Onespace Eleanor 50-1617CH User manual

ASSEMBLY INSTRUCTIONS
MODEL 50-1617CH
SUPPLIER CODE: SPRG
Eleanor Executive Desk w/Hutch, USB & Charger Hub, Golden Cherry
For fastest service on claims, requests for replacment parts,
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
or questions, please visit our website at:
OneSpace is a Trademark of Comfort Products, Inc.
™

ASSEMBLYOVERVIEW
2 of 16
Desktop maximum
weight capacity
= 132 lbs
Drawers maximum
weight capacity
= 20 lbs
Hutch maximum
weight capacity
=22 lbs

#
DESCRIPTION
STOCK #
QTY.
1 Left Corner
Board, Front
51-1617CHA 1
2Left Board 51-1617CHB1
3 Left Corner
Board, Back
51-1617CHC1
4
Trim Board 51-1617CHD2
5Right Corner
Board, Front
51-1617CHC1
6 Right Board 51-1617CHE1
7 Right Corner
Board, Back
51-1617CHA1
8 Back Board 51-1617CHF1
9Center Board 51-1617CHG1
10
Support Board 51-1617CHH1
3 of 16
PARTSLIST1OF3 (50-1617CH)
THE PART NUMBER CAN BE FOUND ON THE SIDE OF THE PART, EITHER STAMPED OR ON A STICKER.
ITEMS ARE NOT SHOWN TO SCALE.

#
DESCRIPTION
STOCK #
QTY.
11 Desktop 51-1617CHDT 1
12 Hutch Back 51-1617CHJ1
13 Hutch Shelf 51-1617CHK1
14
Hutch Left
Board
51-1617CHL1
15
Hutch Right
Board
51-1617CHM1
16 Hutch Middle
Board
51-1617CHN2
17 Medium Drawer,
Front Board
51-1617CHO1
18 Drawer Left
Board
51-1617CHP2
19 Drawer Right
Board
51-1617CHQ2
20
Medium Drawer,
Back Board
51-1617CHR1
4 of 16
PARTSLIST2OF3 (50-1617CH)
THE PART NUMBER CAN BE FOUND ON THE SIDE OF THE PART, EITHER STAMPED OR ON A STICKER.
ITEMS ARE NOT SHOWN TO SCALE.

PARTS LIST 3 OF 3 (50-1617CH)
THE PART NUMBER CAN BE FOUND ON THE SIDE OF THE PART, EITHER STAMPED OR ON A STICKER.
ITEMS ARE NOT SHOWN TO SCALE.
 
 
 

 

 
 

 

 

 

 

  Le �o 

  
Le
 
 
0



C




   Right

 Right
   �

5 of 16
§ 

  ""
 0�
 
 
 
 
 
 
 
 
 
 
 
 

 

6 of 16
PART DESCRIPTION QT Y.
A Bolt 54
F1 M4 x 22MM 4
I
Plastic Grommet 1
J
Large Handle 2
B2 22
IF YOU ARE MISSING ANY OF THESE PARTS,
OR IF YOU HAVE A DAMAGED PART, PLEASE
VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF
THIS MANUAL. SIMPLY COMPLETE THE INFORMATION,
INCLUDING THE PART YOU NEED. THE PART WILL
NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED .
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE A SCREWDRIVER BEFORE YOU BEGIN ASSEMBLING
(NOT INCLUDED).
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE A POWER DRILL.
HARDWARE LIST (50-1617CH)
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
HARDWARE KIT
STOCK # 51-1617CHHA
C
K
Dowel
Sticker
20
B1 Large Cam
Small Cam
32
D M4 x 14MM 26
E M5 x 40MM 12
F2 M4 x 18MM 1
G Nut 4
H Small Handle 1
24
Extra Hardware (A - G) 1 set

DX12
Refer to the drawings for which holes in the rollers to use.
Insert twenty Dowels (C) into the boards shown below.
7of 16
(50-1617CH)

8 of 16
ASSEMBLY INSTRUCTIONS (50-1617CH)
STEP 3
Fix eighteen Bolts (A) to the Boards shown below.
Insert twelve Large Cams (B1) into the Left (2) and Right (6) Boards. Make sure the arrows are pointing toward the holes where
the bolts go in.
Attach the Left Corner Boards, Front (1) and Back (3) to the Left Board (2) and one Trim Board (4) by inserting the
Bolts and turning the Cams clockwise half a turn to lock into place. At the same time, insert the dowels of the Trim Board (4)
into the holes of the Front and Back Boards.
Attach the Right Corner Boards, Front (5) and Back (7) to the Right Board (6) and the other Trim Board (4) in the same way.
STEP 4
30 Right
30 Left
2
1
3
5
6
7
5
6
7
4
30 Left
30 Right
A x 18
B1 x 12
1
2
3
44
PLACE PART 4 ON THE
OPPOSITE SIDE
CAUTION:
Do not overtighten
cams.
A
B1

