Panasonic H-HSA35100PP User manual

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_cvr.xml[11/12/2018 3:47:57 PM]
ORDER NO.DSC1703009CE
B26
Interchangeable Lens for Digital Camera
Model No. H-HSA35100PP
H-HSA35100E
H-HSA35100GK
© Panasonic Corporation 2017 Unauthorized copying and distribution is a violation of law.

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_01.xml[11/12/2018 3:48:21 PM]
1 Safety Precautions
1.1 Information for Your Safety

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_01.xml[11/12/2018 3:48:21 PM]

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_01.xml[11/12/2018 3:48:21 PM]
1.2 Cautions for use

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_02.xml[11/12/2018 3:49:12 PM]
2 Service Navigation
2.1 Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model
Please place orders using the parts list and not the drawing reference numbers.

2.2 Important Notice
2.2.1 About LENS MAIN UNIT (Ref. 220)
1. 
lens adjustments.

2. 
205), to maintain Serial number of owner's original lens. Fig. 1-1
3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply proper torque

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_02.xml[11/12/2018 3:49:12 PM]
mentioned on "6. Disassembly and Assembly Instruction" section.

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_03.xml[11/12/2018 3:49:33 PM]
3 Specifcations
3.1 Specifcations (Rated)

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_03.xml[11/12/2018 3:49:33 PM]
3.2 Accessories

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_03.xml[11/12/2018 3:49:33 PM]

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_04.xml[11/12/2018 3:49:51 PM]
4 Location of Controls and Components

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_05.xml[11/12/2018 3:50:12 PM]
5 Service Fixture & Tools
5.1 Service Fixture and Tools
The following Service Fixture and Tools are used for Checking & Servicing for this unit.
5.2 Clean Box

10,000 (Federal Standard 209D).
[NOTE]


file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
6 Disassembly and Assembly Instructions
6.1 Outline

Important:
1. It is recommended dealing with Clean Box, to keep maintaining the dustproof environment.
(Refef to "5.2. Clean Box " section of this Service Manual for details.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front & rear), other
than necessary cases.
3. 
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. 
following.
Caution
Keep covering the lens unit with Lens caps (front & rear), other than necessary
cases.
6.2 Disassembly Flow Chart
6.3 Disassembly Procedure
Important:


Less than class 10,000(Federal Standard 209D))

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
6.3.1 Removal of the Zoom Rubber
1. Remove the Zoom Rubber.
6.3.2 Removal of the Decoration Ring
1. The Decoration Ring is sticked on the Lens Top Unit.
2. Put the sheet so that the lens glass is fullty covered.
3. 
6.3.3 Removal of the Lens Top Unit and the Dustproof Rubber
1. Remove 3 screws (A) and the Lens Top Unit.
2. Remove the Dustproof Rubber.

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
6.3.4 Removal of the Shading Frame
1. Remove 3 screws (B) and the Shading Frame.
6.3.5 Removal of the L Mount Unit and the Lens Mount Rubber
1. Remove screw (C) and 4 screws (D).
2. Insert 4 Adjustment Shafts (VMS7941 or an equivalent one) to screw holes in order notto remove Adjustment washes.
3. Remove the L Mount Unit.

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
4. Remove the Lens Mount Rubber.
6.3.6 Removal of the Lens Mount Spacer
1. Lift up and remove the Lens Mount Spacer slowly.
6.3.7 Removal of the Rear Frame Unit and the OIS Switch
1. Disconnect the Connector of the Main P.C.B..
2. Remove 4 screws (E) and the Rear Frame Unit.
3. 
4. Remove the OIS Switch.

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
6.3.8 Removal of the Main P.C.B. and the Mount Contact Unit
1. Disconnect 4 connectors of the Main P.C.B..
2. Remove the Main P.C.B. and the Moount Contact Unit.
3. Remove the Mount Connect Unit from Main P.C.B..
6.4 Assembly Flow Chart
6.5 Assembly procedure

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
Important:
1. 
6.5.1 Installation of the Mount Contact Unit and the Main P.C.B.
1. Connect FPC of the Mount Connect Unit to connector of the Main P.C.B..
2. Installation the Main P.C.B. with the Mount Contact Unit.
3. Connect FPCs to 4 connectors of the Main P.C.B..
6.5.2 Installation of the OIS Switch and the Rear Frame Unit
1. Install the OIS Switch in the following state.
2. Apply "CEMEDINE SUPER X 8008 BLACK" (Commercial Item) to the following 2 points after installing the OIS Switch.

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
3. Connect FPC to connector of the Main P.C.B..
4. 
6.5.3 Installation of the Lens Mount Spacer
1. Put the Lens Mount Spacer on the Rear Frame Unit slowly.

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
6.5.4 Installation of the Lens Mount Rubber and the L Mount Unit
1. Install the Lens Mount Rubber.
2. Install the L Mount Unit.
3. Remove the 4 Adjustment Shafts (VMS7941 or an equivalent one).
4. 

file:///C|/U...emp/Rar$EXa0.519/viewing/SGML_VIEW_DATA/ALL/H-HSA35100PP/SVC/DSC1703009CE/doc/DSC1703009CE_06.xml[11/12/2018 3:50:43 PM]
6.5.5 Installation of the Shading Frame
1. Install the Shading Frame.
2. 
6.5.6 Installation of the Dustproof Rubber and the Lens Top Unit
1. Install the Dustproof Rubber.