station, next
track)
17.: Previous (Previous item in the list: previous
station, previous track)
18. Volume +: Increase volume
19. Volume -: Decrease volume
20. Sleep: Sleep Timer setting
#:
:
!:
":

Before you start
Please ensure the following is ready:
You have a broadband internet connection.
A wireless broadband router is connected to the internet successfully.
The radio supports Wireless B, G and N connection (Wireless N router can also be used with
the setting on B or G).
You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data
encryption code/password. You need to key in the correct code when the radio is connected
to the wireless router for network connection.
If you do not know the code/password, please contact the person /technician who set up the
router/network for you.
The radio can work via Wireless network connection (Wi-Fi connection)
Precautions
The radio should not be used in a high temperature or high humidity environment over
prolonged periods of time as this may damage the unit.
Keep the radio away from liquids as it may get damaged. Please switch off the radio
immediately if water or liquids is spilled into the radio. Consult with the shop you bought this
radio for any question.
Avoid using or storing the unit in dusty or sandy environment.
Do not open and repair the radio by yourself.
Use only the AC adaptor supplied with the radio.
Connecting a power supply with a different rating will cause permanent damage to the radio
and may be hazardous.
Clean only with dry cloth.
3

Connect the radio with your Wi-Fi Router
1. Insert the adaptor plug into the DC socket located at the rear side of the radio.
Plug the adaptor into a wall socket outlet.
Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
2. The radio will power on and display as follow. Choose <Yes> to start configuring network.
3. Select <Add/Remove AP> and <Add AP>:
4. It will start scanning the available Wi-Fi routers nearby. Choose to connect your AP and
enter the encryption code. Press ‘Enter’ to confirm.
Remark: The encryption codes are case sensitive to upper and lower case.
5. When the Wi-Fi connection is done, the display shows:
4
Connecting to Network
>>>>>>>
Configure Network?
<Yes> No
Welcome
Add/Remove AP
AP:[ ]
Add AP
Remove AP
Association complete
When this symbol appears, the radio is
trying to connect to the Wi-Fi network
Skytune
Search
< 1/6 >
01:42AM
If you try to select Skytune when the Wi-Fi
network is not connected, it will show the
message below:
Skytune not connected,
retry later
After the Wi-Fi network is connected,
you will see the Wi-Fi signal bar here.
1. fm Bay Smooth Jazz
H2 ch
< 18/11225 00:25
iRadio

5
Start using internet radio
Press <Menu> to return to the main menu or the key on the remote controller. You will see
the item list below:
<My Favorite>- To show the list of favorite stations which have been assigned to the presets.
There are up to 99 presets available.
<Internet Radio>- Start exploring the worldwide radio stations and music here
<Media Centre>- Music streams from the UPnP servers/ devices under the same Wi-Fi
network
<Alarm>- Setting of Alarms
<Sleep Timer>- You can set the timer to turn the radio standby after certain time elapsed
<Configuration>- More settings available for you to configure the radio as you desire
My Favorite
This is to show the list of your Favorite stations which have been assigned to the presets.
¢ Preset a station
While you are playing a radio station, press the button on the remote controller or long
press the <Preset> key on the unit, you will see the icon appears as below. It means the
station is added to the Favorite list.
The new added station will always showing in the last item on the Favorite list.
You can store up to 99 presets
¢ Recall a station
Press the button on the remote controller or press the <Preset> button briefly on the unit to
recall the Favorite list. You can enter the Index number to quickly scroll to the radio station you
want to listen.
e.g., On the remote controller, press 2 8 and Enter, it will scroll to the station no. 28.
¢ Edit your favorite list
On the Favorite list, choose the radio station you want to edit then press the right "key on the
My Favorite
Media Centre
Alarm
Sleep Timer
Configuration
Internet Radio
1. fm Bay Smooth Jazz
128kbps, 44100 Hz, 2 ch
< 1/1 00:39
HISTORY
Preset icon

