Olympus EVIS EUS EU-ME2 User manual

CAUTION: This quick reference guide is only a summary of the EU-ME2, EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow
the EU-ME2, EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 or EU-ME2 Premier Plus purchase.
EU-ME2, EU-ME2 Premier Plus
Quick Reference Guide - FLOW Mode
FLOW Mode - General
1
Press the FLOW key on the keyboard.
* The LCD touch panel automatically switches from MAIN MENU to FLOW MAIN.
2
Simultaneously, the ultrasound image on the monitor switches to the FLOW mode. Ensure that the ROI with color
appears on the image.
3
Select a FLOW mode: COLOR, POWER, or H-FLOW.
FLOW Key
FLOW MODE Buttons COLOR FLOW
The direction and flow rate of the
blood flow are shown in colors.
Blood flowing towards the
transducer is shown in red.
POWER FLOW
The intensity of received signals
is shown in colors. As the blood
flow intensifies, the displayed
color becomes vivid.
H-FLOW
Displays the blood flow strength
information with less blooming
artifacts than POWER FLOW
mode. Also displays the blood
flow direction in color.
FLOW MAIN
ROI
(Region of interest)
Touch Panel: MAIN MENU
Gray scale
Color scale
(Value: velocity range)

2
CAUTION: This quick reference guide is only a summary of the EU-ME2, EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow
the EU-ME2, EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 or EU-ME2 Premier Plus purchase.
EU-ME2, EU-ME2 Premier Plus
Quick Reference Guide - FLOW Mode
FLOW Mode - General (Continued)
4
Select the LOCATION button and adjust the ROI position. The ROI can be moved by using the ROI buttons or the trackball.
5
Select the SIZE button and adjust the ROI size. The ROI size can be adjusted by using the ROI buttons or the trackball.
6
Use the FLOW key to exit the FLOW mode.
ROI
ROI
LOCATION Button Trackball
Trackball
ROI Buttons
ROI Buttons
SIZE Button

3
CAUTION: This quick reference guide is only a summary of the EU-ME2, EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow
the EU-ME2, EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 or EU-ME2 Premier Plus purchase.
EU-ME2, EU-ME2 Premier Plus
Quick Reference Guide - FLOW Mode
Display (Single/Dual)
Pulse Wave Doppler (PW) Mode
1
Press the DISPLAY button to switch between single-screen display and dual-screen display.
1
Detect blood flow in B mode or FLOW mode.
SINGLE DUAL
FLOW Mode Switch B Mode and FLOW Mode
FLOW GAIN
1
Press the FLOW GAIN buttons to adjust the sensitivity of the flow signal in the FLOW mode.
* Flow gain can be adjusted in 32 steps.
FLOW GAIN
FLOW GAIN buttons

4
CAUTION: This quick reference guide is only a summary of the EU-ME2, EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow
the EU-ME2, EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 or EU-ME2 Premier Plus purchase.
EU-ME2, EU-ME2 Premier Plus
Quick Reference Guide - FLOW Mode
Pulse Wave Doppler (PW) Mode (Continued)
3
The PW CURSOR (two short lines) is shown at the center of the left image. Move the PW CURSOR to the blood flow
using the trackball.
4
Press the PW START button and the Pulse Wave Doppler Waveform starts.
PW CURSOR
PW START Button
Pulse Wave
Doppler Waveform
PW Key
PW CURSOR
BASELINE
ROI
PW image
B mode or FLOW-
mode image
SAMPLE
VOLUME
2
Press the PW key on the keyboard. Simultaneously, the image switches to the PW mode.
* The LCD touch panel automatically switches from MAIN MENU to PW MAIN.

5
CAUTION: This quick reference guide is only a summary of the EU-ME2, EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow
the EU-ME2, EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 or EU-ME2 Premier Plus purchase.
EU-ME2, EU-ME2 Premier Plus
Quick Reference Guide - FLOW Mode
Sample Volume
1
The SAMPLE VOLUME button designates the width of the blood flow from which Pulse Wave Doppler is acquired. Make
sure the cross-sectional surface is positioned between the two lines. Press the SAMPLE VOLUME button to adjust the
width of the two lines. The width can be adjusted with the trackball or ARROW keys.
SAMPLE
VOLUME
Volume
1
The volume of Pulse Wave Doppler Waveforms can be adjusted. Select the PW ADJUST tab and adjust the volume using
the VOLUME buttons. Pulse Wave Doppler sound can be output from the bottom of the EU-ME2. The adjusted volume
setting is saved and recalled the next time the EU-ME2 is used.