Owon SPF2200-V-TY User manual

SPF2200-V-TY Smart Pet Feeder
Quick Start Guide

Safety Notice
WARNING: Failure to follow these safety notices could result in 󽘀re,
electric shock, other injuries, or damage to the Smart Pet Feeder and
other property. Read all the safety notices below before using the
Smart Pet Feeder.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to 󽘁ammable liquids, gases
or other explosives.
Technical Speci󽘀cations
Hopper Capacity • 5 L
Auto Feeding Time • 1-10 meals per day
Power
• DC power cord
• Backup batteries: 3 X D cell
batteries (or 1 X 18650 type Li-
ion battery)
Camera Resolution • 1920 x1080
Buletooth • BLE 4.2
Dimension • 221(L) x 383(W) x 338(H) mm
N. W. • 1.55 kg
Power Consumption • 1.7 W
Color • White

Welcome
1
The Smart Pet Feeder allows you to feed remotely or apply schedules
for automatic feeding. With the voice recording function, you can even
interact with your pets using voice from your mobile phone when
you're not home.
This guide will provide you with an overview of the product and help
you get through the initial setup.
• Wi-Fi Remote control -Tuya APP smartphone programmable.
• HD camera - real time interaction
• Camera recording & playback
• Automatic & manual feeding
• Accurate feeding -Schedule up to 8 feeds per day
• Voice interaction through the feeder
• Dual power protective -Battery backup, continuous operation during
power or internet failure
Features:

APP Download:
Tips:
Please check the condition and the accessories of pet feeder after you
open the box.
1. Scan the QR Code behind the Pet Feeder with your smartphone.
2. Search 'Smartlife' APP from App store.
Recommend food size between 5 mm – 15 mm.
In the box
• Pet Feeder x 1
• Power Adapter x 1
• Quick Guide x 1
• Cord Hose Protector x 1
2

Indicator
The indicator statu gives the following information:
Indicator Status What it means
Blue light 󽘁ashes slowly The device is being connected to the
network or is o󽘃ine.
Blue light normally on Device has connected to the cloud.
Red light 󽘁ashes rapidly Food stuck/Low battery
Red light 󽘁ashes slowly Food shortage
Green light 󽘁ashes slowly Only powered by batteries
3Get to know your device
Food Bowl
WIFI Button
Cover
Feeding Button
Outlet
Camera
Note：The device will be disconnected automatically
when the battery is powered, and the camera function is
unavailable!

Battery box
3 x D-size batteries ( or 1 x 18650 Li-ion ). Please pay attention to the
polarity. Please note that the battery charging is for backup purpose
only. If you wish to control the pet feeder remotely, power supply is
needed.
Speaker
Play sound.
Power switch
— for ON, ○ for OFF.
Power jack
Use the supplied power adapter.
Battery box
Speaker
Power switch
Power jack

Feeding Button
Short press: Supply one portion ( 1 portion=15g )
Long Press: Suppy food continuously
Wi-Fi Button
Hold down the button for 5 seconds and release it. After hearing a beep,
wait for the device to restart automatically. When the blue indicator
blinks slowly, the network is reset and enters the configuration
state; when the blue indicator flashes rapidly, the network resetting
successfully.

To get started, you will need:
1. A Wi-Fi network.
2. A mobile phone with a mobile APP installed.
Then follow the steps below:
1. Power on the Smart Pet Feeder.
2.Make sure the blue LED is rapidly blinking. If not, please refer to
Chapter 3, Wi-Fi button instruction to reset the network con󽘀guration.
4Get started
1. Open your App
2. Login with an existing account. If you are a new user, you need to
create an account at 󽘀rst
3. Please click the '+' button at the top right corner of the App to add
devices
4.Select 'Smart Camera' in "Security&Sensors" list to add manually
the Pet Feeder
4.1 Add devices

5. Confirm your Wi-Fi indicator is rapidly blinking. Then enter your
home Wi-Fi account and password(Only support 2.4Ghz Wi-Fi)
7. Place the QR code in front of the feeder's camera to scan at a
distance of 15cm to 20cm. There will be a prompt sound when the scan
is successful. Tap 'I heard a prompt' to continue.
6. Tap 'Continue' to scan QR code on your mobile phone.

8. Place the router, mobile phone, and Pet Feeder as close as possible
9. Waiting for connection
10. After the device has been added, you can use to rename the
device.

4.2 App Overview:
Home:
1. Device list
You can check the added device, tap one to enter control board
2. Location information
Information about your local weather conditions, outdoor
temperature, PM
3. Home management
Add or delete home and manage home names, rooms, locations, and
members
4. Room management
Manage room. You can create rooms and assign devices to each room
5. Voice control (Temporarily not available on App)
Smart: Create smart scene and add automatic function(Temporarily
not available)
Me: App settings and FAQ about the app
Home management
Device List
Add Device
Voice Control
Location
Information Room
Management

On/O󽗿 the sound
Video De󽘀nition
Full screen
Device settings
Control board:
Select the target Pet Feeder in device list then enter the control board
- Screenshot
Press to save the current image of camera to the phone's photo gallery
- Talk
Press it to talk through the Feeder. There have 2 modes for you to
choose, "Two-way Talk" and "One -way Communication", you can
change the it under 'Device settings' -> 'Basic Function Settings' ->
'Talk Mode'
- Playback
Playback your record video on your SD card

- Schedule
Program time periods, cycle and portion to feed automatically. Timer
tolerance may be about +/- 30 seconds. It supports up to 10 schedules
can be set.
- Feed
Set portion to feed automatically via mobile phone.
- Alarm
Enable motion detection to get notification on your mobile when
something move within the camera's 󽘀eld
NOTE: Only Android phones support "Photo album"!

5. FAQ:
How to install the 18650 battery:
Note: Both the battery and the battery box of 18650 need to be
purchased separately
1. Get a battery box with 18650 battery, like 󽘀gure 1.
2. Place the feeder horizontally in front of the body, then put the
battery box into the battery slot according to the direction shown in
the 󽘀gure 2, and then push it forward to 󽘀x it.
Push forward
Figure 2
Figure 1
How to remove and install the barrel:
- How to remove the barrel:
1. Please 󽘀x the white main body 󽘀rst, and then hold the black barrel
with both hands and lift it up, then the barrel can be disassembled
2. Please wipe it clean with a clean damp cloth.
Barrel
Main body

- How to install the barrel：
Please return the paddle in the barrel (as shown in the 󽘀gure below),
and then place the barrel on the main body according to the direction
when it was removed and press it down gently to 󽘀x the barrel.