Owon SPF2000-W-TY User manual

SPF2000-W-TY Smart Pet Feeder
Quick Start Guide

Preface
Quick start by the following steps:
• Make sure the Wi-Fi indicator is rapidly blinking. If not, please reset
the network con󽗉guration.
• Open your App, then click the '+' button at the top right corner of the
App to add devices.
• Select 'Pet Feeder' to add manually the Pet Feeder in "Small Home
Appliances" list.
APP Download:
1. Scan the QR Code behind the Pet Feeder with your smartphone.
2. Search 'Smartlife' APP from App store.

Safety Notice
WARNING: Failure to follow these safety notices could result in 󽗉re,
electric shock, other injuries, or damage to the Smart Pet Feeder and
other property. Read all the safety notices below before using the
Smart Pet Feeder.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to 󽗊ammable liquids, gases
or other explosives.
Hopper Capacity • 7.5L
Microphone • 10 meters, -30dBV/Pa
Speaker • 8 Ohm 1w
Power • DC power cord
• Backup batteries: 3 x D cell
Dimension • 230 x 230 x 500 mm
N. W. • 3.76 kg
Power Consumption • 0.8 W
Color • White
Technical Speci󽗉cations
In the box
Pet Feeder x 1; Power Adapter x 1; Quick Guide x 1; Cord Hose Protector x 1;
Stand x 1
Please check the condition and the accessories of pet feeder after you
open the box.

Welcome
1
The Smart Pet Feeder allows you to feed remotely or apply schedules
for automatic feeding. With the voice recording function, it will loop
your voice 3 times when the food is delivered.
This guide will provide you with an overview of the product and help
you get through the initial setup.
• Wi-Fi Remote control -Tuya APP smartphone programmable
• Voice record & playback
• Automatic & manual feeding -built buttons for manual control
• Accurate feeding - per day
• 7.5L food capacity -7.5L large capacity
• Dual power protective -Battery backup, continuous operation during
power failure
Features:
Tips:
Recommend food size between
5 mm – 15 mm.

Wi-Fi indicator
The Wi-Fi status gives the following information:
Wi-Fi Status What it means
Flashing Pet Feeder has not joined the Internet.
Steady light Pet Feeder has joined the Internet.
Fault indicator lamp
The Fault indicator 󽗊ashes when one of the following happens:
• Network situation: the Pet Feeder cannot connect to the cloud
• Feeding situation: there is no food come out, or food doesn't come
out correctly.
Tips:
When entering the recording state, the fault indicator will always
be on, and then exit the recording state to restore the fault
indication.
2Get to know your device
Cover
Buttons (Open the cover)
Microphone
Wi-Fi indicator
Fault indicator lamp
Food outlet
Bowl

• Battery box
3 x D-size batteries. Please pay attention to the polarity. Please note
that the battery charging is for backup purpose only. If you wish to
control the pet feeder remotely, power supply is needed.
Battery box
Speaker
Power switch
Power jack
• Speaker
Play sound.
• Power switch
— for ON, ○ for OFF.
• Power jack
Use the supplied power
adapter.
Voice record
Press once to enter/exit the recording. The longest recording
time is 10S.
Play back
Press once to play/stop playing the voice record.
Feed / Reset network con󽗉guration
Press once to manually feed once in 1 portion.
Hold the button for 6 seconds, The WIFI indicator rapidly
blinking to reset the network information.
Button Introduction:
Voice record
Play back
Scan the QR Code to
download APP.
Feed / Reset network
con󽗉guration

To get started, you will need:
• A Wi-Fi network.
• A mobile phone with a mobile APP installed.
Then follow the steps below:
1. Power on the Smart Pet Feeder.
2.Make sure the Wi-Fi indicator lamp is rapidly blinking. If not, please
reset the network con󽗉guration.
3Get started
1. Open your App
2. Login with an existing account. If you are a new user, you need to
create an account at 󽗉rst
3. Please click the '+' button at the top right corner of the App to add
devices
4.Select 'Pet Feeder' to add manually the Pet Feeder in "Small Home
Appliances" list
3.1 Add devices

5. Confirm your Wi-Fi indicator is rapidly blinking. Then enter your
home Wi-Fi account and password(Only support 2.4Ghz Wi-Fi)
6. Place the router, mobile phone, and Pet Feeder as close as possible
7. Waiting for connection
8. After the device has been added, you can use to rename the
device.

3.2 App Overview:
Home:
1.Device list
You can check the added device, tap one to enter control board
2. Location information
Information about your local weather conditions, outdoor
temperature, PM
3.Home management
Add or delete home and manage home names, rooms, locations, and
members
4.Room management
Manage room. You can create rooms and assign devices to each room
5.Voice control (Temporarily not available on App)
Smart: Create smart scene and add automatic function(Temporarily
not available)
Me: App settings and FAQ about the app
Home management
Device List
Add Device
Voice Control Location
Information
Room
Management

Control board:
Select the target Pet Feeder in device list then enter the control board
•Automatic feed
Tap to edit the schedule for the automatic feed. Timer tolerance may
be about 30 seconds.
•Manually feed
Tap to feed manually. The maximum number of portion is 20 at a
time.
Automatic feed
Total portion
Device settings
Manually feed
Feeding records
Add schedule for
automatic feed

4
Align the stand with the hole at the bottom. Gently push the stand into
the hole at the bottom.
1.How do I install the stand
FAQ