Onespace 50-2401ES User manual

MODEL 50-2401ES
SUPPLIER CODE: PMEX
ASSEMBLY INSTRUCTIONS
OneSpace is a Trademark of Comfort Products, Inc.
™
2 Drawer Cabinet
For fastest service on claims, requests for replacement parts, or
questions, please visit our website at

2 OF 12
Cabinet top maximum
weight capacity
=40lbs
Drawer maximum
weight capacity
=20lbs

3 OF 12
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.

4 OF 12
Fix sixteen Wood Dowels (1) to Panel (A), Panel (B), Panel (H),
Panel (I), Panel (K) & Panel (L) using rubber hammer.
into predrilled holes .

Screw two Drawer Slides (3-CL) to the Left Side Panel (A) using four Euro Screws (4).
Then screw two Drawer Slides (3-CR) on to the Right Side Panel (B) using four Euro Screws (4).

Screw bottom Panel (D) to Left Side Panel (A) & Right Side Panel ( B)
with four Unitar Screws (5) using predrilled holes.
Attach four Bottom Legs (E) to Bottom Panel (D) with eight CSK Screws (6)
using predrilled holes.

Press four Cams (7) into the holes as shown, making sure the arrows are pointing up.
Attach Desktop (C) to cabinet by aligning the Minix Bolts (2) into predrilled holes.
Turn the cams clockwise half a turn to lock into place.
Attach the Back Panel (N) to the cabinet by aligning Back Panel with edges of the top and
Panel (N) to the cabinet. (DO NOT Hammer too hard; tight nails will cause drawers to be hard to
open).

Small drawer assembly :
then press Cams (7) to the bottom of the holes and making sure the arrow on the top each
Large drawer assembly :
Next attch two LG side Drawer Panel (K) and Panel (I) to LG Drawer Front (G) aligning
Slide drawer Bottom Panel (Z) into both big and small drawers using the grooves
Small drawer assembly :
Attach SM back Panel (J) to SM side drawer Panels (H) and Panel (I) by aligning grooves
Large drawer assembly :
Attach LG back Panel (M) to LG side drawer Panel (L) and Panel (K) by aligning grooves with

Attach aluminium handle and two Handle Screw (10) to each drawer.

Attach two Drawer Slide (11-DR) and Drawer Slide (11-DL) to the bottom of each
drawer using eight Short Screws (12).

Aligning the sliders, insert the large drawer into the bottom slot of the cabinet and the
small drawer into the upper slot.

•
•
•
•
12 OF 12
DO NOT stand on the desk. Do not use the desk as a stepladder.
DO NOT use the desk unless all bolts and screws are firmly secured.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
P.O. Box 999
Memphis, TN 38101
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
www.comfortproducts.net
[email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™
MODEL: 50-2401ES
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is
made by Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’
autho-rized dealers as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to
repair or replacement of parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the
right to require damaged parts to be returned to Comfort Products upon request. Consent from Comfort Products must be
obtained before any warranty work is performed. This warranty applies under conditions of normal use and is not subject to
defects caused by improper assembly or disassembly; defects occurring after purchase due to product modification, intentional
damage, fire, misuse, negligence, or exposure to the elements; labor or assembly cost. This warranty does not cover the cost of
transportation or labor. In no event shall Comfort Products be liable in either tort or contract for any loss or direct, special,
incidental, consequential or exemplary damages. This Limited Warranty is NOT applicable to end-user customers who use
Comfort Products for rental purposes. This warranty applies only to end-user customers in the United States. All warranties are
limited to the original purchaser for normal use. The weight capacity of the cabinet top is 40 pounds and the weight capacity of
the drawers is 20 pounds. For claims or questions concerning this warranty, please visit www.comfortproducts.net or email us at
[email protected]