Owon SPD 3100 User manual

SPD 3100
Pet Water Fountain
Quick Start Guide

WARNING: Failure to follow these safety notices could result in 󽘀re,
electric shock or other injuries. Read all the safety notices below
before use.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to 󽘁ammable liquids,
gases or other explosives.
• Ensure that the water level in the water tank is not lower than the
minimum water level and not higher than the maximum water level.
• Please replace the 󽘀lter once a month to ensure the 󽘀ltration e󽗿ect.
• If the pump becomes noisy after a period of time use, please
remove the pump and clean it.
Safety Notice

Technical Speci󽘀cations
Hopper Capacity • 1.4 L
Power • DC 5V 1A
• USB
Material • ABS Plastic
Dimension • 163x164x160 mm
N. W. • 0.5KG

In the Box1
Please check the condition and the accessories of the water fountain
after you open the box.
• Pet Water Fountain x 1
• Filter Cotton x 1
• USB cable x 1
• Quick Guide x 1

2Get to know your device
Light Status
Blue light is always on Normal
Red light 󽘁ashes Water shortage alarm
Red light is always on Stopped
LED indicator
Head Cover
Filter
Top Cover
Pump
Pipe
Water Tank
Flower

3Get Started
3.Route the USB cable through
the built-in cable hole in the
bucket.
1. Fix one end of pipe on the
pump.
2.Fix the other end of the pipe to
the lower end of the top cover.
4. Ensure the water level between
the minimum water level and the
maximum water level
MAX
MIN
MAX
MIN

6.Place the 󽘀lter in the slot in
the top cover（Wet the 󽘀lter
before using it）
7. Tighten the cover in the clockwise
direction
8.Install the 󽘁ower and switch
on the power supply.
5. Fix the top cover on the water
tank.