6
remote controller. It will enter the Edit menu with the following options:
Move down – To move down the ranking of a station
Move up – To move up the ranking of a station
Delete – To delete a particular station
Internet Radio
On the main menu, choose <Internet Radio> and you will find the options below:
Skytune
Select Skytune to start enjoying thousands of radio stations over the world. You can filter your
search by Region, Music genre and talks. The <Local Radio> let you access quickly the
stations available in your local area.
You can change the Local Radio area under Configuration> Local radio setup.
Search
Instead of browsing the radio station list, you can access the desired station by performing
search and input the name of the station.
History
The radio will memorize the stations you have listened on the radio. It can memorize up to 99
stations.
If you have listened more than 99 stations, it will supersede the first station that you have
listened.
Media Centre
UPnP (Universal Plug and Play)
You can stream music from the Networked device which supports UPnP function. For
instance, most of the latest computer laptop supports UPnP, and you can stream music from
Windows Media Player application on the computer and listen on your radio.
1. If your PC is running Microsoft Windows XP, then you can use Windows Media Player
11(WMP11) to act as your UPnP( Universal Plug and Play) media server. (For Windows 7 or
above, please download the correspond version of Windows Media Player). Windows Media
Player 11 may be downloaded from Microsoft’s website and install by following the
instructions detailed in its installation wizard.
2. Once installed, Windows Media Player 11 will create a library from all the media files
available to it on your PC. To add new media files to the library, select’ File > Add to
Library…> Advanced Options’, Click ‘Add’ and choose the files you wish to add and click’
OK’.
Skytune
Search
History
Local Radio
Globe All
Globe By Genre
Globe By Region

7
3. Now you need to connect your Internet radio to Windows Media Player 11 and configure it to
allow the radio to access your media library. In order to this , you will need to do the
following:
a. Go to the main menu of the radio, select <Media Player>g<UPnP>.
b. It will scan for all available UPnP servers . Note, this may take a few seconds for the
radio to complete its scan and before the scan has completed, the radio will display
‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP servers and found.
c. After a successful scan. Select your UPnP server, by rotating the dial if there is more
than one UPnP server, and then press SELECT (note, your radio will display’ Access
Denied’ at this stage)
4. Your PC will now prompt you that a device has attempted to connect to your UPnP server. In
order to allow the radio to have access to the media files, you will need to click the ‘Library’
tab from Windows Media Player 11 and select the <Media Sharing> item to open the ‘Media
Sharing’ window.
Selecting ‘Media Sharing…’ for Windows Media Player11:
5. From the ‘Media Sharing’ windows , the radio will be listed as an unknown device. Click on
the unknown device listed, then click the ‘Allow’ button and then click ‘OK’. Allowing the
Radio to Connect:

8
Music streaming via UPnP
1. Once the UPnP server is configure to share media files with your radio, you can start music
streaming.
2. On the main menu, select <Media Centre> and choose <UPnP>
3. It may take a few seconds for the radio to complete the scan for available UPnP servers. If
no UPnP servers are found, it will show <Empty List>.
4. After a successful scan is done, select your UPnP server.
5. The radio will show the media categories available from the UPnP server, e.g. ‘Music’,
‘Playlists’ etc.
6. Choose the media files that you wish to play.
You can set the mode of playback under <Configuration g Playback setup>.
My Playlist
You can make you own playlist for the UPnP music files. Choose the song you want to add to
playlist, long pressing the Dial until the sign appears. The song will be added to “My
playlist”. You can add up to 99 songs to “My Playlist”.
The UPnP playlist will be erased when the radio is powered off.
Clear My Playlist
Remove all songs in “My Playlist” to allow a new playlist to be prepared.
Alarm Setting
1. Choose <Alarm> from the main menu or press the <Alarm> button on the remote controller.
2. Select either Alarm 1 or Alarm 2, and choose <Turn on> to activate the Alarm.
3. Follow the alarm wizard instructions to set the alarm.
The wizard will guide you through the settings below:
Time – Set the time for the alarm
Sound – You can choose <Wake to Radio> or <Wake to Melody> for the alarm sound.
¢ Wake to Radio – only the preset stations can be used for the radio alarm (stations from
Favorite list).
Please preset your favorite station before setting the alarm.
¢ Wake to Melody- The Melody is default by system.
Repeat – You can schedule the alarm as you desire – Everyday, Once or multiple days.
Alarm Volume – Adjust the volume of the alarm as you like by rotating the dial.
4. After the above settings are completed, press the left !button to exit and make sure the
Alarm is turned on. You will see the Alarm icon appeared on the display if it is activated.

