OHAUS Ranger 3000 Series User manual

Presented By
Dallas HoustonAustinFt Worth
NicolScales.com
800.225.8181
Contact Us
Nicol Scales & Measurement is an ISO Accredited Calibration
Company that has provided calibration, repair and sales of all types
of weighing and measurement products since 1931.

Quick Start Guide Ranger™3000
Ohaus Corporation www.ohaus.com iRanger 3000 Quick Start Guide
Controls –Ranger 3000
Button
Primary Function
(Short Press1)
Secondary Function
(Long Press2)
Menu Function
(Short Press)
Turns scale on
Sets display to zero
Turns the scale off
Selects/accepts displayed
setting
Sends the current value to
the selected COM ports if
AUTOPRINT is set to Off.
Toggles through active
weighing units
Advances to the next
menu or menu item.
Rejects the current setting
on the display and
advances to the next
available setting
Initiates an application
mode
Allows changing the
application mode
Returns to previous menu
item
Accumulates the weight
and displays the
accumulated information at
0 load.
Enters User menu
Quickly exit User Menu.
Aborts calibration in
progress
Enter/clear a tare value.
Clears the accumulation
when the accumulation
information is displayed.
Notes: 1 Short Press: Press less than 1 second.
2 Long Press: Press and hold for more than 2 seconds.

Ranger™Count 3000 Quick Start Guide
Ohaus Corporation www.ohaus.com ii Ranger Count 3000 Quick Start Guide
Controls –Ranger Count 3000
Button
Primary Function
(Short Press)
Secondary Function
(Long Press)
Menu Function
(Short Press)
Library Function
(Short Press)
Turn scale on
Zero the display
Turn scale off.
Accept the
current menu
or setting.
Accept the current
setting.
Send the displayed
value to the COM
port
Change the weighing
unit.
Advance to the
next menu or
setting.
Increment the
displayed
value.
Advance to the
next library or
setting.
Increment the
displayed value.
Initiate the function
of the current
application mode.
Switch between
Check Weigh, Check
Count and Off.
Previous menu
Decrement the
displayed
value.
Previous library
Decrement the
displayed value.
Accumulate the
weight or pieces.
Enter user menu.
View the Audit Trail
event counters
Exit the menu.
Abort the
calibration
Exit the library.
ID number input
Display/Store APW
Enter numeric
values on the
display.
Enter dot (.) on the
display.
Switch between
scale 1 and scale 2
Clear last character
from the display.
Switch between
positive and negative
value
Perform a tare
operation.
Display/Start APW

Quick Start Guide Valor™7000
Ohaus Corporation www.ohaus.com iii Valor 7000 Quick Start Guide
Controls –Valor 7000
Button
Primary Function
(Short Press1)
Secondary Function
(Long Press2)
Menu Function
(Short Press)
Turns scale on
Sets display to zero
Turns the scale off
Selects/accepts displayed
setting
Sends the current value to
the selected COM ports if
AUTOPRINT is set to Off.
Toggles through active
weighing units
Toggles through available
settings
Selects function setting
Selects active Mode
Returns to previous
settings
Accumulates the weight
and displays the
accumulated information at
0 load.
Enters User Menu
Quickly exit User Menu
Enter/clear a tare value.
Clears the accumulation
when the accumulation
information is displayed.
The IR Sensor can be
programmed to act as
“touchless” button.
Notes: 1 Short Press: Press less than 1 second.
2 Long Press: Press and hold for more than 2 seconds.

