Ocean Digital WR-210CB User manual

WR-210CB
Internet Radio with Bluetooth
Please read this user manual carefully before using the receiver.
User Manual

Contents
Location of Controls .......................................1
Remoter control .............................................2
Remote control character list ..........................3
Switching on the radio ....................................4
Connecting to your WiFi Network ...................5
Internet Radio ...............................................6
Aux In ...........................................................8
DLNA ............................................................8
Bluetooth ......................................................8
Media Center ................................................9
Information Center .......................................10
Configuration ...............................................11
Trouble Shooting .........................................18
Technical Specification .................................21

Location of Controls
1. Standby button
2. Right button
3. Left / Back button
4. Preset button
5. Local button
6. Home
7. Infrared remote sensor
8. Speaker
9. TFT display 2.4”
10. Rotary control knob for Volume/Dial/Select – Rotate
to adjust the volume/browsing menu, press the knob to
select for confirmation
11. Aux-in jack
12. Earphone jack
13. Line out jack
14. DC IN jack
1
2
3
4
5
6
7
8
9
10
DCIN5.9V
Aux-in
11 12 13 14
- 01 -

1. : Mute
2. : Standby button
3. 0-9: Favorite station key / input letters
and numbers for WiFi Encryption
code
4. : Preset the current playing station
to Favorite
5. : Recall the favorite list
6. ▲: Cursor up
7. t: Cursor left / back to previous menu
8. u: Cursor right
9. ▼: Cursor down
10. OK: confirm button
11. : Alarm button
12. : Sleep Timer
13. Vol+: Volume up
14. Vol-: Volume down
15. : Main Menu
16. Mode: Switch between the modes of
radio
17. EQ: Equalizer
18. : Previous station on the list /
previous track on UPnP
19. : Play/pause for internet radio
20. : Next station on the list/next track
on UPnP
21. Local: Access the local station list
(Local area set up in
Configuration)
22. Info: View the detailed information of
the radio channel or music
under UPnP.
23. Dimmer: Dim down the back-light of
the display
Remoter control
- 02 -

Remote control character list
Key“0”―― 0,‘DEL’
Key“1”―― ‘1’->‘@’->‘ ’（space）->‘！’-> “ (double quotes)
->‘#’->‘$’->‘%’->‘&’-> ’（single quotes）->‘（’
->‘）’->‘*’->‘+’->‘，’->‘-’->‘.’->‘/’->‘:’->‘;’->‘<’->‘=’-
>‘>’->‘?’-
>‘[’->‘\’->‘]’->‘^’->‘_’->‘`’->‘{’->‘|’->‘}’->‘~’
Key “2”―― 2,A,B,C,a,b,c
Key“3”―― 3,D,E,F,d,e,f
Key“4”―― 4,G,H,I,g,h,i
Key“5”―― 5,J,K,L,j,k,l
Key“6”―― 6,M,N,O,m,n,o
Key“7”―― 7,P,Q,R,S,p,q,r,s
Key“8”―― 8,T,U,V,t,u,v
Key“9”―― 9,W,X,Y,Z,w,x,y,z
Note: press ’→’ to move to the next character and press ’OK’
button to confirm.
You can also press ↑ ↓ to change the character /number, then
press the right key to confirm the entry.
After you finish the entry, press the select button to confirm.
- 03 -

Switching on the radio
Connect the main adapter to the radio unit, one end to the DC IN
on the radio and the other end to the AC main wall socket.
Caution: Use only the main adapter supplied with the radio.
Connecting a power supply with a different rating will cause
permanent damage to the radio, and may be hazardous.
The display on the front of the radio will light up and show:
Then you can select your preferred language on the radio.
It will ask you if you want to Enable the <Check Network when
Power on>; it is suggested to select <Yes>. Then, the radio will
always check the available WiFi network automatically.
Welcome
• English
Deutsch
Français
< 2/7 8
01:44
- 04 -

