Oxford Garden L70K User manual

15 Kingbrook Parkway, Suite 100
Simpsonville, KY 40067
p. 877.866.3331 f. 502.719.8888
oxfordgarden.com
OXFORD CHAISE LOUNGE - L70K
ASSEMBLY
INSTRUCTIONS
Ver. 2019.06.03
COMPONENTS HARDWARE
Leg Assembly (Head)
Quantity: 1
1
Bolts
Quantity: 8
Allen Wrench
Quantity: 2
A
G
Hex Head Wrench
Quantity: 2
G
Cap Nuts
Quantity: 8
B
2
Chaise Lounge Frame
Quantity: 1
3
Leg Assembly (Foot)
Quantity: 1
4
Wheels
Quantity: 1
Axle Bolts
Quantity: 2
C
Large Washers
Quantity: 2
D
Small Washers
Quantity: 2
E
Hex Nuts
Quantity: 2
F
B
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a concrete
or tile patio, it should first be rinsed well to remove the
sawdust that may cause some staining.
NOTE: A hammer and a phillips head screwdriver (not
provided) will be needed for the assembly of this bench.

INSTRUCTIONS
STEP 1
On a clean flat surface, lay seat assembly flat on the
ground. Using 4 bolts, attach the back assembly
to the seat.
STEP 2
Carefully lay the chair on its side.Using three bolts, attach
one leg to the seat assembly. (Leg will be positioned
with the arm brace facing upward and to the front of the
seat assembly.) NOTE: Leave bolts slightly loose to help
with alignment of the sofa seat assembly.
Ver. 2019.06.03
4
3
A
STEP 3
Using two bolts, attach one arm to the leg and to the
brace on the back assembly. (Arched cutout of the arms
face inward.)
STEP 3 (detail)
STEP 4
Turn chaise to its upright position.
2