Ocean Digital DBA-03R User manual

Internet Radio Adaptor with
DAB and Bluetooth
User Manual
DBA-03R
(Additional powered speaker / active speaker is required to use this product)
Please read this user manual carefully before using receiver

Location of Controls
1. TFT color display
2. Infrared remote sensor
3. 3.5 mm audio out socket –
Connect external powered
speakers with 3.5 mm plug or
RCA adaptor with 3.5mm plug
4. 3.5mm antenna input socket
5. Optical Out- Digital optical
output connection
6. DC IN socket- Connect with
the AC adaptor supplied in the
package
7. Power On/OFF switch
- 1 -

Remote control
: Press to mute the sound.
: Power on/off standby.
1-10: Preset and recall the radio station by
pressing a specific number.
Press and hold the button to store the
station.
Press briefly to recall the station.
: Press to adjust the backlight, there are
three levels available.
: Long pressing to save the playing
station to a specific number at your
choice. Press it briefly to recall the
preset list.
▲ / ▼: Up/Down button, press to scroll up and
down on the menu;
During playback of the radio channel:
Internet radio mode: back to the
internet radio menu.
DAB mode: press ▲ / ▼ return to the
station list.
FM mode: press ▲ / ▼ to fine tune the
frequency.
: Press it to return to previous menu /
left navigation.
: Right navigation / enter into sub menu.
OK: Press to select/confirm an option;
FM mode: press to auto scan the next
available station.
: Press to set the Alarm on the radio
: Set the sleep timer of the radio, press
the button repeatedly to select
The timer period you desire.
INFO: To view the detailed information of the
current playing radio station or music
stream from UPnP.
: To enter the setup wizard.
: Return to the main menu of the radio
mode you are using or exit the
operating menu to playing screen
MODE: Press to enter the menu of the radio
modes.
EQ: Equalizer, press to enter EQ list and
choose the preferred style.
: Previous song (for Bluetooth and
UPnP).
: Play/pause (for Bluetooth and UPnP).
: Next song (for Bluetooth and UPnP).
- 2 -

Before you start
Please ensure the following is ready:
* You have a broadband internet connection.
* A wireless (Wi-Fi) broadband router is connected to the internet
successfully.
The radio supports Wireless B ,G and N connection (Wireless N router
can also be used with the setting on B or G).
* You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption code/password. You need to key in the
correct code when the radio is connected to the wireless router for
network connection.
If you do not know the code/password, please contact the person /
technician who set up the router/network for you.
* The radio can work via Wireless network connection (Wi-Fi
connection)
Precautions
* The radio should not be used in a high temperature or high humidity
environment over prolonged periods of time as this may damage the
unit.
* Keep the radio away from liquids as it may get damaged. Please switch
off the radio immediately if water or liquids is spilled into the radio.
Consult with the shop you bought this radio for any question.
* Avoid using or storing the unit in dusty or sandy environment.
* Do not open and repair the radio by yourself.
* Use only the AC adaptor supplied with the radio.
Connecting a power supply with a different rating will cause permanent
damage to the radio and may be hazardous.
* Clean only with dry cloth
- 3 -

Getting started
Connect the AC adaptor supplied in the package to the DC jack at the rear
side of the radio.
The radio is an adaptor and does not have internal speaker. Prepare
a powered speaker which has the 3.5mm pin to plug in to the 3.5 mm
line out jack on the radio.
The radio supports also the optical connection. If you have a system
comes with optical input, connect to the optical out on the radio to
listen.
Switch the radio on using the Power on/off switch. The radio will power up
and the display on the front will light up and display as follow:
Select YES to start the wizard, select No to set up manually. If you select
YES, it will start setting the date and time by choosing the 12 or 24 hour
format, update the time from Network (this option is recommended) or
you can set the time manually by selecting No Update.
It will then prompt you to set the time zone, select the time zone in your
country, then select Daylight Saving is applicable and whether you want
to keep network connected:
WELCOME
- 4 -

Then choose the WLAN Region Wlan region
Australia
Europe
Connecting to the Wireless (Wi-Fi) Network
The radio will search the wireless networks which are available and
display a list of the SSID (name of the wireless router). Select your SSID
by using the <OK> button:
Then you need to enter the encryption password to access the wireless
router.
To enter the code, press ◄►▲▼buttons to choose the characters, press
<OK> button to confirm and skip to the next entry. If you want to make
correction, scroll to the tab BKSP to erase the character that you just
entered. After the input is completed, scroll to the tab OK then press
<OK> button on the remote control to save the key.
The radio will start connecting to the network. If the connection is
successful, the following screen will appear.
- 5 -

If connection is failed, the radio returns to the password entry screen.
System Settings
Internet Radio
Music Player
DAB
FM
Bluetooth
Sleep
Alarms
System settings >
Equaliser >
Network >
Time/Date >
Language >
Factory reset
Software update >
Software upgrade >
System Settings
- 6 -

- 7 -

Turning on/off the Radio
To power on/off the radio, press the Power on/off switch at the rear side of
the unit.
To turn it to Standby, press the Power button. It will switch to Standby.
It will display the clock and alarm time if it is set.
- 8 -

10/10/2009
18꞉19
22꞉00 06꞉15
To turn it ON again, do the same by pressing the Power button.
Alarms
It allows you to set and check the alarm time.
Press button to set the alarm as the screen shows below, press ▲▼ to
choose Alarm1 or Alarm2, then press OK to enter the alarm setting.
1. Enable: Press OK to set the Alarm Off, Daily, Once, Weekends, or
Weekdays.
2. Time: Press ▲ or ▼ to set the hour and then press OK to go to set the
minute.
3. Mode: You can set the alarm sound source as Buzzer, DAB, FM or
Internet Radio.
4. Preset: If you choose the sound source as DAB, FM or Internet Radio,
then there will be an extra menu “Preset” for you to choose the preset
station or last listened station.
5. Volume: You can set the alarm sound level as you want.
6. Save: Press Save to confirm the alarm setting.
Sleep Timer
You can set the timer to put the radio in standby after certain time
elapsed, from 15 minutes to 60 minutes with the step of every 15 minute.
Press the button on remote control to enter the setting, press the
same button repeatedly to choose the timer option you prefer. The sleep
timer icon will display on the bottom left corner and the time remaining
before the radio goes into standby.
Mode
The radio has five modes: Internet radio, Music Player, DAB radio, FM
radio and Bluetooth.
Press <Mode> button to enter the menu of modes, display as below:
- 9 -