Panasonic KX-TGP600 User manual

1 of 2
comwave business care | [email protected] | 1-866-500-4107
Set-Up
1Attach the Network Cable included with the Base Unit and plug one end into the network port on the
Base Unit. Plug the other end of the cable into the Internet modem, router, switch, hub or RJ-45 network wall jack.
2Firmly plug the Power Adapter (AC Adapter) into the base unit. You can utilize the hook on the base to
secure it rmly and to prevent it from being accidentally dislodged. The power supply should be connected to
an electrical outlet, power bar, surge protector or UPS.
3Once the base unit is connected it will go through a regular connection process which may take up to 10 minutes.
Once you see the solid green status light, the base is ready and you can proceed in powering up the phones.
4If the status light remains red or amber after 10 minutes, try plugging the base unit directly into the
modem instead of any secondary devices (router, switch, hub etc.).
5Please call Comwave Business Support if the status light does not turn solid green.
Panasonic TGP600
Base Unit

2 of 2
comwave business care | [email protected] | 1-866-500-4107
Important Information
Environment
Keep the phone and base away from heating appliances and devices that generate electrical noise such as
uorescent lamps and motors. These noise sources can interfere with performance.
Do not place the phone or base in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F).
The range of operation depends on the topography of your oce, weather, or usage conditions as signals are
transmitted between the base unit and the handset/desk phone by radio waves. If there are obstacles such as
walls, noise may interfere with your telephone calls. In particular, high metal shelves or reinforced concrete walls
will restrict operating range.
A handset / desk phone may not work when it is too far from the base unit depending on the structure of the building.