Connecting to your WiFi Network
The screen below will appear. You can select <Yes> to proceed to
search for an available WiFi network. If your router has the WPS
function, you can select <Yes(WPS)> to proceed.
It will then start scanning the network. After the search is done, it
will display a list of the available routers.
Choose your router from the list and enter the WEP (Wired
Equivalent Privacy) or WPA(WiFi Protected Access) code. If your
network is not encrypted with the WEP or a WPA code, the unit
will connect to the router automatically.
Note: The encryption code would have been set by the
person who set up and configured your network.
Please follow the steps below to enter the encryption code of
your router.
- Turn the rotary knob to browse the characters
- Press the Úright button to skip to the next entry
- After you're finished entering the code, press the Rotary knob to
confirm.
The radio will start connecting to the network.
After the router is connected successfully, it will display the main
menu as follows:
You can now start enjoying the internet radio.
01:01
Would you like to
configure Network now?
Yes(WPS) NOYes
01:44
Linksys
Homeaudio
Demo
MOVE INPUT:OK
Ent er
Password
1/1
16:23
08:58
Internet Radio
5
- 05 -

Choose <Internet Radio> from the menu, and you will see
several listed options.
To start listening to the radio stations worldwide, select <Radio
Station/Music>.
My Favorites
This is to show the list of your Favorite stations which have been
assigned to the presets.
To preset a station:
While you are playing a favorite station, press and hold the
<Preset> button and the <Add to My Favorite> menu will
display. Press the rotary knob to confirm. The playing station will
be added to the preset list automatically.
The presets will be stored in ascending order. You can store up to
250 presets.
Note: Preset 1 to 5 are reserved for your own choice of the
dedicated radio channels. The preset will be intended to
store from no. 6 onward. You can scroll to choose no. 1-5 at
your preference.
You can edit your favorite list at anytime. Go to <My Favourite>
on the menu or press the <Preset> button when it displays the list
of favorite stations, then press the -> right button. The following
options will display:
Delete – To delete the selected station
Shift up- To shift the selected station by one level up on the
ranking
Shift down – To shift the selected station by one level down on the
ranking
Rename – To rename the selected station
Play – press and play the selected station
Internet Radio
Press rotary knob to confirm
The symbol on the top row means
station is added to preset list
- 06 -

Choose the radio station that you want to make changes to. Then
press the Right key, and you will see a list with the above options.
Then choose your desire action.
To recall a preset station:
Press the <Preset> button briefly and choose your desired
station.
Radio Station / Music
Selecting this option allows you to find your desired radio station
by Genre, Location., etc.
Local Radio
If you want to access quickly the radio stations located in your
area, select this function, and it will display the list of the stations
available in your area.
History
The radio will memorize the last 10 listened stations.
Service
Search Stations
You can find your desired radio station by entering the name of
the station.
Add New Radio Station
If you cannot find your desire station from the Radio station list,
and you have the streaming URL address, you can input the link
here and add it to your favorites list.
When the radio station is playing, the display will show a color
image transmitted from the radio station.
Internet Radio
Delete
Shift Up
Shift Down
< 1/5 >
iRadio
iRadio
.977 The 80s Channel
977
Music
Internet Radio
- 07 -

Aux-In/DLNA/Bluetooth
Aux In
You can enjoy the music from other audio devices (such as smart
phones, MP3 players, etc) by connecting the audio cable to the
AUX IN connector at the rear of the unit.
DLNA
The Internet radio can stream music from DLNA compatible
devices, provided that the Internet radio and other DLNA devices
are under the same WiFi network.
The radio will be discovered as “AirMusic” when you try to search
it on other devices. If you want to change to something other
than AirMusic, go to Configuration and DLNA setup to make the
change.
Bluetooth
1. The radio can receive and play music streamed by another
Bluetooth device.
Choose Bluetooth mode on the radio, and it will be
discoverable on other Bluetooth devices.
2. Turn on Bluetooth on your device, and look up the device
named “WR-210” from the list. Select it to start pairing.
3. If the connection is successful, it will show “Connected” on
your Bluetooth device list.
4. You can start playing music from your Bluetooth device now.
- 08 -