Omron XW5T User manual

1
New Product
DIN Track Push-in Terminal Blocks
XW5T
Push-in Plus Terminal Blocks to
Downsize Control Panels and Save
Work
• Push-in Plus terminal blocks are more compact than traditional
screw terminal blocks.
No loosening means maintenance-free application.
• Slim models available down to a width of 3.5 mm to help
downsize control panels.
• Light insertion force and strong holding strength to achieve
both less wiring work and high reliability.
• 'Hands-free' structure that holds an inserted screwdriver to
achieve better workability when wiring stranded wires without
crimp terminals.
Model Number Legend
Refer to Safety Precautions on page 17.
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
XW5T - P@-@-@@ XW5G - P@-@-@
Feed Through Terminal Blocks Grounding Terminal Blocks
(1) (2) (3) (1) (2) (3)(4)
(2) Wiring
1.1: 1:1
1.2: 1:2
2.2: 2:2
(3) Number of Tiers
1: 1 tier
2: 2 tiers
(1) Maximum Applicable
Stranded Wire
1.5: 1.5mm2
2.5: 2.5mm2
4.0: 4.0mm2
(4) Color
Blank: Dark gray
BL: Blue

XW5T
2
Part Names and Configuration
DIN Track Terminal Block (Top Surface) Basic Configuration
*Do not use on the side. Two-tier Terminal Blocks with a width of 3.5
mm are excluded.
Terminal (insertion) hole
Release hole (to release wire)
Label attachment section
Short Bar insertion holes
• Youcan attach a Short Bar to
either of the two holes.
• Insert the tester pins here to
perform a continuity check.
Note: 1. Do not insert more than one wire into
one terminal (insertion) hole.
2. Do not insert more than one Short
Bar into one Short Bar insertion hole.
Name Description
DIN Track
Terminal Blocks
Both Feed Through and Grounding Terminal Blocks are
available.
End Cover
This part is required to prevent electric shock.
Attach one End Cover to the exposed metal surface of the
last Terminal Block or to any Terminal Block that is next to
a different shape of Terminal Block.
End Brackets End Brackets must be attached to both ends to hold the
Terminal Block in place.
Nameplate or
Labels
This part is available as an accessory.
Select the most suitable one for your needs.
You can also use commercially available nameplates that
are 9.5 mm wide and 0.5 mm thick on the top. *
Short Bar This part is available as an accessory.
Select one as required.
DINTrack
Terminal Block
End Cover
End Brackets
Nameplate or Labels
Short Bar
End Brackets

XW5T
3
Ordering Information
*For stranded wires.
Accessories
Short Bars
For XW5T-P1.5-@
*Replace the box (@) in the model number with the code for the covering color. Specify the color: RD = red, BL = blue, YL = yellow
For XW5T-P2.5-@
*Replace the box (@) in the model number with the code for the covering color. Specify the color: RD = red, BL = blue, YL = yellow
Classification Product Type
Applicable
wire sizes *
(mm2)
Number of
levels
Number of cramp
