Onespace 50-7011ES User manual

MODEL 50-7011ES
SUPPLIER CODE: PMEX
ASSEMBLY INSTRUCTIONS
OneSpace is a Trademark of Comfort Products, Inc.
™
Large Writing Desk
For fastest service on claims, requests for replacement parts, or
questions, please visit our website at

2 OF 8
Desktop maximum
weight capacity
=100lbs

3 OF 8
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.

4 OF 8
Bo De
Fix two Wood Dowels (1) to Back Panel (D).

Screw Left Side Panel (A) to Back Panel (D) with two Unitar Screws (3) using predrilled holes.
Screw Right Side Panel (A) to Back Panel (D) with two Unitar Screws (3) using predrilled holes.

Using arubber mallet, fasten Nail Leg Studs (4)
to the bottomof Left Panel (A) and Right Panel (B).
Then, using a screw driver, turn the Cams clockwise half a turn tolock into place.

Place screw caps and cam caps over their respective parts.

•
•
•
•
8 OF 8
DO NOT stand on the desk. Do not use the desk as a stepladder.
DO NOT use the desk unless all bolts and screws are firmly secured.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
P.O. Box 999
Memphis, TN 38101
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
www.comfortproducts.net
[email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is
made by Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ autho-
rized dealers as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair
or replacement of parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to
require damaged parts to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained
before any warranty work is performed. This warranty applies under conditions of normal use and is not subject to defects
caused by improper assembly or disassembly; defects occurring after purchase due to product modification, intentional
damage, fire, misuse, negligence, or exposure to the elements; labor or assembly cost. This warranty does not cover the cost of
transportation or labor. In no event shall Comfort Products be liable in either tort or contract for any loss or direct, special,
incidental, consequential or exemplary damages. This Limited Warranty is NOT applicable to end-user customers who use
Comfort Products for rental purposes. This warranty applies only to end-user customers in the United States. All warranties are
limited to the original purchaser for normal use. The weight capacity for the desktop is 100 pounds. For claims or questions
concerning this warranty, please visit www.comfortproducts.net or email us at [email protected]
MODEL: 50-7011ES