Onespace 50-612ES User manual

MODEL 50-612ES
SUPPLIER CODE: PMEX
ASSEMBLY INSTRUCTIONS
6 Cube Organizer, Espresso
For fastest service on claims, requests for replacement parts, or
questions, please visit our website at
www.comfortproducts.net/support
e-mail: [email protected]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
OneSpace is a Trademark of Comfort Products, Inc.
™

2 OF 11
Shelf maximum
weight capacity
=10lbs
Top maximum
weight capacity
=40lbs
1
2
3
4
5
6
7
7
9
8

3 OF 11
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
PART DESCRIPTION QTY
STOCK NO
1
51-612ESA
Side Panel Left
1
1
51-612ESB
Side Panel Right
2
1
51-612ESC
Top Panel
3
1
51-612ESD
Bottom Panel
4
PART DESCRIPTION QTY
STOCK NO
1
51-612ESF
Lower Shelf Panel
6
2
51-612ESG
Center Panel Top
and Bottom
7
1
51-612ESH
Center Panel Middle
8
3
51-612ESJ
Back Panel
9
1
51-612ESE
Upper Shelf
Panel
5
HARDWARE KIT
STOCK # 51-612ESKIT
PART DESCRIPTION QTY
18
A
18
Cam
B
14
Wood Dowel (6 x 30mm)
C
D
E
F
10
CSK Screw (M4.7 x 38mm)
Allen Key (M4)
18
Cam Caps
1

& Lower Shelf Panel (6), Center Panel Top and Bottom (7) and Center Panel Middle (8).
NOTE: Many of the boards are similar in appearance. Pay close attention to the dierences between the
boards as well as to the placement of the bolts.
Top Panel (3), Upper Shelf Panel (5) and Lower Shelf Panel (6).
12
5
6
8
Part # C x 14
Part # A x 18
12
5
6
3
4 OF 11
7
7

Use two CSK Screws (D) to attach the Upper Shelf Panel (5) and Center Panel Top (7). Make sure that the
grooves for the Back Panel are aligned. Also, make sure that the bolts are facing out and all the grooves are
Grooves at the
bottom
Bolts facing
out
at the bottom as shown below.
7
5
7
8
5
Part # D x 2pcs
Part # B x 2pcs
Part # E x 2pcs
5 OF 11
to the Upper Shelf Panel (5), making sure that the grooves for the Back Panel are aligned.

Part # B x 2pcs
Part # E x 2pcs
6 OF 11
With a screwdriver tighten two CSK Screws (D) to attach the Lower Shelf Panel (6) to Center Panel Middle (8).
Make sure that the grooves for the Back Panel are aligned.
7
5
8
6
7
7
5
8
6
Part # D x 2pcs
to Lower Shelf Panel (6). While doing this make sure that the grooves for the Back Panel are aligned.

7
5
6
9
8
7
7
5
6
8
7
2
Step 7:
Step 8:
7 OF 11
Part # B x 4pcs
Part # E x 4pcs
Insert the Cams (B) into the Upper Shelf Panel (5) and Lower Shelf Panel (6). Attach the Side Panel Right (2)
NOTE: When attaching a side panel as shown below, you may need to push on the back panel to align it
with the groove in the side panel.
to the Upper Shelf Panel (5) and Lower Shelf Panel (6). Tighten the four Cams (B) clockwise and then cover
them with Cam Caps (E).
Slide in one Back Panel (9) with the nished side facing inside the cube. Note that the panels are not
square. The long side should meet with the groove of Center Panel Middle (8).

8 OF 11
Step 9:
Step 10:
75
6
8
7
1
2
75
6
8
7
1
9
2
Part # B x 4pcs
Part # E x 4pcs
clockwise and then
Slide in one Back Panel (9) with the nished side facing inside the cube. Note the orientation of the long
and short sides in the drawing below.
cover them with Cam Caps (E).

9 OF 11
Step 11:
Step 12:
1
1
9
4
4
2
2
5
5
7
7
8
7
8
7
9
6
6
Use six CSK Screws (D) to attach the Bottom Panel (4) to Side panel Left (1), Side panel Right (2) and
Center Panel Bottom (7). Make sure that the groove in the Bottom Panel (4) is aligned with the Back Panel (9).
Part # D x 6pcs
Note the orientation of the sides in the
drawing.

10 OF 11
Step 13:
1
3
4
2
5
7
8
7
6
Part # B x 6pcs
Part # E x 6pcs
Attach the Top Panel (3) to the Side Panel Left (1), Side Panel Right (2) and Center Panel Top (7). While
clockwise and then cover them with Cam Caps (E).

•
•
•
•
11 OF 11
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product mo sure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity is de
10 pounds for the shelves and 40 pounds for the top panel. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or email us at: [email protected]
MODEL: 50-612ES
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
www.comfortproducts.net
[email protected]
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
OneSpace is a Trademark of Comfort Products, Inc.
™