position per level Color Weight (gram) Model
Feed Through
Terminal blocks
Standard terminals
0.08 to 1.5 1 2
Dark grey
3.3 XW5T-P1.5-1.1-1
0.14 to 2.5 1 2 6.3 XW5T-P2.5-1.1-1
0.2 to 4.0 1 2 8.4 XW5T-P4.0-1.1-1
0.08 to 1.5 1 2
Blue
3.3 XW5T-P1.5-1.1-1BL
0.14 to 2.5 1 2 6.3 XW5T-P2.5-1.1-1BL
0.2 to 4.0 1 2 8.4 XW5T-P4.0-1.1-1BL
Multi tiers terminal
0.08 to 1.5 2 2
Dark grey
6.5 XW5T-P1.5-1.1-2
0.14 to 2.5 2 2 12.5 XW5T-P2.5-1.1-2
0.2 to 4.0 2 2 16.5 XW5T-P4.0-1.1-2
0.08 to 1.5 2 2
Blue
6.5 XW5T-P1.5-1.1-2BL
0.14 to 2.5 2 2 12.5 XW5T-P2.5-1.1-2BL
0.2 to 4.0 2 2 16.5 XW5T-P4.0-1.1-2BL
Multi conductor
terminals
0.08 to 1.5 1 3
Dark grey
4.1 XW5T-P1.5-1.2-1
0.14 to 2.5 1 3 8.2 XW5T-P2.5-1.2-1
0.2 to 4.0 1 3 10.8 XW5T-P4.0-1.2-1
0.08 to 1.5 1 3
Blue
4.1 XW5T-P1.5-1.2-1BL
0.14 to 2.5 1 3 8.2 XW5T-P2.5-1.2-1BL
0.2 to 4.0 1 3 10.8 XW5T-P4.0-1.2-1BL
0.08 to 1.5 1 4
Dark grey
4.9 XW5T-P1.5-2.2-1
0.14 to 2.5 1 4 10.4 XW5T-P2.5-2.2-1
0.2 to 4.0 1 4 13.4 XW5T-P4.0-2.2-1
0.08 to 1.5 1 4
Blue
4.9 XW5T-P1.5-2.2-1BL
0.14 to 2.5 1 4 10.4 XW5T-P2.5-2.2-1BL
0.2 to 4.0 1 4 13.4 XW5T-P4.0-2.2-1BL
Grounding
Terminal blocks
Standard terminals
0.08 to 1.5 1 2
Green/yellow
4.7 XW5G-P1.5-1.1-1
0.14 to 2.5 1 2 9.9 XW5G-P2.5-1.1-1
0.2 to 4.0 1 2 11.8 XW5G-P4.0-1.1-1
Multi tiers terminal
0.08 to 1.5 2 2 8.1 XW5G-P1.5-1.1-2
0.14 to 2.5 2 2 16.6 XW5G-P2.5-1.1-2
0.2 to 4.0 2 2 20.8 XW5G-P4.0-1.1-2
Multi conductor
terminals
0.08 to 1.5 1 3 5.5 XW5G-P1.5-1.2-1
0.14 to 2.5 1 3 11.6 XW5G-P2.5-1.2-1
0.2 to 4.0 1 3 14.1 XW5G-P4.0-1.2-1
0.08 to 1.5 1 4 6.3 XW5G-P1.5-2.2-1
0.14 to 2.5 1 4 13.8 XW5G-P2.5-2.2-1
0.2 to 4.0 1 4 16.7 XW5G-P4.0-2.2-1
Appearance No. of poles Colors Model*Application
2
Red (RD)
Blue (BL)
Yellow (YL)
XW5S-P1.5-2@
Used for cross-over wiring between Terminal Blocks.
3XW5S-P1.5-3@
4XW5S-P1.5-4@
5XW5S-P1.5-5@
10 XW5S-P1.5-10@
Appearance No. of poles Colors Model*Application
2
Red (RD)
Blue (BL)
Yellow (YL)
XW5S-P2.5-2@
Used for cross-over wiring between Terminal Blocks.
3XW5S-P2.5-3@
4XW5S-P2.5-4@
5XW5S-P2.5-5@
10 XW5S-P2.5-10@

XW5T
4
For XW5T-P4.0-@
*Replace the box (@) in the model number with the code for the covering color. Specify the color: RD = red, BL = blue, YL = yellow
Labels
Note: 1. Different models are used for the top and side surfaces.
2. There is no place to mount the Top-surface Labels on Two-tier Terminal Blocks with a width of 3.5 mm, so they cannot be used.
3. Use commercially available nameplates (9.5 mm wide, 0.5 mm thick) on the top only. Do not use on the side. You can also use a
commercially available printer. Check with the manufacturer of the nameplates for information on applicable printers.
4. Refer to page 20 for details on printing labels.
End Cover
End Brackets
Separator Plates
Note: Refer to 6. Using the Accessories on page 20 for information on using the accessories.
