Olympus SZ2-ILLC User manual

INSTRUCTIONS
This instruction manual is for the Olympus SZ2-ILLC Coaxial
Illuminator. To ensure the safety, obtain optimum performance
and to familiarize yourself fully with the use of this equipment, we
recommend that you study this manual thoroughly before operating
the system.
Retain this instruction manual in an easily accessible place near the
work desk for future reference.
Coaxial illuminator
SZ2-ILLC
Optical Microscope Accessory
AX6617

Important............................................................................................................................................................. 1
1 Nomenclature ............................................................................................................................................ 6
2 Controls........................................................................................................................................................... 7
3 Assembly........................................................................................................................................................ 9
4 Coaxial reflected light observation.......................................................................................11
5 Troubleshooting guide.....................................................................................................................12
Contents

1
The coaxial illuminator enables coaxial reflected light observation when it is mounted at the bottom of an SZ2
series microscope.
SAFETY PRECAUTIONS
Important
This unit can be used in combination with only the SZ2-CLS or LG-PS2 light guide illuminator.
When using the LG-PS2, for safety, use only the lamp bulb designated in the following table.
For details, refer to the “SAFETY PRECAUTIONS” in the instruction manual for the LG-PS2.
illuminator Lamp Bulb Specifications
LG-PS2 JCR12V-100WB Halogen bulb (with mirror), mfd. by USHIO,
average life 1000 hours

2
SZ2-ILLC
Safety Symbols
The following symbols are found on the unit. Study the meaning of the symbols and always use the equipment in the
safest possible manner.
Symbol Explanation
Indicates that the surface becomes hot, and should not be touched with bare hands.
Before use, carefully read the instruction manual. Improper use could result in personal
injury to the user and/or damage to the equipment.
Indicates that the main switch is OFF.
Protective grounding, which can be used only by the Olympus service personnel for
incorporating grounding in machines. Do not use this grounding for other purpose than
the above. (LG-PS2 only)
Warnings
Warning engravings are placed at parts where special precaution is required when handling and using the unit. Always
heed the warnings.
Warning engraving
position of the LG-PS2
Light source
(Top and front panels) [High temperature warning]