Panasonic H-PS14042PP User manual

file:///C|/U.../Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_cvr.xml[11/12/2018 3:52:27 PM]
ORDER NO. DSC1110056CE
B26
Interchangeable Lens for Digital Camera
Model No. H-PS14042PP
H-PS14042E
H-PS14042GK
Colour
Vol.1
(S)...........Silver Type
(K)...........Black Type
© Panasonic Corporation 2011 Unauthorized copying and distribution is a violation of law.

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_01.xml[11/12/2018 3:52:49 PM]
1 Service Navigation
1.1 Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.

1.2 Important Notice
1.2.1 About LENS MAIN BLOCK UNIT (Ref. 203)
1. This Service Manual does not contain the repair service information for “LENS MAIN BLOCK UNIT”(Ref.203), because it requires
special facilities and equipment.
2. 
3. In case of the “LENS MAIN BLOCK UNIT”(Ref.203) defects, contact to the service department of sales company.
Fig. 1-1
4. No adjustment is required when replacing the part mentioned on Fig. 1-1. But, when tighten the concerned screws, apply proper
torque mentioned on “5. Disassembly and Assembly Instructions” section.

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_02.xml[11/12/2018 3:53:05 PM]
2 Specifcations

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:53:47 PM]
3 Operating Instructions
3.1 Before Use
3.2 Cautions For Use

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:53:47 PM]
3.3 Components

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:53:47 PM]
3.3.1 Accessories
3.3.2 Attaching/Detaching the Lens

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:53:47 PM]

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:08 PM]
3 Operating Instructions
3.1 Before Use
3.2 Cautions For Use

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:08 PM]
3.3 Components

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:08 PM]
3.3.1 Accessories
3.3.2 Attaching/Detaching the Lens

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:08 PM]

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:32 PM]
3 Operating Instructions
3.1 Before Use
3.2 Cautions For Use

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:32 PM]
3.3 Components

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:32 PM]
3.3.1 Accessories
3.3.2 Attaching/Detaching the Lens

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_03.xml[11/12/2018 3:54:32 PM]

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_04.xml[11/12/2018 3:54:52 PM]
4 Service Fixture & Tools
4.1 Service Fixture and Tools
The following Service Fixture and Tools are used for checking and servicing this unit.
4.2 Clean Box

(Federal Standard 209D).

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_05.xml[11/12/2018 3:55:27 PM]
5 Disassembly and Assembly Instructions
5.1 Outline
Proceed disassemble and assemble, by referring the following table Fig. 5-1.
Important:
1. It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to “4.2. Clean Box” section of this service manual for detailes.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front &
rear), other than necessary cases.
3. 
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. 
Fig. 5-1

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_05.xml[11/12/2018 3:55:27 PM]
5.2 Precautions for Disassembly and Assembly
5.2.1 Removal of the Decoring
1. Decoring is sticked on the lens(1).
2. Put the sheet so that the lens glass is fully covered.
3. Insert the needle to Gap (A) (between the Decoring and lens glass), and peel off the Decoring gently.
5.2.2 Installation of the Decoring
1. Align the hole of Decoring and the character "LUMIX G", and then stick them.
Use new Decoring. (Do not use the one which is removed.)After installing the Decoring, press the Decoring with your


file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_05.xml[11/12/2018 3:55:27 PM]

file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_06.xml[11/12/2018 3:55:53 PM]
6 Maintenance
6.1 Notice in external cleaning
6.1.1 Dust / Dirt on the outer casing part (s)
1. 
2. 
6.1.2 Dust / Dirt on the Lens Glasses

1. When it is outside surface of the lens:
When the dust and/or dirt gets on the outer side surface of the Lens glasses, order the following procedures.
1. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not Blow too strongly.)
2. Wipe out the dirt on the lens glass surface with Lens cleaning KIT(BK) (VFK1900BK) if necessary.
(Consult the Instruction sheet which is included in the Lens cleaning KIT(BK) in details.)