Appearance No. of poles Colors Model*Application
2
Red (RD)
Blue (BL)
Yellow (YL)
XW5S-P4.0-2@
Used for cross-over wiring between Terminal Blocks.
3XW5S-P4.0-3@
4XW5S-P4.0-4@
5XW5S-P4.0-5@
10 XW5S-P4.0-10@
Appearance Applicable
Terminal Blocks Model Contents Minimum order (Sheet) Application
XW5@-P1.5-@XW5Z-P1.5LB1 1 sheet with 102 top labels 5
Used to identify wiring.
(Material: PA resin, blank)
XW5Z-P1.5LB2 1 sheet with 108 side labels 5
XW5@-P2.5-@XW5Z-P2.5LB1 1 sheet with 72 top labels 5
XW5Z-P2.5LB2 1 sheet with 72 side labels 5
XW5@-P4.0-@XW5Z-P4.0LB1 1 sheet with 60 top labels 5
XW5Z-P4.0LB2 1 sheet with 60 side labels 5
Appearance Applicable Terminal Blocks Model Application
XW5@-P1.5-1.1-1 XW5E-P1.5-1.1-1
This part is required to prevent electric shock.
Always mount End Covers to the following locations when you
use Terminal Blocks. (For details, refer to page 21.)
• Exposed metal surface of the last Terminal Block
• Any Terminal Block that is next to a different shape of
Terminal Block
XW5@-P1.5-1.1-2 XW5E-P1.5-1.1-2
XW5@-P1.5-1.2-1 XW5E-P1.5-1.2-1
XW5@-P1.5-2.2-1 XW5E-P1.5-2.2-1
XW5@-P2.5-1.1-1 XW5E-P2.5-1.1-1
XW5@-P2.5-1.1-2 XW5E-P2.5-1.1-2
XW5@-P2.5-1.2-1 XW5E-P2.5-1.2-1
XW5@-P2.5-2.2-1 XW5E-P2.5-2.2-1
XW5@-P4.0-1.1-1 XW5E-P4.0-1.1-1
XW5@-P4.0-1.1-2 XW5E-P4.0-1.1-2
XW5@-P4.0-1.2-1 XW5E-P4.0-1.2-1
XW5@-P4.0-2.2-1 XW5E-P4.0-2.2-1
Appearance Width (mm) Model Application
6XW5Z-EP6 End Brackets are installed on the ends of the Terminal Blocks
to prevent them from moving on the DIN Track.
Appearance Width (mm) Model Application
12 XW5Z-EP12
This part is used to create insulation distance.
Use Separator Plates according to the clearance and creeping
distances required by the operating conditions of your
equipment.

XW5T
5
Ratings and Performance
Ratings
Feed Through Terminal blocks Standard terminals
*1. For the recommended applicable wire ranges, refer to page 17 for solid and stranded wires, and to page 19 for ferrules.
*2. You can also use ferrules for 1.0 to 1.5 mm2wires if you use ferrules without insulation sleeve. Refer to page 19 for details.
*3. Do not apply more than the rated current to the terminal block.
