OLG COSMIC SYSTEM STRAIGHTLINE User manual

TOOLS REQUIRED: Powered screwdriver
Installation Guide
myocelinkgroup.com
Cosmic System Straightline

STEP 1: Assemble frames & rails together, loosely (1 turn from tight).
Recommended
2-person Step
STEP 2: Assemble screen brackets to frame, loosely (1 turn from tight).
* To prevent possible scratches or damage,
assemble the desk upside down on a soft surface
such as a blanket, carpet or packaging.
* Attach leg to the top assembly by using bolts,
spring washer, flat washer. Tighten using the allen
wrench provided.
COSMIC SYSTEM STRAIGHTLINE
Installation Guide

STEP 6: Attach screens to centre pole with top slug connectors.STEP 5 Attach centre screen end seal and top cap with soft non-marking
mallet.
STEP 4: Slide centre screen pole over bracket. Carefully remove end seal on centre screens &
fit screen between end brackets & screw self tappers to fix screen tightly.
STEP 3: Fix desk top with 5mm overhang over metal frame. Where desktops
butt together, make sure these are fitted tight together.
COSMIC SYSTEM STRAIGHTLINE
Installation Guide

STEP 10: Attach return screen end seal and top cap with soft non-marking
mallet.
STEP 9: Remove return screen end seal, and attach screen to bracket with self
tapper screws.
STEP 8: Remove return screen and x bracket in place. As an alternative to screws, use
3M double sided tape to fasten return screen bracket to desk top.
STEP 7: Mark out end of return screens on desk.
COSMIC SYSTEM STRAIGHTLINE
Installation Guide
Place light mark
on desktop.

COMPLETED.STEP 13: Fully tighten all rail to frame screws, & then screen bracket screws.
STEP 12: If for whatever reason you have to remove the top seal, then to refit, slightly
arc in the middle, placing the 2 ends into location, & gently tap down.
STEP 11: Install all top caps simultaneously down all together gently tapping
with a soft non- marking mallet.
COSMIC SYSTEM STRAIGHTLINE
Installation Guide

TOOLS REQUIRED: Powered screwdriver
Installation Guide
myocelinkgroup.com
Cosmic Desk

STEP 1: Assemble frames & rails together, loosely (1 turn from tight).
* To prevent possible scratches or damage,
assemble the Desk upside down on a soft surface
such as a blanket, carpet or packaging.
* Attach Leg to the Top assembly by using Bolts,
spring washer, flat washer. Tighten using the
Allen Wrench provided.
STEP 2: Fix desk top with 5mm overhang over metal frame. Lastly, fully tighten
all rail to frame screws.
Recommended
2-person Step
COSMIC DESK
Installation Guide

TOOLS REQUIRED: Powered screwdriver
Installation Guide
myocelinkgroup.com
Cosmic Workstation

STEP 1: Assemble frames & rails together, loosely (1 turn from tight).
* To prevent possible scratches or damage,
assemble the Desk upside down on a soft surface
such as a blanket, carpet or packaging.
* Attach Leg to the Top assembly by using Bolts,
spring washer, flat washer. Tighten using the
Allen Wrench provided.
STEP 2: Fix desk top with 5mm overhang over metal frame. Lastly, fully tighten
all rail to frame screws.
Recommended
2-person Step
COSMIC WORKSTATION
Installation Guide