Ocean Digital WR-390 User manual

Internet Radio
User Manual
WR-390
Please read this user manual carefully before using the receiver.

- 3 -
Contents
Location of Controls ...................................................................4
Remote control ..........................................................................6
Entering security code for your wireless network ..........................7
1. Getting started ....................................................................9
2. Charging battery ..................................................................9
3. Network Setup ...................................................................10
4. Overview of features and functions ......................................11
5. Internet Radio ....................................................................12
6. Media Centre .....................................................................14
7. DAB+/DAB Radio ...............................................................15
8. FM Radio ..........................................................................16
9. Bluetooth playback ............................................................17
10. Alarm Setting ...................................................................18
11. Sleep Timer Setting ..........................................................19
12. Configuration ...................................................................20
13. Remote control via PC / Smart phone
- Tuning internet radio & manage favourite ..........................25
14. Trouble Shooting ..............................................................28
Helpful Tips .............................................................................30
Technical Specification .............................................................31

- 4 -
Location of Controls
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
11

- 5 -
Location of Controls
1.
Press and hold to power on/off
Press and release to Standby / activate the radio
2.
Press to enter the alarm setting (Alarm 1 and Alarm 2)
3.
Access Home screen/press this button to return to the playing screen.
Press and hold to access EQ setting.
4. ►
Right cursor/Enter edit menu under Favourite list /View the big clock &
radio info under playing screen
5. ◄
Back to previous menu/left cursor
6. Preset button 1-4
Press and hold to add the top 4 favorite station respectively.
Press it briefly to recall the station.
7.
Press and hold to preset a particular station
Press to recall the favourite list
8. Scroll / Select / Volume
Rotate to scroll along, up/down on the menu
Rotate to adjust the volume in playing screen.
Press in to confirm / Select menu options
Press in to stop / resume playback of radio channel
9. TFT color screen 2.4"
10. Remote sensor
11. Speaker
12. Telescopic antenna
13. Battery charging LED
14. DC IN - USB-C port
15. Reset pin hole
16. Earphone jack 3.5 mm

- 6 -
Remote control
1. : Press to toggle between Standby and
Operation.
To turn the radio off, press and hold the
button.
Note: Only the button on the radio device
can power on the radio.
2. : Mute
3. 0-9: Input index number on the list / input
characters for WiFi password
4. : Preset the current playing station to
Favorite
5. ▲ : Cursor up
6. ◄ : Cursor left / back to previous menu
7. : Alarm button
8. : Sleep Timer
9. Mode: Switch between radio modes
10. : Home
11. : Previous station on the list/previous
track on media sources
12. Local: Access the local station list
(Local area set up in Configuration)
13. : Recall the favorite list
14. OK: confirm button
15. ► : Cursor right
16. ▼ : Cursor down
17. Vol+: Volume up
18. Vol-: Volume down
19. EQ: Equalizer
20. : Next station on the list/next track on
media sources
21. : Play/pause for media sources
Play/stop for Internet radio
22. Dimmer: Access the Dimmer menu to adjust
the brightness of the display
23. Info: Quick access to Network and System
information

- 7 -
Entering security code for your wireless network
Using remote control
On the alpha-numeric keypad, press the button repeatedly to cycle through
the characters assigned to each button. Refer to the following list.
To input a character, highlight it and press the [OK] button to confirm and
input the next character. When it comes to the last character of the
password, press and hold [OK] to complete the entry.
Button 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:'”\|,./<>?
Button 2: 2ABCabc
Button 3: 3DEFdef
Button 4: 4GHIghi
Button 5: 5JKLjkl
Button 6: 6MNOmno
Button 7: 7PQRSpqrs
Button 8: 8TUVtuv
Button 9: 9WXYZwxyz
Button 0: 0
Using control button on the radio unit
Use the [ Scroll/Select/Vol+/- ] knob to scroll through the characters,
highlight it and press [ Scroll/Select/Vol+/- ] knob to confirm and input the
next character. When it comes to the last character of the password , press
and hold [ Scroll/Select/Vol+/- ] knob to confirm and complete the entry.
Note: The password is case sensitive.

- 8 -
Before you start
Please ensure the following is ready:
You have a broadband internet connection.
A wireless broadband router is connected to the internet successfully. The
radio supports Wireless B, G and N connection (Wireless N router can also
be used with the setting on B or G). You know the Wired Equivalent Privacy
(WEP) or Wi-Fi Protected Access (WPA) data encryption code/password.
You need to key in the correct code when the radio is connected to the
wireless router for network connection. If you do not know the
code/password, please contact the person/technician who set up the
router/network for you.
The radio can work via Wireless network connection (Wi-Fi connection).
Precautions
• The radio should not be used in a high temperature or high humidity
environment over prolonged periods of time as this may damage the unit.
• Keep the radio away from liquids as it may get damaged. Please switch off
the radio immediately if water or liquids is spilled into the radio. Consult
with the shop you bought this radio for any question.
• Avoid using or storing the unit in dusty or sandy environment.
• Do not open and repair the radio by yourself.
• Use only the specified power input voltage to power up the radio.
Connecting a power supply with a different rating will cause permanent
damage to the radio and may be hazardous.
• Clean only with dry cloth.

- 9 -
1. Getting started
The radio is powered by the built-in lithium battery. A USB-C cable is
included in the product package.
Press and hold the [ ] button to power on.
To power off the radio, press and hold the same button.
Press the [ ] button briefly to enter standby or activate the radio.
When the radio is in OFF mode, connect a power supply will power up the
radio and enter into Standby.
2. Charging battery
You can check the level of battery power remains on the radio.
There is a battery power indicator showing on the top row of the
screen.
When battery power is low, the battery indicator keeps blinking as a
reminder for battery charging.
To charge the battery, connect the USB plug to the port where located
at the rear side of the radio, connect the other end to a power source
supplied in 5V 1.5A OUT, the LED will light up in red indicates the battery is
charging.
The LED will turn to green when charging is done.
Note: The charging might take much longer to complete if the radio is
playing while charging. It is suggested to use a 5V 2A power source if
the radio is being charged and played at the same time to ensure
getting enough power for the audio output.

- 10 -
3. Network Setup
Internet connection can be setup via Wireless network (WiFi).
Your radio requires a broadband Internet connection.
• If this is first time use, the Configure Network wizard will be displayed.
Choose Yes to start configuring network. Scroll to "Yes" and press
"Scroll/Select/Vol" knob to confirm.
• Select Add/Remove AP from the list, use the [ Scroll/Select/Vol+/- ] knob
to scroll and press it to confirm, then choose Add AP (Scan):
• It will start scanning the Wi-Fi networks available. Scroll to your network
and press [ Scroll/Select/Vol+/- ] to confirm. If your wifi network has a
password protected, it will ask you to enter the passphrase / password.
Please refer to the above section ‘Entering security code for your
wireless network’ on P.7.
Note: The password is case sensitive. Please consult with the one who
setup your network if you don't know the password.
• When the Wi-Fi connection is successful, the Association Complete will
be shown briefly. The wifi signal bar will appear on the top left corner of the
display:
Wi-Fi signal bar