Model XW5T-P1.5-1.1-1 (BL) XW5T-P2.5-1.1-1 (BL) XW5T-P4.0-1.1-1 (BL)
Appearance and internal
wiring
1 tier, 1:1 1 tier, 1:1 1 tier, 1:1
Applicable wire sizes*1
Stranded wire 0.08 mm2to 1.5 mm20.14 mm2to 2.5 mm20.2 mm2to 4.0 mm2
Solid wire 0.14 mm2to 1.5 mm20.14 mm2to 4.0 mm20.2 mm2to 6.0 mm2
Stranded wire with
ferrule with Plastic
sleeve
0.14 mm2to 0.75 mm2(1.5 mm2) *2 0.14 mm2to 2.5 mm20.25 mm2to 4.0 mm2
Dimensions 3.5 × 45 × 30.5 5.2 × 48.8 × 35.3 6.2 × 56.1 × 35.3
Rated voltage 500 V 800 V
Rated current *3 17.5 A 24 A 32 A
IEC rated voltage 500 V 800 V 800 V
IEC rated current *3 17.5 A/1.5 mm224 A/2.5 mm232 A/4.0 mm2
Usage Group (UG) B, C D B, C
UL rated voltage 300 V 51-150 V 151-300 V 301-600 V 600 V
UL rated current *3
15 A/AWG14
(SOL)
10 A/AWG16
15 A/AWG14
(SOL)
10 A/AWG16
10 A/
AWG16
5 A/
AWG16-20
20 A/AWG12 (SOL), 15 A/AWG14 30 A/AWG10 (SOL), 20 A/AWG12
Dielectric strength 1,890 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
End Cover XW5E-P1.5-1.1-1 XW5E-P2.5-1.1-1 XW5E-P4.0-1.1-1
Special tool XW4Z-00B XW4Z-00B XW4Z-00B
Applicable nameplates
XW5Z-P1.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P2.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P4.0LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
Applicable Short Bars XW5S-P1.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P2.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P4.0-@
(@: Poles = 2, 3, 4, 5 or 10)

XW5T
6
Feed Through Terminal blocks Multi tiers terminal
*1. For the recommended applicable wire ranges, refer to page 17 for solid and stranded wires, and to page 19 for ferrules.
*2. You can also use ferrules for 1.0 to 1.5 mm2wires if you use ferrules without insulation sleeve. Refer to page 19 for details.
*3. Do not apply more than the rated current to the terminal block.
Model XW5T-P1.5-1.1-2 (BL) XW5T-P2.5-1.1-2 (BL) XW5T-P4.0-1.1-2 (BL)
Appearance and internal
wiring
2 tiers, 1:1 2 tiers, 1:1 2 tiers, 1:1
Applicable wire sizes*1
Stranded wire 0.08 mm2to 1.5 mm20.14 mm2to 2.5 mm20.2 mm2to 4.0 mm2
Solid wire 0.14 mm2to 1.5 mm20.14 mm2to 4.0 mm20.2 mm2to 6.0 mm2
Stranded wire with
ferrule with Plastic
sleeve
0.14 mm2to 0.75 mm2(1.5 mm2) *2 0.14 mm2to 2.5 mm20.25 mm2to 4.0 mm2
Dimensions 3.5 × 65.7 × 41.1 5.2 × 78.8 × 45.9 6.2 × 85 × 45.9
Rated voltage 500 V 600 V
Rated current *3 17.5 A 22 A 28 A
IEC rated voltage 500 V
IEC rated current *3 17.5 A/1.5 mm222 A/2.5 mm228 A/4.0 mm2
Usage Group (UG) B, C D B, C
UL rated voltage 300 V 51 - 150 V 151 - 300 V 301 - 600 V 600 V
UL rated current *3
15 A/AWG14
(SOL)
10 A/AWG16
15 A/AWG14
(SOL)
10 A/AWG16
10 A/
AWG16
5 A/
AWG16-20
20 A/AWG12 (SOL),
15 A/AWG14
30 A/AWG10 (SOL),
20 A/AWG12
Dielectric strength 1,890 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
End Cover XW5E-P1.5-1.1-2 XW5E-P2.5-1.1-2 XW5E-P4.0-1.1-2
Special tool XW4Z-00B
Applicable nameplates XW5Z-P1.5LB2
XW5Z-P2.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P4.0LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
Applicable Short Bars XW5S-P1.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P2.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P4.0-@
(@: Poles = 2, 3, 4, 5 or 10)

XW5T
7
Feed Through Terminal blocks Multi conductor terminals
*1. For the recommended applicable wire ranges, refer to page 17 for solid and stranded wires, and to page 19 for ferrules.
*2. You can also use ferrules for 1.0 to 1.5 mm2wires if you use ferrules without insulation sleeve. Refer to page 19 for details.
*3. Do not apply more than the rated current to the terminal block.