9
Sleep Timer Setting
You can set the timer to let the radio go standby after certain time elapsed in the range of 15
minutes to 180 minutes.
You can press <Sleep> button on the remote controller to set the timer.
You will see the icon appeared on the display if the timer is set.
Configuration
Network
There are two options under this setting: Wi-Fi Network and Wi-Fi Channels
Wi-Fi Network
¢ Add / Remove AP
Add AP – It will scan out a list of routers available nearby
Remove AP – If you have already added a router and want to remove it, choose this option.
¢ AP: [ ]
If you have added more than one routers on the radio and want to switch to another one,
select this option to change.
¢ Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the radio.
Usually signal levels lower than -70dBm is at weaker level and if it affects the reception of
your radio, you may need to optimize the router location or check any problem of the router
itself.
¢ IP
The IP is set <Dynamic> by default. Select to change <Fixed> IP according to your network
condition.
¢ DNS
The DNS is set <Dynamic> by default. Select to change <Fixed> DNS according to your
network condition.
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation
between different countries. Therefore it is necessary to choose the Wi-Fi channels to
ensure the Wi-Fi performs satisfactory.
We have already set the channels according to the requirement in different countries.
Choose the country you are staying from the list to get the correct channel.
The default country is set <Europe/United Kingdom>, press <Enter> on the Remote
controller or push the <Dial> to edit the country selection.
Alarm Sleep Timer
1. fm Bay Smooth Jazz
H2 ch
< 18/11225 00:25
iRadio

10
Date and Time
You can set Date & Time manually, choose the date and time format under this option.
Daylight saving setting is available.
If you want the time to be synchronized with the network time, choose <Use Network Time>
from the menu.
If you choose to use Network time, the manual setting of Date and Time will be disabled.
Language
English, German and Simplified Chinese are available.
Local Radio Setup
This is to set the country of <Local Radio> that you want to access when you select <Local
Radio>. When you press the <Local> on the remote controller or choose <Local Radio> under
“Skytune”, it will give one-touch access the radio stations in the country that you have
selected on this setting.
The <Local Radio> is set in <Europe/United Kingdom> by default. Select the <Europe/United
Kingdom> and press <Enter> to change the country you want.
Playback Setup
This is to set the mode of playback under UPnP streaming: Repeat All, Repeat Once or
Shuffle.
DLNA Setup
Our radio supports streaming from DLNA devices and you can rename your radio for easy
recognition by the DLNA servers.
Resume when Power on
You can enable this function so that the radio will connect to the last listened station
automatically when the radio is power on. This function is off by default.
Dimmer
You can set the display backlight level as you prefer.
There are two settings available: Mode and Level
¢ Mode: Normal or Power Saving
Normal – the display will stay with the same level of brightness all the time without dim down.
Power Saving – the display will dim down after 15 seconds if no operation is made on the
radio.
¢ Level: Bright and Dim
Bright - the display will stay at the selected level when there is operation on the radio or if the
mode is selected in <Normal> as described above.
Dim - the display will dim to the selected level when <Power saving> mode is selected.
¢ Dimmer on Standby
When the radio is on Standby, rotate the dial to adjust your prefer backlight level which you
feel comfortable especially during night time.

11
Information
View the Network and System Information of your radio.
To access quickly to this information, press the <Info> button on the remote controller.
When you use your PC to manage the My favorite stations, you have to use the IP address
and you can view this info from here. Then type in the IP address
(Configuration>Info>Network>IP) to your PC’s browser input window
Software Update
There may be software release to upgrade features of the radio time to time.
Check the update regularly to keep your radio up to date with the latest software.
Reset to Default
You can do the reset to clear all the settings and return to default settings.
** Please note all the Station presets, Settings and configuration will be lost after you have
performed the Reset.
Add your favorite URL
You can add your favorite radio station if you know the published URL of the radio.
We provide an embedded server for your radio and you can manage your favorite stations
anytime to add or edit the list. Follow the steps below to access the embedded server:
1. Connect your PC to the same Wi-Fi network as your radio.
2. Locate the IP address in either way as follow:
¢ Press the <Info> button on the remote controller, choose <Network> and scroll to <IP> to
view the IP address
¢ On the main menu, go to Configuration > Information > Network > IP
3. Open the web browser (we support Internet Explorer and Chrome) in your PC and type the
IP address of the radio (e.g. 192.168.1.11). The screen will pop up as below:

12
4. You can input the name and URL of a new radio station under the Add channel section, then
click Submit. The new station will sync to the Favorite list of your radio immediately.
You can add up to 99 radio stations.
Music Streaming from mobile devices
The radio is compatible to play music streams from Android or Apple devices.
When the radio is playing streams from the remote devices, the display will be showing as
below:
For Apple devices
1. Make sure your iPhone is connected to the same Wi-Fi network as the radio.
2. On your iPhone, swipe from the bottom to get the quick menu as below. You will see the
Airplay icon appeared which means your iPhone has discovered the Airplay compatible
devices nearby. (fig.1)
3. Tap the Airplay icon and you will find a list of the devices. The iRadio-xxxxx is the name of
your radio.
Choose the iRadio-xxxxx and tap “Done”. The audio speaker source is changed from your
iPhone to the radio now. (fig.2 / 3)
4. Go to your music library and select your favorite music to play. Some music Apps such as
Spotify which supports Airplay can stream as well. The radio will switch to Airplay mode and
start playing in seconds.
The LCD will display <Playing from remote source>.
Playing from remote source
05:02PM
(fig.1) (fig.2) (fig.3)

13
5. If you want to resume radio playback, you have to switch off the Airplay mode on your
phone.
Go to the Airplay menu and choose the iPhone as the audio speaker’s source. (fig.4 / 5)
If you do not turn off the Airplay mode on your iPhone, you will see <Error> message
on the radio when you try playing the radio station.
For Android devices
1. Make sure your device is connected to the same Wi-Fi network as the radio.
2. If your device supports DLNA feature, follow the steps below:
i) Open the music library on your phone, you will find the device selection icon as below, tap
this icon.
ii) Choose the device with <iRadio-xxxxx> and select your favorite music to start playing
3. For the devices without DLNA feature, you can install some Apps to do the same function.
(fig.4) (fig.5)

Trouble Shooting
Problem Cause Solutions
• Confirm that a Wi-Fi or Ethernet
Wired connected PC can access the
internet (i.e. can browse the web)
using the same network.
Check that a DHCP server is available,
or that you have configured a static IP
address on the radio.
Check that you firewall is not blocking
any outgoing ports. As a minimum the
radio needs access to UDP and TCP
ports 80,554,1755,5000 and 7070.
•
•
Network down
Cannot connect to
Wi-Fi network
Router restricts access
to listed MAC addresses
Obtain the MAC address from
Configuration > Information > Network
> Wi-Fi MAC and add to the allowed
equipment list on your access point.
Note: The radio has separate MAC
addresses for wired and wireless
networks;
Insufficient Wi-Fi signal
strength
•
•
Check distance to router; see if a
computer can connect to the network
in this location
Optimize the distance of the router’s
location
Unknown encryption
method
Change encryption method on router.
The radio supports WEP, WPA, WPA2
Firewall preventing
access
Check the following ports are open:
UDP and TCP ports 80 and 123; DNS
port 53. Windows Media Player: varies
– non-Microsoft firewalls may require
configuration for UPnP.
If your radio can
connect to the
network successfully,
but is unable to play
particular stations
•
•
•
•
The station is not broadcasting at this
time of the day (remember it may be
located in a different time zone).
The station has too many people
trying to attach to the radio station
server and the server capacity is not
large enough.
The station has reached the maximum
allowed number of simultaneous
listeners.
The link on the radio is out of date. This
is updated automatically every day, so
the next time you turn on the link will be
recognised.
14

1. If the Internet Radio keeps re-buffering radio station:
The Internet Radio is streaming the data from the radio station via your broadband
connection, if there is a high error rate on your broadband connection, or the connection is
intermittent, then it will cause the Internet Radio to pause until the connection is re-
established and it has received enough data to start playing again.
If your Internet Radio keeps stopping, please check the DSL modem to ensure that the
Broadband line is not suffering a high error rate or disconnections. If you are experiencing
these problems, you will need to contact your broadband supplier.
2. What is Buffering?
When playing a stream, the Internet Radio/Media player, downloads a small amount of the
stream before it starts playing. This is used to fill in any gaps in the stream that may occur if
the internet or the wireless network is busy.
The Internet Radio streams music data from the PC while you are listening. If a stream gets
blocked or experiences Internet congestion while transferring it may stop/interfere with the
quality of play. If this happens, check your internet connection speed- it must be faster than
the speed of the streams.
15

Technical Specification
Model: WR-220
Power input: 5V 1A
Power voltage: 100-240V~50/60Hz
Wireless Network: IEEE802.11b/g/n
Security Protocol: WEP/WPA/WPA2
Audio output power: 2W (RMS)
Audio sockets: 3.5mm earphone jack, 3.5mm Line-out jack
Unit Dimension: 164 x 98 x 98 mm (L x H x D)
Remark: Specification may vary without notice
What’s included in the box
* Internet Radio
* Power adaptor
* Remote control
* User manual
16