Onespace JNFF User manual

LOFT WRITING DESK WITH STEEL FRAME, WOOD SURFACE
ASSEMBLY INSTRUCTIONS
MODEL 50-JN16DSK
SUPPLIER CODE: JNFF
OneSpace is a Trademark of Comfort Products, Inc.
™

2
Desktop maximum
weight capacity
=
150 lbs

HARDWARE KIT
STOCK # 51-JN16DSKHA
PART DESCRIPTION QTYSTOCK NO
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT
WWW.COMFORTPRODUCTS.NET/SUPPORT REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL.
SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART WILL NORMALLY
BE SHIPPED WITHIN 48 HOURS.
151-JN16DSKDFDesktop Frame1
4
51-JN16DSKLGLeg
2
1
51-JN16DSKDTDesktop3
1
51-JN16DSKBBBack Support Bar4
2
51-JN16DSKSBSide Support Bar5
4
51-JN16CACaster6
PART DESCRIPTION QTY
PARTS AND HARDWARE LIST
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
Extra Hardware Pack
M6X15MM
M6X20MM
M6X40MM
Allen Wrench
A
B
C
16
4
4
M6X12MMD 4
E1
1
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE A POWER DRILL.
3

4
ASSEMBLY INSTRUCTIONS
STEP 2
(i) Align the side support bars (5) with the legs (2).
(ii) Fasten them with four screws (A) and four screws (B).
(iii) Fasten the back support bar (4) to the side bars using four screws (C).
STEP 1
Attach the legs (2) to the desktop frame (1) using eight screws (A).
A x 8
A x 4
B x 4
C x 4
i ii iii
A
A
2
B
B
C
NOTE: Some of the screws are of similar length. Observe carefully which screw is needed before beginning each step.
4
2
A
1
5
E
E

5
ASSEMBLY INSTRUCTIONS
STEP 3
Attach the assembled frame to the desktop (3) with four screws (D) using the brackets on the desktop frame (1).
STEP 4
Screw a caster (6) into the bottom of each leg.
D x 4
3
6
E