Model XW5T-P1.5-1.2-1 (BL) XW5T-P2.5-1.2-1 (BL) XW5T-P4.0-1.2-1 (BL)
Appearance and internal
wiring
1 tier, 1:2 1 tier, 1:2 1 tier, 1:2
Applicable wire sizes*1
Stranded wire 0.08 mm2 to 1.5 mm2 0.14 mm2 to 2.5 mm2 0.2 mm2 to 4.0 mm2
Solid wire 0.14 mm2 to 1.5 mm2 0.14 mm2 to 4.0 mm2 0.2 mm2 to 6.0 mm2
Stranded wire with
ferrule with Plastic
sleeve
0.14 mm2to 0.75 mm2(1.5 mm2) *2 0.14 mm2
to 2.5 mm2 0.25 mm2 to 4.0 mm2
Dimensions 3.5 × 54.1 × 30.5 5.2 × 60.5 × 35.3 6.2 × 66.5 × 35.3
Rated voltage 500 V 800 V
Rated current *3 17.5 A 24 A 32 A
IEC rated voltage 500 V 800 V
IEC rated current *3 17.5 A/1.5 mm224 A/2.5 mm232 A/4.0 mm2
Usage Group (UG) B, C D B, C
UL rated voltage 300 V 51 - 150 V 151 - 300 V 301 - 600 V 600 V
UL rated current *3
15 A/AWG14
(SOL)
10 A/AWG16
15 A/AWG14
(SOL)
10 A/AWG16
10 A/
AWG16
5 A/
AWG16-20
20 A/AWG12 (SOL),
15 A/AWG14
30 A/AWG10 (SOL),
20 A/AWG12
Dielectric strength 1,890 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
End Cover XW5E-P1.5-1.2-1 XW5E-P2.5-1.2-1 XW5E-P4.0-1.2-1
Special tool XW4Z-00B
Applicable nameplates
XW5Z-P1.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P2.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P4.0LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
Applicable Short Bars XW5S-P1.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P2.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P4.0-@
(@: Poles = 2, 3, 4, 5 or 10)

XW5T
8
*1. For the recommended applicable wire ranges, refer to page 17 for solid and stranded wires, and to page 19 for ferrules.
*2. You can also use ferrules for 1.0 to 1.5 mm2wires if you use ferrules without insulation sleeve. Refer to page 19 for details.
*3. Do not apply more than the rated current to the terminal block.
Model XW5T-P1.5-2.2-1 (BL) XW5T-P2.5-2.2-1 (BL) XW5T-P4.0-2.2-1 (BL)
Appearance and internal
wiring
1 tier, 2:2 1 tier, 2:2 1 tier, 2:2
Applicable wire sizes*1
Stranded wire 0.08 mm2to 1.5 mm20.14 mm2to 2.5 mm20.2 mm2to 4.0 mm2
Solid wire 0.14 mm2to 1.5 mm20.14 mm2to 4.0 mm20.2 mm2to 6.0 mm2
Stranded wire with
ferrule with Plastic
sleeve
0.14 mm2to 0.75 mm2(1.5 mm2) *2 0.14 mm2to 2.5 mm20.25 mm2to 4.0 mm2
Dimensions 3.5 × 63.2 × 30.5 5.2 × 72.2 × 35.3 6.2 × 76.9 × 35.3
Rated voltage 500 V 800 V
Rated current *3 17.5 A 24 A 32 A
IEC rated voltage 500 V 800 V
IEC rated current *3 17.5 A/1.5 mm224 A/2.5 mm232 A/4.0 mm2
Usage Group (UG) B, C D B, C
UL rated voltage 300 V 51 - 150 V 151 - 300 V 301 - 600 V 600 V
UL rated current *3
15 A/AWG14
(SOL)
10 A/AWG16
15 A/AWG14
(SOL)
10 A/AWG16
10 A/
AWG16
5 A/
AWG16-20
20 A/AWG12 (SOL),
15 A/AWG14
30 A/AWG10 (SOL),
20 A/AWG12
Dielectric strength 1,890 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
End Cover XW5E-P1.5-2.2-1 XW5E-P2.5-2.2-1 XW5E-P4.0-2.2-1
Special tool XW4Z-00B
Applicable nameplates
XW5Z-P1.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P2.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P4.0LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
Applicable Short Bars XW5S-P1.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P2.5-@
(@: Poles = 2, 3, 4, 5 or 10)
XW5S-P4.0-@
(@: Poles = 2, 3, 4, 5 or 10)

XW5T
9
Grounding Terminal blocks Standard terminals
Note: Use a conductive DIN Track when using a Grounding Terminal Block.