Ohaus Corporation, 7 Campus Drive, Suite 310, Parsippany, New Jersey, 07054, USA www.ohaus.com
Declaration of conformity We, Ohaus Corporation, declare under our sole responsibility that the balance models listed below marked with “CE”
–are in conformity with the directives and standards mentioned.
Declaración de Conformidad Nosotros, Ohaus Corporation, declaramos bajo responsabilidad exclusiva que los modelos de balanzas indicados
a continuación –con el distintivo "CE" –son conformes con las directivas y normas citadas.
Déclaration de conformité Nous, Ohaus Corporation, déclarons sous notre seule responsabilité, que les types de balance cités ci-dessous –
munis de la mention "CE" –sont conformes aux directives et aux normes mentionnées ci-après.
Konformitätserklärung Wir, die Ohaus Corporation, erklären in alleiniger Verantwortung, dass die untenstehenden Waagentypen –
gekennzeichnet mit "CE" –mit den genannten Richtlinien und Normen übereinstimmen.
Dichiarazione di conformità Noi, Ohaus Corporation, dichiariamo sotto nostra unica responsabilitàche i tipi di bilance specificati di seguito –
contrassegnati con la marcatura “CE” – sono conformi alle direttive e norme citate.
Model/Type Ranger 3000 R R3 31 1. .. .. ., , R Ra an ng ge er r C Co ou un nt t 3 30 00 00 0 R RC C3 31 1. .. .. ., , V Va al lo or r 7 70 00 00 0 V V7 71 1… … S Se er ri ie es s S Sc ca al le e ( (E EC C T Ty yp pe e A Ap pp pr ro ov va al l C Ce er rt ti if fi ic ca at te e T T8 82 25 52 2) )
Modelo/Tipo Bascula S Se er ri ie e Ranger 3000 R R3 31 1… …, , R Ra an ng ge er r C Co ou un nt t 3 30 00 00 0 R RC C3 31 1… …, , V Va al lo or r 7 70 00 00 0 V V7 71 1… …
Modèle/Type Balance Série Ranger 3000 R R3 31 1… …, , R Ra an ng ge er r C Co ou un nt t 3 30 00 00 0 R RC C3 31 1… …, , V Va al lo or r 7 70 00 00 0 V V7 71 1… …
Modell/Typ Ranger 3000 R R3 31 1… …, , R Ra an ng ge er r C Co ou un nt t 3 30 00 00 0 R RC C3 31 1… …, , V Va al lo or r 7 70 00 00 0 V V7 71 1… … S Se er ri ie e W Wa aa ag ge e
Modello/Tipo Bilancia S Se er ri ie e Ranger 3 30 00 00 0 R R3 31 1… …, , R Ra an ng ge er r C Co ou un nt t 3 30 00 00 0 R RC C3 31 1… …, , V Va al lo or r 7 70 00 00 0 V V7 71 1… …
EC Marking
Marcado CE
Marquage CE
EC-Markierung
Marcature CE
EC Directive
Directiva CE
Directive CE
EC Richtlinie
Direttiva CE
Applicable Standards
Normas aplicables
Normes applicables
Geltende Standards
Norme applicabili
2006/95/EC
Low Voltage
Baja tensión
Basse tension
Niederspannung
Bassa tensione
EN 61010-1:2010
2004/108/EC
Electromagnetic Compatibility
Compatibilidad electromagnética
Compatibilitéélectromagnétique
Elektromagnetische Verträglichkeit
Compatibilitàelettromagnetica
EN 61326-1:2006
For non-automatic weighing instruments used in an Article 1, 2.(a) application, additional metrological marking according to Annex IV of Council
directive 2009/23/EC must be attached to the instrument.
Para instrumentos de pesaje no automático usados en una aplicación descrita en el Artículo 1, 2.(a), se debe colocar sobre el instrumento una
marcación metrológica adicional de acuerdo con el Anexo IV de la Directriz del Consejo 2009/23/EC.
Pour les instruments de pesage non-automatiques utilisés dans une application selon l’Article 1, 2.(a), un repérage métrologique additionnel
conforme à l’Annexe IV de la Directive 2009/23/EC du Conseil doit être présent sur l’instrument.
Für nicht selbsttätige Waagen, die in einer Anwendung gemäss Artikel 1, 2.(a) verwendet werden, muss eine zusätzliche messtechnische
Markierung gemäss Anhang IV der Richtlinie 2009/23/EC des europäischen Rats am Instrument befestigt werden.
Per gli strumenti di pesatura non automatici usati nelle applicazioni elencate nell’Articolo 1, 2.(a), è necessario applicare allo strumento delle
marcature metrologiche secondo quanto descritto nell’allegato IV della Direttiva del Consiglio 2009/23/EC.
yy
n
nn nn nn n
2009/23/EC
Non Automatic Weighing Instruments
Para balanzas no automáticas
Balances àfonctionnement non
automatique
Für nicht selbsttätige Waagen
Per bilance a funzionamento non
automatics
EN45501:1992 /AC:1993 1)
yy
Last two digits of the year in which the CE marking was affixed.
Las dos últimas cifras del año de colocación del marcado "CE".
Les deux derniers chiffres de l'année d'apposition du marquage "CE".
Die beiden letzten Ziffern des Jahres, in dem die "CE"-Kennzeichnung angebracht wurde.
Le ultime due cifre dell'anno in cui èstata apposta la marcatura "CE".
nnnn
Identification number of the Notified Body supervising the quality system for production.
Número de identificación de la Conocida Cifra controlando el sistema de calidad de la producción.
Numéro d’identification de l’Organisme Notifié qui surveille la système qualité de la production.
Identifikationsnummer der Benannten Stelle, die das Qualitätssystem der Produktion überwacht.
Numero identificazione dall’Ufficio Notificato sorvegliando il sistema qualitá della produzione.
1) Applies only to certified non-automatic weighing instruments.
Se aplica solamente a los instrumentos de pesaje no automático aprobados.
S’applique uniquement aux instruments de pesage àfonctionnement non automatique approuvés.
Betrifft nur zertifizierte nicht selbsttätige Waagen.
Si applica soltanto agli strumenti pesanti non automatici certificati.
Issued on: 2012-12-04
Ted Xia
President
Ohaus Corporation
Parsippany, NJ USA
Robert Hansen
Compliance Manager
Ohaus Corporation
Parsippany, NJ USA
*30037461*