Onespace 50-JN110400 User manual

ULTRAMODERN GLASS L-SHAPE DESK
ASSEMBLY INSTRUCTIONS
MODEL # 50-JN110400
SUPPLIER CODE: JNFF
OneSpace is a Trademark of Comfort Products, Inc.
™
ASSEMBLY INSTRUCTIONS

G
I
H
H
E
D
DF
M
M
D
D
B
B
A
A
A
A
J
C
K
K
L
L
N
N
N
N
N
N
NN
mumixampotelbaT
weight capacity
=
88lbs
=
30lbs
2 OF 9
Keyboard tray
maximum weight
capacity

HARDWARE KIT
STOCK # 51-JN1104HA
PART DESCRIPTION QTY
STOCK NO
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT.
REFERENCE THE MODEL # ONTHE FRONT OFTHIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED.
THE PART WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
4
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
51-JN110400LG
Leg
A
2
51-JN110400LC
Lower crossbar
B
1
51-JN110400TF
Keyboard tray frame
C
4
51-JN110400UC
Upper crossbar
D
1
51-JN110400CF
Corner frame
E
51-JN110400TSR
Keyboard tray support
F
PART DESCRIPTION QTY
STOCK NO
51-JN110400CG
Corner glass
I
51-JN110400TG
Keyboard tray glass
J
K
M
PART DESCRIPTION QTY
PARTS AND HARDWARE LIST (50-JN110400)
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
51-JN110400LB
Long bar for CPU stand
2
51-JN110TS
Keyboard tray Slider
N
51-JN110400TSL
Keyboard tray support
G
2
51-JN110400GL
Glass
H
51-JN110400SB
Short bar for CPU stand
M4X12MM
Allen Key
Extra Hardware Pack
(1-5)
Small rubber suction cups
1
1
M6X35MM
Large rubber suction cups
M6X55MM
1
2
3
4
5
6
20
12
4
8
4
L
M8 foot 51-JN110FT 12
1
1
2
2
Right
Left
3 OF 9
1
1

ASSEMBLY INSTRUCTION (50-JN110400)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 1
A
N
N
STEP 2
1Pcs
4 OF 9
Attach Feet (N) to Legs (A).
1
N
6
To assemble CPU stand, attach Long Bars (L) to Short Bars (K) using four Screws (1).
Attach four Feet (N) to Long Bars (L).

STEP 3
STEP 4
444
4
4
GF
MM
1
1
1
1
1
D
D
Pcs
Pcs
1Pcs
1
1
1
1
6
D
D
B
A
5 OF 9
Attach assembled section and Lower Crossbar (B) to Leg (A) using two Screws (1).
Make sure leg and sliders are oriented as shown.
ASSEMBLY INSTRUCTION (50-JN110400)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
Attach a Keyboard Tray Slider (M) to Keyboard Tray Support Right (F) and Keyboard Tray Support Left (G)
using four Screws (4). Attach Keyboard Tray Support Right (F) and Keyboard Tray Support Left (G)
to Upper Crossbar (D) using four Screws (1). Make sure holes for suction cups are facing up.

STEP 5
1Pcs
3Pcs
2
2
3
3
E
D
D
B
A
6
1
STEP 6
D
D
3
3
B
A
1
6
1Pcs
3Pcs
2
2
6 OF 9
Attach Corner Frame (E) to Leg (A) and Upper Crossbars (D) using two Screws (3).
Attach Leg (A) to Lower Crossbar (B) using two Screws (1).
Attach Upper Crossbars (D) and leg to Corner Frame (E) using two Screws (3).
Attach Lower Crossbar (B) to leg using two Screws (1).
ASSEMBLY INSTRUCTION (50-JN110400)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED

STEP 7
STEP 8
D
D
A
B
14 Pcs
1
1
1
1
C
4
44
4
44 Pcs
7 OF 9
Attach Leg (A) to Upper Crossbars (D) and Lower Crossbar (B) using four Screws (1).
Attach Keyboard Tray Frame (C) to slides using four Screws (4).
ASSEMBLY INSTRUCTION (50-JN110400)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED

STEP 9
STEP 10
212 Pcs
H
2
2
222
22
2
2
2
2
2
H
I
54 Pcs
8 OF 9
Attach Large Rubber Suction Cups (2) to top of frame.
Place three glass pieces (H & I) onto the suction cups.
Attach Small Suction Cups (5) to tray frame.
Place Keyboard Tray Glass (J) onto suction cups.
J
5
ASSEMBLY INSTRUCTION (50-JN110400)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED

9 OF 9
JN110400. MADE IN CHINA
SAFETY AND MAINTENANCE
• DO NOT stand on the desk. Do not use the desk as a stepladder.
•
• Every 6 months, check all bolts and screws to ensure they are tight.
• This product is California 93120 Compliant for Formaldehyde.
LIMITED WARRANTY
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for
1 year. This warranty is made by Comfort Products only to the original end-user customer acquiring
the product directly from Comfort Products’ authorized dealers as shown by the original sales receipt.
The end-user customer remedy pursuant to this warranty is limited to repair or replacement of parts
at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right
to require damaged parts to be returned to Comfort Products upon request. Consent from Comfort
Products must be obtained before any warranty work is performed. This warranty shall not apply to any
products which must be replaced because of normal wear and tear, negligence, abuse, or“accident”.This
warranty applies under conditions of normal use and is
not subject to defects caused by improper
of transportation or labor. In no event shall Comfort Products be liable in either tort or contract for any
loss or direct, special, incidental, consequential or exemplary damages. This Limited Warranty is NOT
applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies
only to end-user customers in the United States. All warranties are limited to the original purchaser
for normal use. The weight capacity of the tabletop is 88 pounds and the capacity of the keyboard tray
is 30 pounds. For claims or questions concerning this warranty, visit www.comfortproducts.net/support
or e-mail us at [email protected].
Comfort Products, Inc.
P.O. Box 999
Memphis, TN 38101
www.comfortproducts.net
[email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™