Oregon Scientific RMR802 User manual

EN
10
Solar Indoor and Outdoor Thermometer with RF Clock
Model:RMR802 / RMR802A
USER MANUAL

EN
1
Solar Indoor and Outdoor
Thermometer with RF Clock
Model:RMR802 / RMR802A
USER MANUAL
CONTENTS
Overview .....................................................................2
Front View ..............................................................2
Back View ..............................................................2
Remote Sensor .......................................................3
Getting Started ...........................................................3
Solar Panel..............................................................3
Insert Batteries ........................................................3
Remote Sensor...........................................................3
Sensor Data Transmission...................................... 4
Clock ...........................................................................4
Clock Reception ......................................................4
Manually Set Clock .................................................5
Temperature ...............................................................5
Ice Warning .............................................................6
Reset...........................................................................6
Precautions................................................................6
Specifications ............................................................7
About Oregon Scientific ...........................................7
EU-Declaration of Conformity ..................................7
FCC Statement...........................................................8
Declaration of Conformity........................................8

EN
2
OVERVIEW
FRONT VIEW
2
1
3
7
9
10
8
11
4
5
6
1. Solar panel
2. Remote sensor reception indicator
3. Clock signal reception indicator
4. Indoor temperature
5. MODE:Change settings / display
6. / :Increase / decrease value; activate /
deactivate clock reception signal; : toggle
between outdoor channels (1-3)
7. Outdoor temperature
8. Time zone (RMR802A only)
9. Clock with weekday
10. MEM: View current, maximum and minimum
temperature
11. Ice alert LED indicator
BACK VIEW
2
1
3

EN
3
1. RESET:Reset unit to default settings
2. EU / UK:Select the nearest radio signal (RMR802
only)
3. °C / °F:Select temperature unit
REMOTE SENSOR
1
2
34
5
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. CHANNEL switch
GETTING STARTED
SOLAR PANEL
The solar panel is an energy saving feature, which is an
environmentally friendly way to provide additional power
to the main unit and prolongs battery life. However, it
cannot replace battery power entirely.
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
LOCATION MEANING
Clock / alarm Main unit batteries low
Outdoor temperature Sensor batteries low
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment.
2. Insert the battery, matching the polarities.
3. Select a channel then press RESET.
4. Close the battery door.
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 m (5 ft) and which can shield it from direct
sunlight or wet conditions for an accurate reading.

EN
4
1.5 m (5 ft)
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold + MODE.
The sensor reception icon in the remote sensor area
shows the status:
ICON DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be
found.
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
RMR802:
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.

EN
5
RMR802A:
• WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
Press and hold to enable or to disable signal
reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.If
signal reception is unsuccessful, place your unit next
to a window, press and hold to force another signal
search.
Clock signal reception indicator:
STRONG
SIGNAL
WEAK / NO
SIGNAL
MANUALLY SET CLOCK
To set the clock manually, disable the signal reception
first.
1. Press and hold MODE.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
RMR802: Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
RMR802A: Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
NOTE The language options are English (E), German
(D), French (F), Italian (I), Spanish (S) and Russian
(R).
To select display mode:
Press MODE to choose between clock with seconds,
clock with weekday or calendar.
TEMPERATURE
To toggle temperature unit:
Press °C / °F.
To toggle between each outdoor sensor’s readings:
Press repeatedly.
OR
Press and hold + MEM for 2 seconds to initiate auto
toggle of outdoor channels.
To end press .
To toggle between current, minimum and maximum
records:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.

EN
6
ICE WARNING
If the sensor falls between 3°C to -2 °C (37°F to 28°F),
the green LED indicator will flash, and will stop flashing
once the temperature is out of this range.
NOTE As ice alert is only applicable to channel 1,
to prevent flashing of LED, select channel 2 or 3 on
outdoor sensor.
RESET
Press RESET to return to the default settings.
PRECAUTIONS
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
• Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
• Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not tamper with the unit’s internal components.
This invalidates the warranty.
• Only use fresh batteries. Do not mix new and old
batteries.
• Images shown in this manual may differ from the
actual display.
• When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
• Placement of this product on certain types of
wood may result in damage to its finish for which
Oregon Scientific will not be responsible. Consult
the furniture manufacturer’s care instructions for
information.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
• Please note that some units are equipped with
a battery safety strip. Remove the strip from the
battery compartment before first use.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
NOTE Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.

EN
7
SPECIFICATIONS
TYPE DESCRIPTION
MAIN UNIT
L x W x H 75 x 33 x 120 mm
(2.95 x 1.30 x 4.72 in)
Weight 112 g (3.95 oz)
without battery
Temperature range -5°C to 50°C
(23°F to 122°F)
Signal frequency 433 MHz
Power 2 x UM-4 (AAA) 1.5 V
batteries
REMOTE UNIT (THN132N)
L x W x H 96 x 50 x 22 mm
(3.78 x 1.97 x 0.87 in)
Weight 62g (2.22 ounces)
Transmission range 30m (98 ft) unobstructed
Temperature range -20°C to 60°C
(-4°F to 140°F)
Power 1 x UM-3 (AA) 1.5 V
batteries
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn
more about Oregon Scientific products.
If you’re in the US and would like to contact our
Customer Care department directly, please visit: www2.
oregonscientific.com/service/support
For international inquiries, please visit: www2.
oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Solar
Indoor and Outdoor Thermometer with RF Clock (Model:
RMR802 / RMR802A) is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. A copy of the signed and dated Declaration
of Conformity is available on request via our Oregon
Scientific Customer Service.
COUNTRIES RTTE APPROVAL COMPLIED
All EC countries,Switzerland CH
and Norway N

EN
8
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please visit our website at www2.
oregonscientific.com/service for all enquiries.
We
Name: Oregon Scientific, Inc.
Address: 19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No.: RMR802 / RMR802A
Product Name: Solar Indoor and Outdoor Thermometer
with RF Clock
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,Phase 1,41
Man Yue St., Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference

ES
1
Solar termómetro interior y exterior
con hora atómica
Modelo: RMR802 / RMR802A
MANUAL DE USUARIO
CONTENIDOS
Resumen.....................................................................2
Vista Frontal ............................................................2
Vista Trasera........................................................... 2
Sensor Remoto .......................................................3
Para Empezar .............................................................3
Panel Solar ............................................................. 3
Cómo Introducir Las Pilas ....................................... 3
Sensor Remoto ..........................................................3
Transmisión de datos del sensor ............................4
Reloj ............................................................................5
Recepción del reloj.................................................. 5
Ajuste Manual Del Reloj.......................................... 5
Temperatura ...............................................................6
Aviso De Hielo......................................................... 6
Reinicio....................................................................... 6
Precaucion..................................................................6
Ficha Técnica .............................................................7
Sobre Oregon Scientific............................................ 7
EU-Declaración De Conformidad ............................. 8