Panasonic HG-C Series User manual

Easy user guide
Please follow the procedure from step 1 to 5.
Adjust the height of the sensor.
1Mounting
HG-C measurement sensor
Example: HG-C1050-P
Adjusted height 50mm
Product No. Measurement
center distance and
measuring range
Analog output Cable length
Voltage
output
Current
output
HG-C1030-P 30±5mm 0 to +5V 4 to 20mA 2m
HG-C1030 30 ±5mm 0 to +5V 4 to 20mA 2m
HG-C1050-P 50 ±15mm 0 to +5V 4 to 20mA 2m
HG-C1050 50 ±15mm 0 to +5V 4 to 20mA 2m
HG-C1100-P 100 ±35mm 0 to +5V 4 to 20mA 2m
HG-C1100 100 ±35mm 0 to +5V 4 to 20mA 2m
HG-C1200-P 200 ±80mm 0 to +5V 4 to 20mA 2m
HG-C1200 200 ±80mm 0 to +5V 4 to 20mA 2m
HG-C1400-P 400 ±200mm 0 to +5V 4 to 20mA 2m
HG-C1400 400 ±200mm 0 to +5V 4 to 20mA 2m
M3 screws
(not included)
18mm
37mm
Mounting hole dimensions

2
3
Wiring
Remote zero-adjustment
Brown connect with 12 –24V DC ±10%
Blue connect with 0V DC
Press and hold the keys UP and DOWN simultaneously for 3 seconds
＋V
0V
External
input
Control
output
Analog voltage output (0-5 V)/
current output (4-20mA)
Analog ground (shielded)
Assign any one.
Teaching
Zero set
Trigger
Emission stop
Part description
UP key
TEACH key
Laser emission indicator (green)
Output operation indicator (orange)
Teaching indicator (yellow)
Zero set indicator (yellow)
DOWN key
PRO mode indicator (yellow)
Digital display (red)

4Measuring (analog)
IncorrectCorrect
Zero point setting
Measuring

5Limit teaching (digital)
Panasonic Electric Works Europe AG
Robert-Koch-Straße 100 • 85521 Ottobrunn
Tel: [phone] • Fax: [phone]
e-mail: [e-mail]
www.panasonic-electric-works.com
Do you need assistance?
Please contact our hotline: [phone].
Alternatively, send an e-mail to sensors.pe[email protected]
or contact one of our sales people.
a) Position sensor without objects
b) Press TEACH key once
c) Position object underneath the sensor
d) Press TEACH key once
If the limit teaching is successful, the
word "good" will appear on the display.