OMRON does not offer conductive DIN Tracks. Please use a commercially available product.
*1. For the recommended applicable wire ranges, refer to page 17 for solid and stranded wires, and to page 19 for ferrules.
*2. You can also use ferrules for 1.0 to 1.5 mm2wires if you use ferrules without insulation sleeve. Refer to page 19 for details.
Model XW5G-P1.5-1.1-1 XW5G-P2.5-1.1-1 XW5G-P4.0-1.1-1
Appearance and internal
wiring
1 tier, 1:1 1 tier, 1:1 1 tier, 1:1
Applicable wire sizes*1
Stranded wire 0.08 mm2to 1.5 mm20.14 mm2to 2.5 mm20.2 mm2to 4.0 mm2
Solid wire 0.14 mm2to 1.5 mm20.14 mm2to 4.0 mm20.2 mm2to 6.0 mm2
Stranded wire with
ferrule with Plastic
sleeve
0.14 mm2to 0.75 mm2(1.5 mm2) *2 0.14 mm2to 2.5 mm20.25 mm2to 4.0 mm2
Dimensions 3.5 × 45 × 30.5 5.2 × 48.8 × 35.3 6.2 × 56.1 × 35.3
IEC rated voltage 500 V 800 V
UL rated voltage 600 V
Dielectric strength 1,890 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
End Cover XW5E-P1.5-1.1-1 XW5E-P2.5-1.1-1 XW5E-P4.0-1.1-1
Special tool XW4Z-00B
Applicable nameplates
XW5Z-P1.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P2.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P4.0LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness

XW5T
10
Grounding Terminal blocks Multi tiers terminal
Note: Use a conductive DIN Track when using a Grounding Terminal Block.
OMRON does not offer conductive DIN Tracks. Please use a commercially available product.
*1. For the recommended applicable wire ranges, refer to page 17 for solid and stranded wires, and to page 19 for ferrules.
*2. You can also use ferrules for 1.0 to 1.5 mm2wires if you use ferrules without insulation sleeve. Refer to page 19 for details.
Model XW5G-P1.5-1.1-2 XW5G-P2.5-1.1-2 XW5G-P4.0-1.1-2
Appearance and internal
wiring
2 tiers, 1:1 2 tiers, 1:1 2 tiers, 1:1
Applicable wire sizes*1
Stranded wire 0.08 mm2to 1.5 mm20.14 mm2to 2.5 mm20.2 mm2to 4.0 mm2
Solid wire 0.14 mm2to 1.5 mm20.14 mm2to 4.0 mm20.2 mm2to 6.0 mm2
Stranded wire with
ferrule with Plastic
sleeve
0.14 mm2to 0.75 mm2(1.5 mm2) *2 0.14 mm2to 2.5 mm20.25 mm2to 4.0 mm2
Dimensions 3.5 × 65.7 × 41.1 5.2 × 78.8 × 45.9 6.2 × 85 × 45.9
IEC rated voltage 500 V
UL rated voltage 600 V
Dielectric strength 1,890 VAC for 1 min
(leakage current: 1 mA max.)
2,000 VAC for 1 min
(leakage current: 1 mA max.)
End Cover XW5E-P1.5-1.1-2 XW5E-P2.5-1.1-2 XW5E-P4.0-1.1-2
Special tool XW4Z-00B
Applicable nameplates XW5Z-P1.5LB2
XW5Z-P2.5LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness
XW5Z-P4.0LB@or commercially available
nameplate with 9.5 mm width and 0.5 mm
thickness