Oxford Garden ESSEX User manual

15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
ESSEX CURVED BENCH  ”
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well
to remove the sawdust that may cause some staining.
NOTE: A hammer and a phillips head screwdriver (not provided) will be needed for the assembly of this bench.
Right Arm Assembly
Quantity: 1
Left Arm Assembly
Quantity: 1
AC
Phillip-Head Wood Screws
B
7
Right Corner Brace
Quantity: 2
8
Left Corner Brace
Quantity: 2
Dowels
Quantity: 36
Allen Head Screw
Quantity: 4
Back
Quantity: 1 (Right Shown)
Quantity: 1 (Left)
Center Brace Assembly
Quantity: 1
5
Seat
Quantity: 1 (Right Shown)
Quantity: 1 (Left)
6
Front Rail
Quantity: 1 (Right Shown)
Quantity: 1 (Left)
Quantity: 4
Bolts
Quantity: 2
D
Allen Wrench
Quantity: 1
E

Ver. 06.30.20
STEP 3
Place (left) front seat rail into position as shown.

Ver. 06.30.20
STEP 8
Secure the seat assemblies at each end by driving four
wood screws through the end brace on the underside of
the seat assemblies into the arm assemblies.