Oki C9600hdn User manual

Banner Tray Installation Guide
1
Step 1: Checking the parts
The banner tray has the three parts.
a. Guide base
b. Sheet guide
c. Stacker
Step 2: Assembling the Banner
Tray
1. Press the button on the right side of the printer
(a) to open the multi-purpose tray (b). Open
the paper supporter (c).
2. Open the top cover.
3. Hold the guide base with both hands. Install the
guide base as shown, laying it on top of the
multi-purpose tray.
Note: Be sure the paper tray is on top of the
extended multipurpose tray.
4. Make sure the guide base is securely in place.
5. Close the top cover.
c
a
c
b

2
6. Flip the sub-stacker (a) in the direction indi-
cated by the arrow so that it rests on the plastic
piece that extends from the printer (b). Be sure
the sub-stacker is in place before you go to the
next step.
7. Hook the stacker to the shaft of the guide base
and pull back so it is secure.
8. Insert the sheet guide into the holes in the
guide base.
9. Flip the stacker over onto the guide base.
b
a

3
10. Make sure that
•thestacker(a) is on the sheet guide (b).
• the sub-stacker (c) is on the plastic
extension piece on the printer (d).
Step 3: Loading Banner Paper
Note: You can load a maximum of 20 banner
sheets at 30 lb basis weight.
1. Flip the stacker over the printer (1). Adjust the
multi-purpose tray’s paper guides to the size of
the paper (2).
2. Insert the front edge of the paper in the manual
guide along the sheet guide (1) and place the
back edge over the stacker (2) as shown.
3. Flip the stacker onto the guide base while rolling
the paper along the contour of the stacker.
d
c
a
b

4
4. Make sure that
•thestacker(a) rests on the sheet guide (b).
• the sub stacker (c) is on the plastic
extension piece on the printer (d).
•Thepaperisstraight.
5. To print, define the banner paper size in the
printer driver, and specify Multi-Purpose Tray for
paper source. For details, refer to "Custom
Page Size" in your online Printing Guide.
dc
b
a
58376201
© 2006 Oki Data Americas, Inc.