Fix two Bolts (A) to the Back Board (8). Insert two Large Cams (B1) into the
ASSEMBLY INSTRUCTIONS (50-1617CH)

10
10
shown. Align the Bolts in the Desktop (11) with the holes and the Dowels in
the lower part of the desk. Lower the Desktop making sure all Bolts and
Fix ten Bolts (A) to the underside of the Desktop (11).
ten
ASSEMBLY INSTRUCTIONS (50-1617CH)

11 of 16
ASSEMBLY INSTRUCTIONS (50-1617CH)
STEP 9
Fix one Bolt (A) to the center of the Hutch Back (12). Insert the Grommet (J) into the round hole.
Insert the USB, Charger Hub (29) into the opening and fasten it with two Screws (D).
Insert a Small Cam (B2) into the Hutch Shelf (13). Attach the Hutch Back (12) to the Hutch Shelf by inserting the Bolt and
tightening the Cam. Attach the two Hutch Center Boards (16) to the underside of the Shelf (13) by aligning the Dowels
with the holes and pressing the boards together until tight.
STEP 10
12
12 13
12 13
16
16
B2
J
A x 1
B2 x 1
12
D x 2

Fix eight Bolts (A) to the Hutch Right (15) and Left (14) Boards. Insert eight Small Cams (B2) into the Hutch Back (12) and
ASSEMBLY INSTRUCTIONS (50-1617CH)

13 of 16
ASSEMBLY INSTRUCTIONS (50-1617CH)
STEP 13
Fix two Bolts (A) to the Medium Drawer Front (17), four Bolts to the
Large Drawer Front (25), and two Bolts to the Small Drawer Front (22).
Insert one Small Cam (B2) into the
Drawer Right Board (19) and one into
the Drawer Left Board (18). Making sure
the grooves are aligned, attach the
Medium Drawer Front (17) to the Right
and Left Boards by inserting the Bolts and
tightening the Cams.
Slide Drawer Bottom A (21) into
the grooves. Align the groove in
the Medium Drawer Back (20) with
the Drawer Bottom and fasten it to
the Right (19) and Left (18) Drawer
Boards using four Screws (E).
Attach the Small Handle (H) to the
Drawer Front (17) using one Screw (F2).
STEP 14
A
18
19
17
20
21
18
19
17
17
A x 8
B2 x 2
H x 1
F2 x 1
E x 4

14 of 16
Insert one Small Cam (B2) into the
Drawer Right Board (19) and one
into the Drawer Left Board (18).
Making sure the grooves are aligned,
attach the Small Drawer Front (22) to
the Right and Left Boards by inserting
the Bolts and tightening the Cams.
ASSEMBLY INSTRUCTIONS (50-1617CH)
STEP 15
Insert two Small Cams (B2) into the Large Drawer Right (27) and two into the
Large Drawer Left (26). Making sure the grooves are aligned, attach the
Large Drawer Front (25) to the Right and Left Boards by inserting the Bolts
and tightening the Cams.
Slide Drawer Bottom B (24) into the grooves. Align the groove in the
Large Drawer Back (28) with the Drawer Bottom and fasten it to the
Right (27) and Left (26) Boards using four Screws (E). At the same time,
insert the File Holders (32) into the holes at the top of the Front and
Back Boards.
STEP 16
22
18
19 23
24
22 22
19
18
F1
25
26
27
28
24
32
25
26
27
B2 x 4
G x 2
F1 x 2
B2 x 2
Attach a Large Handle (I) to the Drawer Front (22)
using two Screws (F1) with two Nuts (G).
F1
G
G
G x 2
F1 x 2 Ix 1
E x 4
E x 4
Slide Drawer Bottom B (24) into the
grooves. Align the groove in the
Small Drawer Back (23) with the Drawer
Bottom and fasten it to the Right (19)
and Left (18) Boards using four Screws (E).
Attach a Large Handle (I) to the
Drawer Front (22) using two
Screws (F1) with two Nuts (G).
Ix 1

Flip over the assembled drawer and attach a
ASSEMBLY INSTRUCTIONS (50-1617CH)

•
•
•
•
16 OF 16
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
www.comfortproducts.net
email: [email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product mo sure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity of the desktop is
132 pounds, the weight capacity of the drawers is 20 pounds, and the weight capacity of the hutch is 22 pounds. For claims or questions
concerning this warranty, please visit: www.comfortproducts.net or email us at: [email protected]
MODEL: 50-1617CH